DIN EN 755-8:2016-10
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 755-8:2016
| Fecha edición: |
2016-10-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded porthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube, see Figure 2), supplied in straight lengths. This standard only applies to extruded porthole tube for general engineering applications made in the following alloys: - EN AW-1050A, EN AW-1200, EN AW-1350; - EN AW-3003, EN AW-3103; - EN AW-5005, EN AW-5005A, EN AW-5049, EN AW-5051A, EN AW-5251, EN AW-5052; - EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-6005A, EN AW-6008, EN AW-6110A, EN AW-6012, EN AW-6014, EN AW-6018, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW-6261, EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081, EN AW-6082; EN AW-6182, - EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020. The temper designations used in this part are according to EN 515. This standard only applies to tube produced by the tube porthole/bridge method. This standard does not apply to: - extruded tubes produced by the seamless, die/mandrel method (EN 755-7), - tubes delivered in coils (EN 13957), - coiled tubes cut to length (EN 13957). |
| Keywords: | Aluminium|Aluminium alloys|Aluminium profile|Bars (materials)|Dimensions|Eccentricity|Extruded|Extruded sections|Fixed length|Form tolerances|Limit deviations|Materials|Non-ferrous alloys|Non-ferrous metals|Pipes|Poles|Profile|Seamless|Straightness|Tolerances (measurement)|Tools|Wall thicknesses|Width across flats |
| ICS: | 77.150.10 - Productos de aluminio |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 755-8:2016 |
|
Reemplazo Normas |
Reemplaza a DIN EN 755-8:2008-06 Reemplaza a DIN EN 755-8:2015-12 Reemplaza a DIN EN 755-8 Berichtigung 1:2009-02 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
