DIN EN ISO 52017-1:2018-04
Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017); German version EN ISO 52017-1:2017
| Fecha edición: |
2018-04-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This document specifies the general assumptions, boundary conditions and equations for the calculation, under transient hourly or subhourly conditions, of the internal temperatures (air and operative) and/or the heating, cooling and humidification and dehumidification loads to hold a specific (temperature, moisture) set point, in a single building zone. No specific numerical techniques are imposed by this document. Specific calculation procedures based on the generic calculation procedures of this document are given in ISO 52016-1. The specific simplifications, assumptions and boundary conditions in ISO 52016-1 are tailored to the respective application areas, such as the energy need for heating and cooling and for humidification and dehumidification, hourly internal temperature, design heating and cooling and humidification and dehumidification load. |
| Keywords: | Air conditioners|Air temperatures|Algorithms|Ambient temperatures|Buildings|Calculation formula|Coefficients|Comfort|Components|Construction|Cooling|Cooling loads|Criteria for calculations|Data|Definitions|Dimensioning|Effect of heating|Energy|Energy consumption|Energy demands|Energy performance|Energy Performance of Buildings|EPB|General conditions|Heat|Heat balance|Heat dissipation|Heat engineering|Heat flow|Heat requirement|Heat transfer|Heating energy|Heating equipment|Heating installation|Heating loads|Indoor climate|Indoors|Internal temperature|Mathematical calculations|Methods|Methods of calculation|Overheating|Part of buildings|Procedures|Radiation|Room air temperature|Rooms|Service installations in buildings|Solar radiant exposure|Solar radiation|Summer|Surface temperatures|Temperature|Temperature coefficients|Testing|Thermal|Thermal behaviour of structures|Thermal comfort|Thermal insulation|Thermal properties|Thermal protection|Thermal storage|Thermal transmission coefficient|Thermal transmittance|Transfer coefficient|Validation|Ventilation |
| ICS: | 91.120.10 - Aislamiento térmico de edificios, 13.020-45 - |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 52017-1:2017 Idéntica ISO 52017-1:2017 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 13791:2012-08 Reemplaza a DIN EN 15255:2007-11 Reemplaza a DIN EN ISO 52017-1:2015-03 Reemplaza a DIN EN ISO 13792:2012-08 Reemplaza a DIN EN 15265:2007-11 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
