DIN EN 1991-1-2/A1:2026-06
Eurocode 1 - Actions on structures - Part 1-2: Actions on structures exposed to fire; German and English version EN 1991-1-2:2024/prA1:2026 / Note: Date of issue 2026-05-08*Intended as an amendment to DIN EN 1991-1-2 (2021-10).
| Fecha edición: |
2026-06-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Alemán, Inglés |
| Resumen: | 1.1 Scope of EN 1991 12(1) The methods given in this Eurocode are applicable to buildings and civil engineering works, with a fire load related to the building and its occupancy. (2) EN 1991 12 deals with thermal and mechanical actions on structures exposed to fire. It is intended to be used in conjunction with the fire design Parts of EN 1992 to EN 1996 and EN 1999 which give rules for designing structures for fire resistance. (3) EN 1991 12 contains thermal actions either nominal or physically based. More data and models for physically based thermal actions are given in annexes. (4) EN 1991 12 does not cover the assessment of the damage of a structure after a fire. (5) EN 1991 12 does not cover supplementary requirements concerning, for example: - the possible installation and maintenance of sprinkler systems; - conditions on occupancy of building or fire compartment; - the use of approved insulation and coating materials, including their maintenance. 1.2 Assumptions (1) In addition to the general assumptions of EN 1990 the following assumptions apply: - any active and passive fire protection systems taken into account in the design will be adequately maintained; - the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation. |
| Keywords: | Aeration|Anchorages|Balconies|Basis|Buildings|Burning behaviours|Calorific value|Classification|Combustible|Combustion|Components|Construction|Construction engineering|Construction engineering works|Construction materials|Construction works|Definitions|Deflection|Design|Determinations|Dimensioning|Effects|Eurocode|Exploitation|Fire|Fire conditions|Fire hazards|Fire load|Fire propagation|Fire resistance|Fire risks|Fire safety|Flames|Force|Gases|Heat transfer|Inspection|Liquids|Load capacity|Load measurement|Loading|Mass|Mathematical calculations|Mechanical properties|Methods|Methods of calculation|Operating load|Planning|Plastics|Properties|Quality control|Reinforcement|Relative density|Rim holes|Self weight|Solids|Specification (approval)|Stability|Statics|Structural engineering drawings|Structures|Surveillance (approval)|Temperature|Temperature behaviour|Testing|Thermal|Thermics|Useful load|Ventilation|Weight (mass)|Weights|Winds |
| ICS: | 13.220.50 - Resistencia al fuego de los materiales y elementos de construcción, 91.010.30 - Aspectos técnicos |
| CTN: |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
