Filtrar:
DIN
DIN 18870:2025-03
En Vigor
2025-12-01
Equipment for commercial kitchens - Limits for wastegas heat losses of
catering equipments / Note: Date of issue 2025-02-14
DIN
DIN EN 13763-24:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
24: Verification of electrical non-conductivity of shock tubes; German
version EN 13763-24:2025
DIN
DIN EN ISO 10993-16:2025-12
En Vigor
2025-12-01
Biological evaluation of medical devices - Part 16: Toxicokinetic
evaluation for degradation products and leachables (ISO/DIS
10993-16:2025); German and English version prEN ISO 10993-16:2025 /
Note: Date of issue 2025-11-21*Intended as replacement for DIN EN ISO
10993-16 (2018-02).
DIN
DIN EN ISO 16911-1:2025-09
En Vigor
2025-09-01
Stationary source emissions - Manual and automatic determination of
velocity and volume flow rate in ducts - Part 1: Manual reference method
(ISO/DIS 16911-1:2025); German and English version prEN ISO 16911-1:2025
/ Note: Date of issue 2025-08-08*Intended as replacement for DIN EN ISO
16911-1 (2013-06).
DIN
DIN EN 12681-1:2025-09
En Vigor
2025-09-01
Founding - Radiographic testing - Part 1: Film techniques; German and
English version prEN 12681-1:2025 / Note: Date of issue
2025-07-25*Intended as replacement for DIN EN 12681-1 (2018-02).
DIN
DIN EN ISO 787-24:2025-09
En Vigor
2025-09-01
General methods of test for pigments and extenders - Part 24:
Determination of relative tinting strength of coloured pigments and
relative scattering power of white pigments - Photometric methods
(ISO/DIS 787-24:2025); German and English version prEN ISO 787-24:2025 /
Note: Date of issue 2025-08-22*Intended as replacement for DIN EN ISO
787-24 (1995-10).
DIN
DIN EN 13206:2025-12
En Vigor
2025-12-01
Plastics - Thermoplastic covering films for use in agriculture and
horticulture; German version EN 13206:2025
DIN
DIN EN ISO 9073-8:1998-10
En Vigor
2025-12-01
Textiles - Test methods for non-wovens - Part 8: Determination of liquid
strike-through time (simulated urine) (ISO 9073-8:1995); German version
EN ISO 9073-8:1998
DIN
DIN ISO 362-1:2024-12
En Vigor
2025-12-01
Acoustics - Engineering method for measurement of noise emitted by
accelerating road vehicles - Part 1: M and N categories (ISO
362-1:2022); Text in German and English / Note: Date of issue 2024-10-25
DIN
DIN 65428:2025-07
En Vigor
2025-07-01
Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with
protruding head; Text in German and English
DIN
DIN EN 9300-120:2025-09
En Vigor
2025-09-01
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital
technical product documentation such as 3D, CAD and PDM data - Part 120:
CAD 3D explicit geometry with graphic product and manufacturing
information; English version EN 9300-120:2023
DIN
DIN EN ISO 28399:2025-08
En Vigor
2025-08-01
Dentistry - External tooth bleaching products (ISO/DIS 28399:2025);
German and English version prEN ISO 28399:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO 28399 (2021-07).
DIN
DIN 51111:2024-02
En Vigor
2024-02-01
Electrical properties of fresh and used oils from electric drives in
vehicles - Measurement of the specific electrical conductivity, the
relative permittivity (<(Index)r>) and the dielectric dissipation
factor (tan )
DIN
DIN 51446-1:2025-11
En Vigor
2025-11-01
Testing of lubricants - Lithium hydroxide and lithium carbonate in
greases - Part 1: Calculation of the percentage of free lithium
hydroxide and lithium carbonate in greases thickened with lithium soaps
only / Note: Date of issue 2025-10-03
DIN
DIN EN ISO 11177:2025-11
En Vigor
2025-11-01
Vitreous and porcelain enamels - Inside and outside enamelled valves and
pressure pipe fittings for untreated and potable water supply - Quality
requirements and testing (ISO/DIS 11177:2025); German and English
version prEN ISO 11177:2025 / Note: Date of issue 2025-09-26*Intended as
replacement for DIN EN ISO 11177 (2019-08).
DIN
DIN EN 13763-21:2004-03
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 21:
Determination of flash-over voltage of electric detonators; German
version EN 13763-21:2003
DIN
DIN EN ISO 15614-2:2025-12
En Vigor
2025-12-01
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 2: Arc welding of aluminium
and its alloys (ISO 15614-2:2025); German version EN ISO 15614-2:2025
DIN
DIN EN 1999-1-5/NA:2025-10
En Vigor
2025-10-01
National Annex to DIN EN 1999-1-5:2024-11 - Eurocode 9 - Design of
aluminium structures - Part 1-5: Shell structures / Note: Applies in
conjunction with DIN EN 1999-1-5 (2024-11).
