DIN EN ISO 3210:2018-03
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017); German version EN ISO 3210:2017
| Fecha de anulación: |
2025-12-01
Anulada
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies methods of assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the loss of mass after immersion in acid solution(s). This International Standard consists of the following two methods. - Method 1: assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in a phosphoric acid based solution, without prior acid treatment. - Method 2: assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in a phosphoric acid based solution with prior acid treatment. Method 1 is applicable to anodic oxidation coatings intended for decorative or protective purposes or where resistance to staining is important. Method 2 is applicable to anodic oxidation coatings intended for outdoor architectural purposes. For less severe applications, Method 1 may be more suitable. The methods are not applicable to the following: - hard-type anodic oxidation coatings which normally are not sealed; - anodic oxidation coatings that have been sealed only in dichromate solutions; - anodic oxidation coatings produced in chromic acid solutions; - anodic oxidation coatings that have undergone a treatment to render them hydrophobic. The methods are destructive and can serve as reference methods in case of doubt or dispute regarding the results of the test for loss of absorptive power (ISO 2143), or the measurement of admittance (ISO 2931). |
| Keywords: | Acid resistance|Acid-resistance tests|Acids|Alloys|Aluminium|Aluminium alloys|Anodic|Anodic coating|Anodic oxidation|Coatings|Corrosion|Corrosion tests|Degreasing|Destructive testing|Immersion|Immersion tests (corrosion)|Inorganic|Inspection|Light metals|Loss of mass|Materials testing|Measurement|Measuring techniques|Metal coatings|Non-destructive testing|Non-ferrous metals|Non-metallic coatings|Oxide coatings|Testing |
| ICS: | 25.220.20 - Tratamiento de superficies |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 3210:2017 Idéntica ISO 3210:2017 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 3210:2010-12 Reemplaza a DIN EN ISO 3210:2016-12 Es reemplazada por DIN EN ISO 3210:2025-12 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
