DIN EN ISO 17508:2026-01
Packaging - Transport packaging for dangerous goods - Compatibility testing of polyethylene, fluorinated polyethylene and co-extruded plastic (ISO 17508:2025); German version EN ISO 17508:2025
¿Abrumado/a por la IA?
Pasa de la teoría a la práctica con el Taller de IA: Fundamentos Prácticos y Maestría. Próximo 4 de Junio
¡RESERVA TU PLAZA AQUÍ!| Fecha edición: |
2026-01-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies test methods for the determination of the plastics compatibility of packaging/intermediate bulk containers (IBC) made from polyethylene, fluorinated polyethylene and coextruded plastics. It covers the determination of adequate plastics compatibility against the processes of deterioration: - softening due to absorption (swelling); - stress cracking; and - combinations thereof. It applies to: - drums and containers made from plastics according to paragraph 6.1.4.8 of the UN recommendations 1); - composite packaging (plastics) with inner receptacle made from plastics according to paragraph 6.1.4.19 of the UN recommendations; - rigid plastics IBCs (types 31H1 and 31H2) according to 6.5.5.3 of the UN recommendations; and - composite IBCs with rigid plastics inner receptacles (type 31HZ1) according to 6.5.5.4 of the UN recommendations; whose design is approved by a competent authority for the transport of liquid dangerous goods. This proof of adequate plastics compatibility is only applicable to the above packaging and IBC types of the following materials and material specifications: - packaging and IBCs made from polyethylene (PE); - packaging and IBCs made from polyethylene (PE), whose internal surfaces are fluorinated; and - packaging and IBCs which are coextrusion blow moulded and have walls with the following multilayer structure (from inside to outside): - polyamide (PA)//bonding agents//polyethylene (PE); or - ethyl vinyl alcohol (EVOH)//bonding agents//polyethylene (PE). 1) UN Recommendations on the Transport of Dangerous Goods - Model Regulations |
| Keywords: | Absorption|Barrels (containers)|Canisters|Chemical compatibility|Coextrusion|Compatibility|Composite packages|Containers|Danger|Dangerous|Dangerous goods|Dangerous materials|Fluorinated|Freight transport|Impairment damage|Intermediate bulk containers|Large size packages|Liquid materials|Materials|Packages|Packaging|Plastics|Polyethylene|Stress cracking behaviour|Stress cracks|Swelling|Tensile impact strength|Test pieces|Test specimens|Testing|Testing fluids|Transport|Transport of dangerous goods|Transport packing|Verification |
| ICS: | 55.020 - Embalajes y distribución de mercancías en general, 13.300 - Protección contra materias peligrosas |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 17508:2025 Idéntica ISO 17508:2025 |
|
Reemplazo Normas |
Reemplaza a DIN 2002:2020-02 Reemplaza a DIN EN ISO 17508:2024-09 |
Normas citadas
Libros relacionados
Normas relacionadas
Otras colecciones temáticas
