DIN EN ISO 8130-11:2019-08
Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019); German version EN ISO 8130-11:2019
| Fecha edición: |
2019-08-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This part of ISO 8130 specifies a comparative method for determining the flow characteristics of a fused thermosetting coating powder down a plane inclined at a set angle to the horizontal. The aim of the test described in this part of ISO 8130 gives an indication of the degree of melt flow that may occur during the curing of the coating powder. This characteristic contributes to the surface appearance and to the degree of coverage over sharp edges. The test is a comparative method for checking for batch to batch variation in the behaviour of a given coating powder. Correlation between the results from coating powders of differing composition is not to be expected. This method is not suitable for coating powders which have gel times of less than one minute at the test temperature when characterised according to ISO 8130-6. The method is also not suitable for textures powders. |
| Keywords: | Abilities to flow|Air|Air quality|Calculation formula|Calorific values|Coating materials|Concentration|Conglomerates|Flow analysis|Flow properties|Interpretations|Paints|Particulate materials|Powder|Powder coatings|Powdery|Properties|Sampling methods|Test standards|Testing|Varnishes |
| ICS: | 87.040 - Pinturas y barnices |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 8130-11:2019 Idéntica ISO 8130-11:2019 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 8130-11:2011-02 Reemplaza a DIN EN ISO 8130-11:2018-04 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
