DIN EN ISO 12217-2:2026-04
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2022); German version EN ISO 12217-2:2025 / Note: To be replaced by DIN EN ISO 12217-2 (2026-05).
| Fecha edición: |
2026-04-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This document is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or may be applied if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes:inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217;gondolas and pedalos;surfboards including sailing surfboards; andhydrofoils and foil stabilized boats when not operating in the displacement mode. This document does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate. |
| Keywords: | Aquatic sports equipment|Assessment|Boats|Buoyancy|Categories|Classification|Definitions|Design|Equipment safety|Hulls|Inspection|Instructions for use|Length|Marking|Minimum requirements|Navigation|Operating instructions|Overall length|Pleasure boats|Properties|Safety|Safety engineering|Safety of products|Safety requirements|Safety signs|Sailing boats|Sails|Specification (approval)|Stability|Stabilization|Testing|Vessels |
| ICS: | 47.080 - Pequeñas embarcaciones, 47.020.10 - Cascos y sus elementos estructurales |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 12217-2:2025 Idéntica ISO 12217-2:2022 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 12217-2:2016-03 Reemplaza a DIN EN ISO 12217-2:2021-01 Reemplaza a DIN EN ISO 12217-2/A100:2017-12 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
