DIN EN 1996-3:2010-12
Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures; German version EN 1996-3:2006 + AC:2009 / Note: To be replaced by DIN EN 1996-3 (2021-10).
| Fecha edición: |
2010-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This part of Eurocode 6 provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application: - walls subjected to vertical loading and wind loading; - walls subjected to concentrated loads; - shear walls; - basement walls subjected to lateral earth pressure and vertical loads; - walls not subject to vertical loads. The rules are consistent with those given in Part 1-1, but are more conservative in respect of the conditions and limitations of their use. |
| Keywords: | Accessories|Air spaces|Basis|Beams|Bending|Bending strength|Blankets|Boards|Bond|Bricks|Brickwork|Buildings|Categories|Ceilings|Cellars|Classes|Components|Compressive strength|Concretes|Conditions|Connections|Consoles|Construction|Construction engineering works|Construction materials|Construction systems parts|Constructional products|Creep|Cutting forces|Definitions|Design|Determinations|Deviations|Dimensioning|Disks|Ductility|Durability|Earthquakes|Effects|Elastic properties (fluids)|Elongation|Environment|Environmental conditions|Eurocode|Expansions|Fall|Fire safety|Fitness for purpose|Flaws|Frames|Friction|Frost|Geometry|Height|Insulations|Joints|Kinks|Knees|Layout|Load capacity|Load factor|Loading|Loss|Masonry|Mathematical calculations|Mechanical properties|Methods of calculation|Modulus of elasticity|Moisture|Mortars|Mounting|Nonreinforced|Openings|Overall heights|Panels|Passages|Pressure of earth|Prestressing steels|Production|Properties|Reduction|Reinforcement|Rim|Roofs|Rules|Safety|Sand|Sealing|Shear modul|Shear strength|Shrinking|Simple|Simplifications|Soils|Specification (approval)|Stability|Status|Steels|Strain|Stress|Strips|Structures|Supporting behaviour|Supports|Temperature|Thermal insulation|Treatment|Verification|Walls|Washers|Width|Wind loading |
| ICS: | 91.010.30 - Aspectos técnicos, 91.080.30 - Estructuras de fábrica |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 1996-3:2006/AC:2009 |
|
Reemplazo Normas |
Reemplaza a DIN 1053-1:1996-11 Reemplaza a DIN 1053-100:2007-09 Reemplaza a DIN EN 1996-3:2006-04 Reemplaza a DIN EN 1996-3 Berichtigung 1:2010-01 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
