-50% de descuento* Si compras la misma norma UNE en distintos idiomas. * Dto. sobre el pvp inferior. Ver condiciones

DIN ISO 2285:2022-11

Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2019)

Fecha edición: 2022-11-01
En Vigor
Idiomas disponibles: Inglés, Alemán
Resumen: This document specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elongation or constant loading. The constant-elongation test is intended to measure the ability of rubbers to retain their elastic properties after extension, at a standard laboratory temperature, to a specified strain which is maintained for a specified time at the same or at a specified higher temperature and then released at the test temperature or at the standard laboratory temperature. The constant-load test specifies a method for the determination of elongation, creep and tension set of rubbers subjected to a constant load at standard laboratory temperature. The test methods are intended to measure the elastic properties of rubber in the hardness range 20 IRHD to 94 IRHD. The creep measurement is not intended for product design or the evaluation of low-creep materials. For these, ISO 8013 applies, and there is no agreement between the results of this test and those of ISO 8013.

Keywords: Behaviour|Definitions|Determination|Elastic properties (fluids)|Elastomers|Elongation|Flow|High temperatures|High-temperature testing|Materials testing|Measurement|Measuring techniques|Permanent elongation|Rubber|Standard temperature|Strain|Stretching strain|Temperature|Tensile loading|Tensile testing|Tension set|Testing|Testing devices|Thermoplastic polymers|Vulcanizated rubber|Vulcanized materials|Vulcanized rubber
ICS: 83.060 - Elastómeros
CTN:

Equivalencia Internacional

Idéntica ISO 2285:2019

Reemplazo Normas

Reemplaza a DIN ISO 2285:2013-12

Reemplaza a DIN ISO 2285:2022-08

El libro en palabras del autor

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.

Button
Preguntas frecuentes ¿Tienes alguna duda sobre nuestros productos?

Respuesta 2

Desde la web

Libros y normas