DIN EN ISO 11111-7:2016-12
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005 + Amd 1:2009 + Amd 2:2016); German version EN ISO 11111-7:2005 + A1:2009 + A2:2016 / Note: DIN EN ISO 11111-7 (2009-12) remains valid alongside this standard until 2016-12-31.*Applies in conjunction with DIN EN ISO 11111-1 (2016-12).
| Fecha edición: |
2016-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | ISO 12100-1:2003 has been replaced with ISO 12100:2010 to which reference is made in this part of ISO 11111. In addition EN 999:1998/A1:2008 has been replaced with EN ISO 13855:2010 to which reference is made in this part of ISO 11111, too. Subsequently, the new standards have to be considered in a second Amendment. This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. It specifies significant hazards and corresponding safety requirements and/or measures for dyeing and finishing machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used in preparation, dyeing, printing, fixation, wetting, drying, finishing and making-up/presentation, as specified in Clause 5. This part of ISO 11111 is complemented by the type C standards ISO 9902-1and ISO 9902-7 with respect to noise emission measurement and ISO 23771 with respect to measures for the reduction of noise emissions. |
| Keywords: | Access|Accessories|Accident prevention|Adjustments|Agitators|Architraves|Arms|Bars (materials)|Batching|Bearings|Boards|Bodies|Bonnets|Bottom|Braid|Burners|Cabling|Catwalks|CE marking|Cheese dyeing|Chemicals|Circuits|Cleaning|Close|Cloth|Commissioning|Components|Control|Control devices|Control equipment|Control panels|Control systems|Conveyor belts|Corners|Cutting|Cutting device|Cylinders|Defects|Design|Dimensions|Doors|Drawing-in|Drying|Dust|Dyeing equipment|Edge|Effects|Electric shock|Electrical equipment|Electrical hazards|Electromagnetic compatibility|Electronic equipment|Electrostatics|Emergency shutdown|Emergency-off|Energy|Energy supply systems (buildings)|Entanglement hazards|Environmental effect|Equipment safety|Ergonomics|Explosions|Failure|Feed hoppers|Fencing|Fingers|Finishes|Finishing machines|Fire|Fixings|Foot|Force|Gear boxes|Grabs|Graphic symbols|Grilles|Hand control|Handlings|Hands (anatomy)|Hazards|Head (anatomy)|Heat|Hydraulics|Impact|Injuries|Instructions for use|Ionizing|Lasers|Latches|Layout|Leakage paths|Lids|Lighting systems|Limitations|Machines|Maintenance|Manual operation|Marking|Materials|Mechanical components|Mechanical crimping|Mechanical hazards|Methods of calculation|Mounting|Noise (environmental)|Noise reduction|Open|Operating conditions|Operating instructions|Operating mode|Operation|Overcurrent|Overload|Parts|Pneumatics|Power transmission systems|Pressure|Principles|Printing|Protection devices|Radiation|Rails|Repairs|Rescue|Restart|Risk|Risk reduction|Ropes|Safety|Safety of machinery|Safety of products|Safety requirements|Selection|Sensitivity|Shafts|Shearing|Shut down|Slipping|Spark|Specification (approval)|Stabs|Staging|Staples|Start|Start preventor|Stumble|Surfaces|Switchgear|Tearing machines|Temperature|Testing|Textile finishing|Textile finishing machinery|Textile machinery|Textile machines|Textiles|Thermal hazards|Transport|Two-hand operation|Type of machine|User information|Vapours|Ventilators|Wheels|Winding|Windows |
| ICS: | 59.120.50 - Equipo para tinte y acabado |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 11111-7:2005/A2:2016 Idéntica ISO 11111-7:2005/Amd 2:2016 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 11111-7:2009-12 Reemplaza a DIN EN ISO 11111-7/A2:2015-04 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
