DIN EN 303-6/A1:2023-01
Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation and energy performance of water heaters and combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German and English version EN 303-6:2019/prA1:2022 / Note: Date of issue 2022-11-25*Intended as an amendment to DIN EN 303-6 (2019-12).
| Fecha edición: |
2023-01-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Alemán, Inglés |
| Resumen: | This document is composed of two parts. The first part supplements EN 303-1, EN 303-2, EN 303-4 and EN 304, hereafter called boiler standards. It specifies the supplementary requirements and tests for the construction, safety, rational use of energy, fitness for purpose, classification and marking related to the domestic hot water operation of oil-fired water heaters and combination boilers. The domestic hot water is produced on either the instantaneous or storage principle. The domestic hot water production is integrated or coupled, the whole being marketed as a single unit. The second part covers the energy performance of domestic hot water production of the appliances covered by the first part. This second part sets out a method for assessing the energy performance of the appliances. It defines a number of daily tapping cycles for each domestic hot water use such as kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of combination boilers and water heaters to be compared and matched to the needs of the user. The heat output of the appliances covered by this standard does not exceed 400 kW. In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit. This standard only covers type testing. |
| Keywords: | Air-blast burners|Atomizing oil burners|Boilers|Burners|Calorific value vessels|Central heating|Classification|Construction requirements|Density|Design|Dimensioning|Drinking water installations|Electrical equipment|Electrical safety|Energy consumption|Energy performance|Fans|Heating equipment|Heating technics|Heating water|Hot-water boilers|Marking|Nominal thermal output|Oils|Passages|Potable water|Qualification tests|Quality|Safety requirements|Specification (approval)|Steam boilers|Stores|Structural systems|Tanks|Temperature|Testing|Thermal environment systems|Thermal properties|Thermal testing|Types|Utilization of energy|Water heaters|Water heating|Water heating devices|Water heating installations |
| ICS: | 91.140.10 - Sistemas de calefacción central, 91.140.65 - Aparatos para producción de agua caliente sanitaria |
| CTN: |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
