DIN EN 16510-2-6:2023-02
Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers; German version EN 16510-2-6:2022 / Note: DIN EN 14785 (2006-09) and DIN EN 14785 Berichtigung 1 (2007-10) remain valid alongside this standard until 2025-11-30.
| Fecha edición: |
2023-02-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This Part 2-6 of European Standard EN 16510 applies to space heaters, built-in appliances and cookers fired by wood pellets and fed mechanically, up to a rated heat input of 50 kW. These appliances typically consume auxiliary energy, which is also measured in this standard. For built-in pellet appliances and especially their testing, additional information from EN 16510-2-2 is required. For pellet cookers and especially their testing, additional information from EN 16510-2-3 is required. Non-mechanically fed appliances burning solid mineral fuels, peat briquettes and natural or man-made logs are not included in this European Standard but are covered by EN 16510-2-1 to EN 16510-2-5. The appliances covered in this Part 2-6 provide heat to the room in which they are installed. They can be operated either with natural draught or with fan-assisted combustion air. If equipped with a boiler, they can also provide domestic hot water and/or central heating. These appliances only burn wood pellets according to the appliance manufacturer's instructions. They only operate with the firebox door closed. This European Standard is not applicable to appliances - with boilers intended for water systems with water temperatures above 110 °C and 3 bar; - with boilers intended for water systems in direct contact with sanitary hot water; - with a purely horizontal flue (through the wall of the building) - with flue gas condensation in the unit; - switching on and off at partial load operation. This Part 2-6 of EN 16510 shall be used in conjunction with EN 16510-1 and includes the requirements and test methods for space heaters, built-in appliances and cookers fired by wood pellets. |
| Keywords: | CE marking|Certificates of conformity|Certification (approval)|Classification|Conformity|Conformity testing|Convection|Cookers|Definitions|Design|Designations|Efficiency|Emission|Energy consumption|Equipment safety|Exhaust gases|Fire places|Fuel oil stoves|Fuels|Furnaces|Heat generators|Heaters|Heating equipment|Heating installations|Heating technics|Household use|Inspection|Installation instructions|Instructions|Marking|Materials|Mathematical calculations|Measurement|Measuring techniques|Operational instructions|Pellets|Performance|Pollution control|Power output|Production|Production control|Properties|Qualification tests|Raw material|Room heaters|Room heating appliances|Safety|Safety engineering|Safety of products|Safety requirements|Slow combustion|Solid fuel heating|Solid fuels|Space heating capacity|Space-heating systems|Specification (approval)|Stoves|Sustainability|Testing|Thermal efficiency|Thermal environment systems|Wood |
| ICS: | 97.100.30 - Aparatos de calefacción por combustibles sólidos |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 16510-2-6:2022 |
|
Reemplazo Normas |
Reemplaza a DIN EN 14785:2006-09 Reemplaza a DIN EN 14785 Berichtigung 1:2007-10 Reemplaza a DIN EN 16510-2-6:2021-04 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
