DIN EN ISO 18563-2:2024-12
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Array probes (ISO 18563-2:2024); German version EN ISO 18563-2:2024
| Fecha edición: |
2024-12-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies the characterization tests performed at the end of the fabrication of an array probe. It defines both methodology and acceptance criteria. This document is applicable to array probes used for ultrasonic non-destructive testing (phased array technique or signal processing technique, e. g. FMC-TFM) in contact technique (with or without a wedge or delay line) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MH. This document does not give methods and acceptance criteria to characterize the performance of an ultrasonic phased array instrument or the performance of a combined system. These are given in ISO 18563-1 and in ISO 18563-3. |
| Keywords: | Arrays|Calibration blocks|Characterisations|Definitions|Inspection equipment|Non-destructive testing|Performance tests|Probe|Specifications|Testing|Ultrasonic flaw detector|Ultrasonic test systems|Ultrasonics|Verification |
| ICS: | 19.100 - Ensayos no destructivos |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 18563-2:2024 Idéntica ISO 18563-2:2024 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 18563-2:2017-12 Reemplaza a DIN EN ISO 18563-2:2023-12 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
