-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN 18190:2025-09

Precast concrete products - Performance assessment and declaration; German and English version prEN 18190:2025 / Note: Date of issue 2025-08-08*Intended as replacement for DIN EN 1168 (2011-12), DIN EN 12737 (2008-02), DIN EN 12794 (2007-08), DIN EN 12839 (2012-03), DIN EN 12843 (2004-11), DIN EN 13224 (2012-01), DIN EN 13225 (2013-06), DIN EN 13369 (2025-06), DIN EN 13693 (2009-10), DIN EN 13747 (2010-08), DIN EN 13978-1 (2005-07), DIN EN 14843 (2007-07), DIN EN 14844 (2012-02), DIN EN 14991 (2007-07), DIN EN 14992 (2012-09), DIN EN 15037-1 (2008-07), DIN EN 15037-2 (2011-07), DIN EN 15037-3 (2011-07), DIN EN 15037-4 (2013-08), DIN EN 15037-5 (2013-08), DIN EN 15050 (2012-06), DIN EN 15258 (2009-05), DIN EN 15435 (2008-10), DIN EN 15498 (2008-08).

Fecha edición: 2025-09-01
En Vigor
Idiomas disponibles: Alemán, Inglés
Resumen: This document covers the following precast concrete products made of unreinforced, reinforced or prestressed normal weight or light weight concrete, used in structural or non-structural applications for building and civil engineering works: - linear structural elements including columns, beams and frame, - beams with or without clay shells intended to be used in conjunction with blocks as defined hereafter for floor and roofing systems, - foundation elements, including columns with integrated foundation elements, pocket foundation elements and sockets, intended to be used in buildings, - foundation piles and segments of piles intended to be used for building and civil engineering works and installed at the site by the use of impact, vibration, pressing or other suitable techniques, - poles (also called masts), - elements for fences including posts, panels, rails and base panels, intended to be used as light-structural or non-structural elements, - bridge deck elements, - floor plates intended to be used in floor systems in conjunction with cast-in-situ concrete, - solid slabs to be attached to the exterior of a building above the ground, such as floors, roofs, landings and balconies, and solid - slabs intended to be used as structural elements, - hollow core slabs and solid slabs manufactured in the same way but without hollow core, - ribbed floor elements intended to be used for floors and roofs, - floor slats intended to be used for the housing of livestock, - shuttering blocks made of concrete and woodchip concrete, - solid, hollow core, multilayer and composite loadbearing, non-loadbearing, and cladding wall elements, solid, hollow, and multilayer special roof elements, - stairs and individual elements for the construction of stairs, - heating, ventilation and air conditioning (HVAC) flue elements intended to be used to convey heating, ventilation, and air conditioning gases, - retaining wall elements, - rectangular cross-section monolithic box culverts, designed as continuous elements intended to be used for the creation of voids below ground, cable tunnels and subways, - junction boxes, - garages as monolithic unit, or as kits of single sections or kits for double space garages. This document also covers blocks made of concrete, clay, EPS, wood, plastic, cardboard, glass reinforced plastic, agglomerated stone, metal or a combination of them and intended to be used in beam-and-blocks floor systems. The products are manufactured in factories or in temporary plants on site where production is protected against adverse weather conditions as necessary. This document does not cover: - prestressing reinforcement in box culverts, junction boxes, foundation elements, garages and HVAC flue elements, - beams inferior to 4,5 m in length used as lintels in masonry walls, - beams for beam-and-block floor systems with a total depth inferior to 60 mm or superior to 300 mm and/or designed for a spacing superior to 1,00 m at centres, - prestressed floor plates for floor systems with a nominal thickness inferior to 40 mm, or inferior to 50 mm without stiffening ribs or lattice girder, - floor plates for floor systems with a very smooth upper face according to EN 1992-1-1:2004, 6.2.5, - hollow core slabs or solid slabs manufactured in the same way but without hollow cores with dimensions superior to: depth: 500 mm for prestressed elements and 300 mm for reinforced elements, width: 1200 mm without transverse reinforcement and 2400 mm with transverse bottom reinforcement, - floor slats for livestock for loadings other than stock and stockmen, and prestressed single slat beams, (Please refer to document CEN/TC 229 N2407 for the complete scope)

Keywords: Additives|Aggregate water|Animal housing facilities|Animal husbandry|Assembling kits|Base materials|Beams|Bending strength|Bins|Blocks|Boards|Breaking load|Breaking strength|Bricks|Bridge construction|Bridges|Buildings|Bulk density|Capacitive loads|CE marking|Ceiling tiles|Ceilings|Cements|Ceramics|Chain link fencing|Checks|Chemical reactions|Chloride content|Classes|Classification|Climate|Columns|Components|Composite beams|Composite boards|Composite materials|Composite means|Compounds|Compressive strength|Concrete blocks|Concrete boardings|Concrete bridges|Concrete components|Concrete composition|Concrete cover|Concrete element|Concrete floors|Concrete poles|Concrete products|Concrete slabs|Concrete strength|Concrete structures|Concretes|Concreting|Conformity|Conformity assessment|Conformity testing|Connections|Construction|Construction documents|Construction materials|Construction works|Constructional products|Consuption of material|Control charts|Core slab|Corrosion|Dangerous materials|Definitions|Design|Detection of corrosion|Deviations|Dimensional deviations|Dimensional tolerances|Dimensioning|Dimensions|Documentation|Drive bolts|Dry bulk density|Drying|Durability|Duration|Earthing|Evaluations|Fasteners|Features|Fences|Fillers|Finished product|Finishes|Fire resistance|Fire risks|Fitness for purpose|Floor constructions|Floors|Foot bridges|Formwork|Foundations|Fracture|Frost|Garages (domestic)|General section|Geometry|Girder floor|Girders|Handling|Height|Hollow blocks|Hollow box|In-situ concrete|Inspection|Insulating materials|Intermediate building components|Lightweight concrete|Load capacity|Load measurement|Loading|Manufacturing|Marking|Masts|Materials|Materials specification|Mathematical calculations|Measure|Measurement|Measuring techniques|Mechanic|Methods of manufacture|Noise control (acoustic)|Normal concrete|Output determination|Panels|Performance|Performance requirements|Physical properties|Pile foundations|Piles|Planning|Plastics|Plates|Polystyrene|Precast concrete|Precast concrete parts|Prefabricated|Prefabricated buildings|Prefabricated ceilings|Prefabricated garage|Prefabricated parts|Prefabricated wall panels|Pressurized components|Prestress|Prestressed concrete|Prestressed concrete compound units|Prestressed concrete masts|Prestressing steels|Pretensioned prestressed concrete|Product specifications|Product standards|Production|Production control|Properties|Pylons|Quality|Quality assurance|Quality requirements|Railway bridges|Ready-mixed concrete|Reinforced concrete|Reinforced concrete floors|Reinforced concrete masts|Reinforced concrete structures|Reinforcement|Reinforcing bars|Reinforcing steels|Resistance|Retaining walls|Rigid foams|Road bridges|Rod shaped|Roofing|Roofing slabs|Roofs|Rules|Safety requirements|Sampling methods|Shape|Sheets|Shuttering blocks|Slab|Slab floors|Slatted floors|Soils|Solid concrete|Sound|Sound insulation|Specification (approval)|Stability|Stable floors|Stairs|Stays|Steel plates|Steels|Stone|Strength of materials|Stress|Structural members|Structural steel work|Structural steels|Structures|Supports|Surface properties|Surface spread of flame|Surfaces|Surveillance (approval)|Technical documents|Temperature|Tensile strength|Test results|Test specimens|Testing|Thermal insulation|Thermal properties|Thermal protection|Tolerances (measurement)|Transport|Types|Useful load|Variations|Verification|Wall plates|Walls|Water absorption|Weathering resistance|Wheel works|Wind loading|Winds|Wires|Wood|Woodbased sheet materials
ICS: 91.100.30 - Hormigón y productos de hormigón
CTN:

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas