-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

IEC 60335-2-89:2019

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor

Edition date: 2019-06-20
In Force
Available languages: Spanish, English, French
Summary: IEC 60335-2-89:2019 specifies safety requirements for electrically operated commercial refrigerating appliances and ice-makers that have an incorporated motor-compressor or that are supplied in two units for assembly as a single appliance in accordance with the instructions (split system).
Examples of appliances that are within the scope of this standard are
- refrigerated display and storage cabinets;
- refrigerated trolley cabinets;
- service counters and self-service counters;
- blast chillers and blast freezers;
- commercial ice-makers.
As far as is practicable, this standard deals with the common hazards presented by these types of appliances including those that use flammable refrigerants and appliances employing R 744 refrigerant.
This International Standard is not applicable to appliances with a mass of flammable refrigerant exceeding the limits specified in 22.110 or to appliances with that use refrigerants with a toxicity classification of B according to ISO 817.
It does not cover those features of construction and operation of refrigerating appliances that are dealt with in ISO standards.
Attention is drawn to the fact that
- for appliances intended to be used in vehicles or aboard ships or aircraft, additional requirements can be necessary;
- in many countries, additional requirements are specified by national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to
- appliances using flammable refrigerant in transcritical refrigeration systems;
- domestic refrigerating appliances (IEC 60335-2-24);
- split systems having a refrigerant charge of flammable refrigerant exceeding 150 g in any refrigerating circuit;
- industrial refrigerating systems;
- motor-compressors (IEC 60335-2-34);
- commercial dispensing appliances and vending machines (IEC 60335-2-75);
- commercial ice-cream appliances;
- cold temperature rooms;
- multiple refrigerated chambers with a remote motor-compressor.
This third edition cancels and replaces the second edition published in 2010, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- the text has been aligned with Ed 5.2 of Part 1;
- some notes have been deleted or converted to normative text (4, 5.2, 7.6, 22.111, 22.111.1);
- some subclauses have been renumbered (22.103, 22.104, 22.105, 22.106, 22.107, 22.109, 22.110, 22.111, 22.112, 22.113, 22.114, 22.115);
- requirements for commercial ice-makers have been added (5.7, 5.101, 7.1, 11.8, 19.102);
- installation of appliances with a remote refrigerant unit or motor-compressor has been clarified (5.10, 11.2);
- installation instructions for appliances with a remote refrigerant unit employing R-744 refrigerant in a transcritical refrigeration system have been added (7.12.1);
- a pressure test for appliances employing R-744 refrigerant has been added (22.7);
- additional refrigerants have been added to Table 102 and it has been updated to reference only ISO 817 and ISO 5149-1 data;
- additional requirements for appliances with a refrigerant charge exceeding 150 g of flammable refrigerant within each refrigerating circuit have been added (7.1, 21.103, 22.108, 22.110, 22.116, 22.117, 22.118, 22.119, 22.120, 22.121, Annex CC);
- Annex AA has been modified to cover motors that are supplied at a voltage that is different from the rated voltage of the appliance;
- Annex BB has been updated to align with the latest edition of IEC 60079-15.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard.
The contents of the corrigendum 1 of September 2019, corrigendum 2 of August 2021 and corrigendum 3 of September 2023 have been included in this copy.

L'IEC 60335-2-89:2019 spécifie des exigences de sécurité concernant les appareils de réfrigération électriques et les fabriques de glace à usage commercial qui ont un motocompresseur incorporé ou qui sont fournis sous forme de deux unités en vue d'un assemblage en un seul appareil conformément aux instructions (système split).
Exemples d'appareils relevant du domaine d'application de la présente norme
- meubles frigorifiques de vente et de stockage;
- chariots roulants réfrigérés;
- comptoirs de service et comptoirs de self-service;
- refroidisseurs à jet d'air et congélateurs à jet d'air;
- fabriques de glace à usage commercial.
Dans la mesure où la pratique le permet, la présente norme traite des dangers courants présentés par ces types d'appareils, y compris ceux qui utilisent des fluides frigorigènes inflammables et les appareils utilisant le fluide frigorigène R 744.
La présente Norme internationale n'est pas applicable aux appareils dont la masse de fluide frigorigène inflammable est supérieure aux limites spécifiées en 22.110, ou aux appareils qui utilisent des fluides frigorigènes de classification de toxicité B selon l'ISO 817.
Elle ne traite pas des caractéristiques de construction et de fonctionnement des appareils de réfrigération qui font l'objet de normes ISO.
L'attention est attirée sur le fait que
- pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires;
- dans de nombreux pays, des exigences complémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l'alimentation en eau et par des organismes similaires.
La présente norme ne s'applique pas aux
- appareils utilisant des fluides frigorigènes inflammables dans des systèmes de réfrigération transcritiques;
- appareils de réfrigération à usage domestique (IEC 60335-2-24);
- systèmes split ayant une charge de fluide frigorigène inflammable dépassant 150 g dans tout circuit de réfrigération;
- systèmes de réfrigération industriels;
- motocompresseurs (IEC 60335-2-34);
- distributeurs commerciaux avec ou sans moyen de paiement (IEC 60335-2-75);
- sorbetières à usage commercial;
- chambres froides;
- chambres réfrigérées multiples à motocompresseur à distance.
Cette troisième édition annule et remplace la deuxième édition parue en 2010, son Amendement 1:2012 et son Amendement 2:2015. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- le texte a été aligné sur l'Édition 5.2 de la Partie 1;
- certaines notes ont été supprimées ou converties en texte normatif (4, 5.2, 7.6, 22.111, 22.111.1);
- certains paragraphes ont été renumérotés (22.103, 22.104, 22.105, 22.106, 22.107, 22.109, 22.110, 22.111, 22.112, 22.113, 22.114, 22.115);
- des exigences concernant les fabriques de glace à usage commercial ont été ajoutées (5.7, 5.101, 7.1, 11.8, 19.102);
- l'installation des appareils avec une unité de fluide frigorigène ou un motocompresseur à distance a été clarifiée (5.10, 11.2);
- des instructions d'installation des appareils avec une unité de fluide frigorigène à distance utilisant du R-744 dans un système de réfrigération transcritique ont été ajoutées (7.12.1);
- un essai de pression pour les appareils utilisant du fluide frigorigène R-744 a été ajouté (22.7);
- des fluides frigorigènes supplémentaires ont été ajoutés au Tableau 102, qui a été mis à jour et ne référence plus que les données de l'ISO 817 et de l'ISO 5149-1;
- des exigences complémentaires ont été ajoutées concernant les appareils dont la charge frigorigène est supérieure à 150 g de fluide frigorigène inflammable dans chaque circuit de réfrigération (7.1, 21.103, 22.108, 22.110, 22.116, 22.117, 22.118, 22.119, 22.120, 22.121, Annexe CC);
- l'Annexe AA a été modifiée afin de couvrir les moteurs alimentés à une tension différente de la tension assignée de l'appareil;
- l'Annexe BB a été mise à jour en vue de son alignement sur la dernière édition de l'IEC 60079-15.
La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1 et ses amendements. Elle a été établie sur la base de la cinquième édition (2010) de cette norme.
Le contenu du corrigendum 1 de septembre 2019, le corrigendum 2 d'août 2021 et le corrigendum 3 de septembre 2023 a été pris en considération dans cet exemplaire.

ICS: 97.130.20-Commercial refrigerating appliances
CTN: TC 61/SC 61C - 1349

Standards Cancellations

Anula a IEC 60335-2-89:2010/ISH1:2014

Anula a IEC 60335-2-89:2010/AMD2:2015

Anula a IEC 60335-2-89:2010/AMD1:2012

Anula a IEC 60335-2-89:2010

Correcciones Normas

Es corregida por IEC 60335-2-89:2019/COR1:2019

Es corregida por IEC 60335-2-89:2019/COR3:2023

Es corregida por IEC 60335-2-89:2019/COR2:2021

Otras Relaciones

Acuerdo de Frankfurt FprEN IEC 60335-2-89:2021

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

 

The use of standards and other content protected by intellectual property rights in AI systems is prohibited. If you are interested in such uses, please contact normas@aenor.com. Failure to comply will result in the withdrawal of your Access licence.

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.