DIN EN ISO 898-3:2021-11
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018 + Amd 1:2020); German version EN ISO 898-3:2018 + A1:2021
| Fecha edición: |
2021-11-01
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | This part of ISO 898 specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2. Washers that conform to the requirements of this part of ISO 898 are evaluated at an ambient temperature range of 10 °C to 35 °C. These washers are used in applications at low or high temperatures up to a maximum temperature of +300 °C.This part of ISO 898 is applicable to the following flat captive and non-captive washers made of carbon steel, alloy steel, spring or alloy spring steel, with thickness from 0,2 mm to 12 mm: - plain washers (with or without knurls/chamfers); - square washers; - square hole washers; - shaped plates. It does not specify requirements for such properties as: - corrosion resistance; - weldability. |
| Keywords: | Alloy steels|Carbon steels|Carburization|Carburizing|Cheese head screws|Chemical composition|Designation systems|Designations|Fasteners|Hardness|Hardness measurement|HV|Marking|Materials|Mechanical properties|Mechanical properties of materials|Microscopic analysis|Nuts|Physical properties|Properties|Rockwell|Rockwell hardness|Screwed joints|Screws (bolts)|Shallow|Specifications|Spring steels|Strength class|Strength of materials|Surface decarburization|Surfaces|Tensile testing|Test forces|Testing|Vickers|Vickers hardness|Washers |
| ICS: | 21.060.20 - Tuercas |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN ISO 898-3:2018/A1:2021 Idéntica ISO 898-3:2018/Amd 1:2020 |
|
Reemplazo Normas |
Reemplaza a DIN EN ISO 898-3:2018-09 Reemplaza a DIN EN ISO 898-3/A1:2020-03 |










