-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN EN ISO 2431:2020-02

Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09); German version EN ISO 2431:2019

Fecha edición: 2020-02-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This Standard specifies a method for determining the flow time of paints, varnishes and related products that can be used to control consistency. Four flow cups of similar dimensions, but having orifice diameters of 3 mm, 4 mm, 5 mm and 6 mm, are specified. Two methods for checking the flow cups for wear and tear are given. Flow cups with a replaceable jet are not covered by this Standard as the close tolerances on the supply of the material under test to the jet are not met. Commonly used dipping flow cups are also not covered by this Standard. In general, the fabrication tolerances for such flow cups are greater than those of the flow cups specified in this International Standard. Therefore flow time determinations with dipping flow cups give a precision which is lower than that obtained with the flow cups specified in this Standard. The method is limited to testing materials for which the breakpoint of the flow from the orifice of the flow cup can be determined with certainty. This point is difficult to determine and reproduce for materials with flow times near the upper limit of the measurement range (100 s) due to slowing-down effects.
Keywords: Calibration|Coating materials|Coatings|Consistency|Definitions|Design|Designations|Determination|Dimensions|Finishes|Flow cups|Flow measurement|Flow properties|Flow time|Lacquers|Materials testing|Measurement|Measuring techniques|Paints|Sampling methods|Test equipment|Test performance|Test reports|Testing|Time measurement|Varnishes|Viscosity
ICS: 87.040 - Pinturas y barnices
CTN:

Equivalencia Internacional

Idéntica EN ISO 2431:2019

Idéntica ISO 2431:2019

Reemplazo Normas

Reemplaza a DIN EN ISO 2431:2012-03

Reemplaza a DIN EN ISO 2431:2018-08

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas

Más información