DIN EN 60169-23:1994-02
Radio-frequency connectors; part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (IEC 60169-23:1991); German version EN 60169-23:1993 / Note: A transition period, as set out in DIN EN IEC 61169-23 (2026-07), exists until 2028-10-31.
| Fecha edición: |
2026-07-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Alemán |
| Resumen: | Coaxial line devices and systems are becoming more prevalent at frequencies above 18 GHz. The document covers a precision pin and socket connector for use with 3,5 mm rigid precision coaxial lines so as to minimize test apparatus errors attributable to coaxial connectors. These connectors are constructed so as to affix on the 50 Ohm, 3,5 mm rigid precision coaxial line described in IEC 457-5, and to provide low reflection to 34 GHz. For mated pairs, a reflection factor of 0,003 + 0,00135f (GHz) is typical for GPC connectors. These connectors may be, and often are, mated with SMA connectors. Koaxialanordnungen und -systeme werden immer häufiger bei Frequenzen oberhalb 18 GHz betrieben. Das Dokument beschreibt einen Präzisionsstecker und -kuppler für den Einsatz an 3,5 mm Präzisionsrohrleitungen, welche den Fehlbeitrag durch koaxiale Steckverbinder an den Prüfgeräten gering halten sollen. Diese Steckverbinder sind so aufgebaut, daß sie an 50 Ohm 3,5 mm Präzisionsrohrleitungen, wie sie in IEC 457-5 beschrieben sind, montiert werden können und bis 34 GHz geringe Reflexionsfaktoren aufzeigen. Für ein zusammengestecktes Paar ist bei GPC-Steckverbindern ein Reflexionsfaktor von 0,003 + 0,00135f (GHz) typisch. Diese Steckverbinder können, und dies ist häufig der Fall, mit SMA-Steckverbindern zusammengesteckt werden. |
| Keywords: | Bushes (mechanical components)|Coaxial cables|Coaxial line|Diameter|Electric plugs|Electrical engineering|Female connectors|High frequencies|Male connectors|Plugs|Radio-frequency plugs|Rigid |
| ICS: | 33.120.30 - Conectores para frecuencias radioeléctricas |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 60169-23:1993 Idéntica IEC 60169-23:1991 |
|
Reemplazo Normas |
Es reemplazada por DIN EN IEC 61169-23:2026-07 |










