DIN EN 16510-1:2023-02
Residential solid fuel burning appliances - Part 1: General requirements and test methods; German version EN 16510-1:2022 / Note: DIN EN 12809 (2005-08), DIN EN 12809 Berichtigung 1 (2008-06), DIN EN 12815 (2005-09), DIN EN 12815 Berichtigung 1 (2008-06), DIN EN 13229 (2005-10), DIN EN 13229 Berichtigung 1 (2008-06), DIN EN 13240 (2005-10), DIN EN 13240 Berichtigung 1 (2008-06) and DIN EN 16510-1 (2018-11) remain valid alongside this standard until 2025-11-30.
| Fecha edición: |
2023-02-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This European Standard is applicable to residential solid fuel burning appliances of which the direct heat output is more than 6 % of the combined direct and indirect heat output at nominal heat output. It specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM) emission test methods, howeverit does not contain any values for the limit on these emissions. This document does cover as well appliances intended to carry the load of a chimney. This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. It is also not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. |
| Keywords: | Boilers|Burning periods|Calibration|Carbon monoxide|CE marking|Certificates of conformity|Certification (approval)|Characteristics|Chimney breasts|Classification|Combustion air|Components|Conformity|Conformity testing|Convection|Cookers|Cooking appliances|Cooking equipment|Definitions|Design|Designations|Determination|Efficiency|Electrical safety|Emission|Equipment|Equipment safety|Exhaust gas connection pieces|Exhaust gases|Fire places|Firm|Fixed|Flow analysis|Flow coefficient|Fuel oil stoves|Fuels|Funnels|Furnaces|Heat generators|Heaters|Heating elements|Heating engineering|Heating equipment|Heating installations|Heating ranges|Heating technics|Heating water|Industrial heat-water-installations|Inserts for open fire places|Inspection|Installation instructions|Installations|Instructions|Instructions for use|Interpretations|Investigations|Letterings|Manual loading|Marking|Materials|Mathematical calculations|Methods|Nominal thermal output|Open fire places|Operating instructions|Operational instructions|Peat|Performance|Pollution control|Power output|Production|Production control|Properties|Qualification tests|Room heaters|Safety|Safety engineering|Safety of products|Safety requirements|Safety tests|Sampling methods|Slow combustion|Slow combustion stoves|Solid fuels|Solid-fuelled devices|Space-heating systems|Specification (approval)|Steel grades|Stoves|Testing|Thermal efficiency|Thermal environment systems|Tiled stoves|Water heating |
| ICS: | 97.100.30 - Aparatos de calefacción por combustibles sólidos |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 16510-1:2022 |
|
Reemplazo Normas |
Reemplaza a DIN EN 12809 Berichtigung 1:2008-06 Reemplaza a DIN EN 12815:2005-09 Reemplaza a DIN EN 12815 Berichtigung 1:2008-06 Reemplaza a DIN EN 13229:2005-10 Reemplaza a DIN EN 12809:2005-08 Reemplaza a DIN EN 13240:2005-10 Reemplaza a DIN EN 13240 Berichtigung 1:2008-06 Reemplaza a DIN EN 16510-1:2018-11 Reemplaza a DIN EN 16510-1:2021-04 Reemplaza a DIN EN 13229 Berichtigung 1:2008-06 |