DIN
DIN EN 13630-2:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 2:
Determination of thermal stability of detonating cords and safety fuses;
German and English version prEN 13630-2:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 3210:2025-12
En Vigor
2025-12-01
Anodizing of aluminium and its alloys - Assessment of quality of sealed
anodic oxidation coatings by measurement of the loss of mass after
immersion in acid solution(s) (ISO 3210:2025); German version EN ISO 3210:2025
DIN
DIN 22100-3:2025-09
En Vigor
2025-09-01
Plastics articles and materials for use in underground mines - Part 3:
Spiral air ducts and flat air ducts - Safety requirements, testings,
marking / Note: DIN 22100-3 (2010-10) and DIN 22100-4 (2010-10) remain
valid alongside this standard until 2026-02-28.
DIN
DIN EN ISO 5530-1:2025-09
En Vigor
2025-09-01
Wheat flour - Physical characteristics of doughs - Part 1: Determination
of water absorption and rheological properties using a farinograph (ISO
5530-1:2025); German version EN ISO 5530-1:2025
DIN
DIN ISO 1817:2025-09
En Vigor
2025-09-01
Rubber, vulcanized or thermoplastic - Determination of the effect of
liquids (ISO 1817:2024); Text in German and English / Note: Date of
issue 2025-08-15*Intended as replacement for DIN ISO 1817 (2016-11).
DIN
DIN
DIN EN ISO/IEEE 11073-10425:2024-06
En Vigor
2025-12-01
Health Informatics - Device interoperability - Part 10425: Personal
health device communication - Device specialization - Continuous glucose
monitor (CGM) (ISO/IEEE FDIS 11073-10425:2024); English version prEN
ISO/IEEE 11073-10425:2024 / Note: Date of issue 2024-05-24
DIN
DIN EN ISO 18984:2024-03
En Vigor
2025-12-01
Ball valves for thermoplastics piping systems for hot and cold water
installations under pressure - Types, dimensions and requirements
(ISO/DIS 18984:2024); German and English version prEN ISO 18984:2024 /
Note: Date of issue 2024-02-02
DIN
DIN EN 613/A1:2025-08
En Vigor
2025-08-01
Independent closed-fronted gas-fired type B11, type C11, type C31 and
type C91 heaters; German and English version EN 613:2021/prA1:2025 /
Note: Date of issue 2025-07-11*Intended as an amendment to DIN EN 613 (2022-05).
DIN
DIN EN 3740:2025-08
En Vigor
2025-08-01
Aerospace series - Bolts, shouldered, thin hexagonal head, close
tolerance shank, short thread, in titanium alloy, anodized,
MoS<(Index)2> coated - Classification: 1100 MPa (at ambient
temperature)/315 °C; German and English version prEN 3740:2025 / Note:
Date of issue 2025-07-11*Intended as replacement for DIN EN 3740 (2019-12).
DIN
DIN EN 18079:2025-09
En Vigor
2025-09-01
Wood-based panels - Determination of free melamine applying extraction
and high-performance liquid chromatography (HPLC) with ultraviolet
detection; German version EN 18079:2025
DIN
DIN
DIN EN 16585-2:2022-06
En Vigor
2025-12-01
Railway applications - Design for PRM use - Equipment and components on
board rolling stock - Part 2: Elements for sitting, standing and moving;
German and English version prEN 16585-2:2022 / Note: Date of issue 2022-05-13
DIN
DIN EN ISO 7405:2019-03
En Vigor
2025-12-01
Dentistry - Evaluation of biocompatibility of medical devices used in
dentistry (ISO 7405:2018, Corrected version 2018-12); German version EN
ISO 7405:2018
DIN
DIN
DIN EN ISO 15883-1:2025-07
En Vigor
2025-07-01
Washer-disinfectors - Part 1: General requirements, terms and
definitions and tests (ISO 15883-1:2024); German version EN ISO 15883-1:2025
DIN
DIN EN 60317-59/A1:2025-09
En Vigor
2025-09-01
Specifications for particular types of winding wires - Part 59:
Polyamide-imide enamelled round copper wire, class 240 (IEC
60317-59:2015/AMD1:2024); German version EN 60317-59:2016/A1:2024 /
Note: Date of issue 2025-08-22*Intended as an amendment to DIN EN
60317-59 (2016-08).
DIN
DIN EN ISO 26304:2025-08
En Vigor
2025-08-01
Welding consumables - Solid wire electrodes, tubular cored electrodes
and electrode-flux combinations for submerged arc welding of high
strength steels - Classification (ISO 26304:2025); German version EN ISO 26304:2025
DIN
DIN EN IEC 63430:2025-11
En Vigor
2025-11-01
Data container format for wearable sensor (IEC 63430:2025); German
version EN IEC 63430:2025
DIN
DIN/TS 56951:2025-12
En Vigor
2025-12-01
Entertainment technology - Drive and control systems for safety-related
equipment / Note: DIN/TS 56951 (2020-09) remains valid alongside this
standard until 2026-05-31.
DIN
DIN EN 16584-2:2022-06
En Vigor
2025-12-01
Railway applications - Design for PRM use - General requirements - Part
2: Information; German and English version prEN 16584-2:2022 / Note:
Date of issue 2022-05-13
DIN
DIN EN ISO 19085-4:2025-12
En Vigor
2025-12-01
Woodworking machines - Safety - Part 4: Vertical panel circular sawing
machines (ISO 19085-4:2024); German version EN ISO 19085-4:2024
