DIN EN ISO 12846:2012-08
Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012); German version EN ISO 12846:2012
| Fecha edición: |
2012-08-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This International Standard specifies two methods for the determination of mercury in different types of water (including waste water after appropriate pre-digestion). For the first method described in Clause 6, an enrichment step by amalgamation of the Hg on e. g. a gold/platinum absorber is used. For the method given in Clause 7, the enrichment step is omitted.The method with enrichment has usually a concentration range from 0,002 µg/l to 1 µg/l and the method without enrichment starts at 0,1 µg/l as the lower limit of the working range. It is up to the user to decide whether higher concentrations should be determined by omitting the enrichment step and/or by diluting the sample(s). The sensitivity of both methods is dependent on the selected operating conditions. In general the determination of trace concentrations of Hg by AAS is highly depending on clean operating conditions in the lab and on high purity chemicals with negligible low Hg blanks. |
| Keywords: | AAS|Atomic absorption spectrophotometry|Chemical reactions|Chemicals|Concentration|Determination|Determination of content|Drinking water|Ground water|Health protection|Mass concentration|Mercury|Mercury compounds|Potable water|Rainwater|Sampling methods|Sewage|Surface water|Testing|Water|Water analysis|Water practice|Water quality|Water samples|Water testing|Waters |
| ICS: | 13.060.50 - Determinación de sustancias químicas en el agua |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 12846:2012 Idéntica ISO 12846:2012 |
|
Reemplazo Normas |
Reemplaza a DIN EN 1483:2007-07 Reemplaza a DIN EN 12338:1998-10 Reemplaza a DIN EN ISO 12846:2010-11 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
