DIN EN ISO 898-1:2013-05
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013
| Fecha edición: |
2013-05-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of this part of ISO 898 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures. |
| Keywords: | Alloy steels|Bolts|Breaking load|Brinell hardness|Carbon steels|Carbonization|Carburization|Carburizing|Cheese head screws|Chemical composition|Close-fit threads|Definitions|Delivery conditions|Designation systems|Designations|Elongation at fracture|External-thread fasteners|Fasteners|Hardness|Hardness measurement|HB|Heat treatment|Hexagon head screws|Hexagon sockets|Inspection by attributes|ISO screw threads|Left-hand screw threads|Marking|Materials|Mechanical properties|Mechanical properties of materials|Normal threads|Notched bar impact work|Partial decarburization|Peripheral decarburization|Physical properties|Proof stress|Properties|Rockwell|Screws (bolts)|Specifications|Steels|Strength class|Strength of materials|Studs (fasteners)|Surfaces|Tensile strength|Tensile testing|Test forces|Testing|Testing voltages|Threads|Vickers hardness|Yield strength |
| ICS: | 21.060.10 - Pernos, tornillos y bulones |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 898-1:2013/AC:2013 Idéntica ISO 898-1:2013/Cor 1:2013 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 898-1:2009-08 Reemplaza a DIN EN ISO 898-1/A1:2010-04 |










