DIN EN 1998-2:2011-12
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges; German version EN 1998-2:2005 + A1:2009 + A2:2011 + AC:2010 / Note: To be replaced by DIN EN 1998-2 (2022-12).*To be amended by DIN EN 1998-2/A1 (2026-04).
| Fecha edición: |
2011-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This Standard covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases. |
| Keywords: | Abutment|Ageing (materials)|Bearings|Behaviour|Bending stress|Bond|Bottom|Bridges|Brittle fractures|Building code|Circular cross section|Civil engineering|Columns|Complete|Compression|Concretes|Conformity|Conformity assessment|Connections|Construction|Construction engineering works|Construction works|Constructions|Cording-up|Criterion|Damage|Definitions|Design|Dimensioning|Direction|Displacements|Earthquake protection|Earthquake-resistant design|Earthquakes|Elastic|Elastomers|Eurocode|Fitness for purpose|Force|Foundations|Insulations|Insulators|Interaction|Jigs|Joints|Kinks|Limitations|Load capacity|Locations|Loss|Marking|Mass|Mathematical calculations|Mechanical hazards|Methods|Piles|Position|Protective walls|Reduction|Regulations|Reinforcement|Seismic coefficient|Seismic loading|Seismology|Shape|Soils|Specification (approval)|Spectra|Stability|Steels|Stiffness|Strain|Strength of materials|Strength provings|Structural design|Structure|Structures|Superstructures|Time history|Transportable|Velocity|Verification|Vibration|Water|Wave propagation |
| ICS: | 93.040 - Construcción de puentes, 91.120.25 - Protección contra los seísmos y las vibraciones |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 1998-2:2005/A2:2011 |
|
Reemplazo Normas |
Reemplaza a DIN EN 1998-2:2010-12 Reemplaza a DIN EN 1998-2/A2:2010-10 |










