-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN ISO 18752:2025-09

Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2025); German version EN ISO 18752:2025

Fecha edición: 2025-09-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This document specifies requirements for ten classes, four grades and seven types of wire- or textilereinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. They are suitable for use with: — oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from ?40 °C to +100 °C for types AS, AC, BS and BC hoses and from ?40 °C to +120 °C for types CS, CC and DC hoses. — water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from ?40 °C to +70 °C. — water at temperatures ranging from 0 °C to +70 °C. This document does not specify requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

Keywords: Classification|Dimensional tolerances|Dimensions|Fluid engineering|Fluid technology|Hose assemblies|Hoses|Hydraulic fluids|Hydraulic hoses|Marking|Materials|Packages|Physical properties|Plastics hose|Properties|Reinforced hoses|Rubber hoses|Specification|Specification (approval)|Storage|Synthetic rubber|Testing|Vulcanized rubber|Water supply engineering|Wire cores|Wire nettings
ICS: 23.040.70 - Tuberías flexibles
CTN:

Equivalencia Internacional

Idéntica ISO 18752:2025

Idéntica EN ISO 18752:2025

Reemplazo Normas

Reemplaza a DIN EN ISO 18752:2022-08

Reemplaza a DIN EN ISO 18752:2024-08

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas