DIN EN 1998-2/A1:2026-04
Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges; German and English version EN 1998-2:2025/prA1:2026 / Note: Date of issue 2026-02-27*Intended as an amendment to DIN EN 1998-2 (2011-12).
| Fecha edición: |
2026-04-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Alemán, Inglés |
| Resumen: | EN 1998-2 is intended to be applied to the design of new bridges in seismic regions. It covers the design of reinforced concrete, steel and composite steel-concrete bridges and provides guidance for the design of timber bridges. EN 1998-2 is applicable to the seismic design of bridges exploiting ductility in structural members or through the use of antiseismic devices. When ductility is exploited, this part primarily covers bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of arched bridges, although its provisions should not be considered as fully covering these cases. Suspension bridges and masonry bridges, moveable bridges and floating bridges are not included in the scope of EN 1998-2. |
| Keywords: | Abutment|Ageing (materials)|Bearings|Behaviour|Bending stress|Bond|Bottom|Bridges|Brittle fractures|Building code|Circular cross section|Civil engineering|Columns|Complete|Compression|Concretes|Conformity|Conformity assessment|Connections|Construction|Construction engineering works|Construction works|Constructions|Cording-up|Criterion|Damage|Definitions|Design|Dimensioning|Direction|Displacements|Earthquake protection|Earthquake-resistant design|Earthquakes|Elastic|Elastomers|Eurocode|Fitness for purpose|Force|Foundations|Insulations|Insulators|Interaction|Jigs|Joints|Kinks|Limitations|Load capacity|Locations|Loss|Marking|Mass|Mathematical calculations|Mechanical hazards|Methods|Piles|Position|Protective walls|Reduction|Regulations|Reinforcement|Seismic coefficient|Seismic loading|Seismology|Shape|Soils|Specification (approval)|Spectra|Stability|Steels|Stiffness|Strain|Strength of materials|Strength provings|Structural design|Structure|Structures|Superstructures|Time history|Transportable|Velocity|Verification|Vibration|Water|Wave propagation |
| ICS: | 93.040 - Construcción de puentes, 91.120.25 - Protección contra los seísmos y las vibraciones |
| CTN: |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
