-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN ISO 10352:2020-12

Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area (ISO 10352:2020); German version EN ISO 10352:2020

Fecha edición: 2020-12-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This document specifies a method for the determination of the mass per unit area. It also specifies five methods (Method A to Method E) for the determination of the fibre mass per unit area of moulding compounds and prepregs. The five methods are as follows: - Method A: Extraction by Soxhlet; - Method B: Extraction by immersion in solvent in a beaker; - Method C: Decomposition by loss ignition; - Method D: Extraction by wet combustion; - Method E: Method by calculation. This document is applicable to the following types of materials: - moulding compound and preimpregnated unidirectional sheet, tape, fabric and mats; - prepregs in which any type of reinforcement (aramid, carbon, glass, etc.) and any type of matrix (thermosetting or thermoplastic) has been used. Typically, reinforcement fibres are coated with sizing or finishes. These normally dissolve with the resin and are, therefore, included in the resin content. This document is not applicable to the following types of prepregs: - those containing reinforcements which are soluble (or partly soluble) in the solvents used to dissolve the resin.

Keywords: Compression moulding materials|Definitions|Density measurement|Determination|Extraction|Fabrics|Fibre reinforced|Immersion|Losses on ignition|Mathematical calculations|Mats|Moulding materials|Mouldings (shaped section)|Physical testing|Plastics|Preimpregnated|Prepreg|Reinforced plastics|Samples|Soxhlet|Substance|Test specimens|Testing
ICS: 83.120 - Plásticos reforzados
CTN:

Equivalencia Internacional

Idéntica EN ISO 10352:2020

Idéntica ISO 10352:2020

Reemplazo Normas

Reemplaza a DIN EN ISO 10352:2011-04

Reemplaza a DIN EN ISO 10352:2019-08

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas