DIN EN ISO 15156-3:2025-02
Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020); German version EN ISO 15156-3:2020 / Note: To be replaced by DIN EN ISO 15156-3 (2026-03).
| Fecha edición: |
2025-02-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H<(Index)2>S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. This document addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC). This document is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions. This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156-1:2020, Clause 5. This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. |
| Keywords: | Alloy steels|Alloys|Corrosion|Corrosion resistance|Corrosion-resistant materials|Cracking|Cracking (petroleum)|Definitions|Design|Environment|Gas extraction|High-alloy steels|Limits (mathematics)|Low-alloy steels|Marking|Materials|Materials specification|Natural gas extraction|Natural gas industries|Oil industries|Personal health|Petroleum|Petroleum extraction|Physical properties|Resistance to crack formation|Safety|Specification (approval)|Steels|Suitability|Temperature|Testing |
| ICS: | 75.180.01 - Equipo para las industrias del petróleo y del gas natural en general |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 15156-3:2020 Idéntica ISO 15156-3:2020 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 15156-3:2015-12 Reemplaza a DIN EN ISO 15156-3:2020-09 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
