DIN EN ISO 10882-2:2024-12
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2024); German version EN ISO 10882-2:2024
| Fecha edición: |
2024-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document provides guidance for the determination of personal exposure to gases and vapours in welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove metals: (111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/ (114) Self-shielded tubular-cored arc welding (131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/ (135) Metal active gas welding; MAG welding; gas metal arc welding /USA/ (136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/ (137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/ (141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/ (15) Plasma arc welding; (31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/ (52) Laser beam welding; (912) Flame brazing; torch brazing /USA/ (97) Braze welding; arc and flame gouging; arc and laser cutting processes; flame and plasma cutting processes; metal-spraying (see EN ISO 4063). The following gases and vapours which can be produced or be present during welding and allied processes are covered: ozone (O3); carbon monoxide (CO); carbon dioxide (CO2); nitric oxide (NO) and nitrogen dioxide (NO2); vapours produced in the welding or cutting of metals having paint or other surface coatings. Fuel, oxidant and shielding gases used in welding and allied processes are not covered. The general background level of gases and vapours in the workplace atmosphere influences personal exposure, and therefore the role of fixed point measurements is also considered. |
| Keywords: | Air pollution|Analysis|Breathing|Carbon dioxide|Carbon monoxide|Cloth|Concentration|Concentration (chemical)|Concentration of particles|Dangerous materials|Definitions|Fuel gases|Gases|Health protection|Hygiene|Inhaled air|Laboratories|MAK-value|Measurement|Measurement of gases|Measuring|Measuring techniques|Methods|Methods for measuring|Nitric oxide|Nitrogen dioxide|Nitrogen oxides|Occupational safety|Operating stations|Organic|Ozone|Particles|Particulate|Particulate matter|Particulate matter measurement|Personal health|Personnel|Pollutant gases|Pollution of the air|Protective gases|Respiratory protections|Sampling methods|TRK-value|Vapours|Welders|Welding|Welding engineering|Welding processes|Working conditions (physical)|Working place concentration|Working places|Works|Zones of reach |
| ICS: | 25.160.01 - Soldeo, soldeo fuerte y soldeo blando en general, 13.100 - Seguridad en los puestos de trabajo. Higiene industrial |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 10882-2:2024 Idéntica ISO 10882-2:2024 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 10882-2:2001-04 Reemplaza a DIN EN ISO 10882-2:2023-06 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
