Filtrar:
DIN
DIN EN ISO 45001:2023-12
En Vigor
2023-12-01
Occupational health and safety management systems - Requirements with
guidance for use (ISO 45001:2018); German and English version EN ISO 45001:2023
DIN
DIN EN ISO 27281:2025-08
En Vigor
2025-08-01
Safety requirements - Vehicle washing systems (ISO/DIS 27281:2025);
German and English version prEN ISO 27281:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN 17281 (2021-12).
DIN
DIN CEN ISO/TS 5615:2025-11
En Vigor
2025-11-01
Health informatics - Accelerating safe, effective and secure remote
connected care and mobile health through standards-based
interoperability solutions addressing gaps revealed by pandemics (ISO/TS
5615:2025); English version CEN ISO/TS 5615:2025
DIN
DIN EN 13763-21:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
21: Verification of flash-over voltage of electric detonators; German
version EN 13763-21:2025
DIN
DIN EN ISO/IEEE 11073-10471:2024-06
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10471: Personal
health device communication - Device specialization - Independent living
activity hub (ISO/IEEE FDIS 11073-10471:2024); English version prEN ISO
IEEE 11073-10471:2024 / Note: Date of issue 2024-05-24
DIN
DIN EN ISO 12628:2025-11
En Vigor
2025-11-01
Thermal insulating products for building equipment and industrial
installations - Determination of dimensions, squareness and linearity of
preformed pipe insulation (ISO 12628:2022 + Amd 1:2025); German version
EN ISO 12628:2022 + A1:2025
DIN
DIN EN ISO 23697-1:2025-08
En Vigor
2025-08-01
Water quality - Determination of total bound nitrogen
(ST-TN<(Index)b>) in water using small-scale sealed tubes - Part
1: Dimethylphenol colour reaction (ISO 23697-1:2023); German and English
version prEN ISO 23697-1:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN 13763-24:2002-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 24:
Determination of the electrical non-conductivity of shock tube; German
version EN 13763-24:2002
DIN
DIN EN 15991:2025-11
En Vigor
2025-11-01
Testing of ceramic raw materials and ceramic materials - Direct
determination of mass fractions of impurities in powders and granules of
silicon carbide by inductively coupled plasma optical emission
spectrometry with electrothermal vaporisation (ETV-ICP-OES); German
version EN 15991:2025
DIN
DIN EN ISO 5840-3:2025-10
En Vigor
2025-10-01
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve
substitutes implanted by transcatheter techniques (ISO 5840-3:2021 + Amd
1:2025); German version EN ISO 5840-3:2021 + A1:2025 / Note: Applies in
conjunction with DIN EN ISO 5840-1 (2025-10), DIN EN ISO 5840-2 (2025-10).
DIN
DIN EN 60317-67/A1:2025-09
En Vigor
2025-09-01
Specifications for particular types of winding wires - Part 67:
Polyvinyl acetal enamelled rectangular aluminium wire, class 105 (IEC
60317-67:2017/AMD1:2024); German version EN 60317-67:2017/A1:2024 /
Note: Date of issue 2025-08-08*Intended as an amendment to DIN EN
60317-67 (2017-11).
DIN
DIN EN ISO 8102-2:2025-09
En Vigor
2025-09-01
Electrical requirements for lifts, escalators and moving walks - Part 2:
Electromagnetic compatibility with regard to immunity (ISO/DIS
8102-2:2025); German and English version prEN ISO 8102-2:2025 / Note:
Date of issue 2025-07-25*Intended as replacement for DIN EN 12016 (2013-12).
DIN
DIN EN 12369-1:2025-11
En Vigor
2025-11-01
Wood-based panels - Characteristic values for structural design - Part
1: OSB, particleboards and fibreboards; German version EN 12369-1:2025
DIN
DIN EN 13763-17:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
17: Verification of the no-fire current of electric detonators; German
version EN 13763-17:2025
DIN
DIN 16270:2024-04
En Vigor
2025-12-01
PN 250 and PN 400 valves without test connection for pressure gauges /
Note: Date of issue 2024-03-15
DIN
DIN
DIN EN 161:2025-08
En Vigor
2025-08-01
Automatic shut-off valves for gas burners and gas appliances; German
version EN 161:2022+A1:2025 / Note: DIN EN 161 (2024-02) remains valid
alongside this standard until 2028-04-30.
DIN
DIN EN 9247:2025-07
En Vigor
2025-07-01
Aerospace series - Programme management - Verification and validation of
numerical models and simulations; English version prEN 9247:2025 / Note:
Date of issue 2025-06-13
DIN
DIN EN ISO 5667-15:2025-08
En Vigor
2025-08-01
Water quality - Sampling - Part 15: Preservation and handling of samples
of sludge, sediment and suspended matter (ISO/DIS 5667-15:2025); German
and English version prEN ISO 5667-15:2025 / Note: Date of issue
2025-07-04*Intended as replacement for DIN EN ISO 5667-15 (2010-01).
DIN
DIN EN ISO 11816-2:2025-08
En Vigor
2025-08-01
Milk and milk products - Determination of alkaline phosphatase activity
- Part 2: Fluorimetric method for cheese (ISO 11816-2:2024); German
version EN ISO 11816-2:2024
DIN
DIN EN 4012:2006-10
En Vigor
2025-12-01
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting
nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated -
Classification: 1550 MPa (at ambient temperature)/425 °C; German and
English version EN 4012:2004
DIN
DIN EN 13480-5/A1:2025-12
En Vigor
2025-12-01
Metallic industrial piping - Part 5: Inspection and testing; German and
English version EN 13480-5:2024/prA1:2025 / Note: Date of issue
2025-11-07*Intended as an amendment to DIN EN 13480-5 (2024-12).
DIN
DIN EN 1170:2025-09
En Vigor
2025-09-01
Precast concrete products - Test methods for glassfibre reinforced
concrete; German version EN 1170:2024
DIN
DIN EN 17240:2025-07
En Vigor
2025-07-01
Intelligent transport systems - ESafety - ECall end to end conformance
testing for IMS packet switched based systems; German version EN 17240:2024
DIN
DIN EN IEC 61189-2-809:2025-11
En Vigor
2025-11-01
Test methods for electrical materials, circuit boards and other
interconnection structures and assemblies - Part 2-809: X/Y coefficient
of thermal expansion (CTE) test for thick base materials by TMA (IEC
61189-2-809:2024); German version EN IEC 61189-2-809:2025
DIN
DIN EN IEC 61189-3-302:2025-11
En Vigor
2025-11-01
Test methods for electrical materials, printed board and other
interconnection structures and assemblies - Part 3-302: Detection of
plating defects in unpopulated circuit boards by computed tomography
(CT) (IEC 91/1973/CDV:2024); German and English version prEN IEC
61189-3-302:2024 / Note: Date of issue 2025-10-31
DIN
DIN EN 14211:2012-11
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German
version EN 14211:2012
DIN
DIN EN 1999-1-3/NA:2025-10
En Vigor
2025-10-01
National Annex to DIN EN 1999-1-3:2024-11 - Eurocode 9 - Design of
aluminium structures - Part 1-3: Structures susceptible to fatigue /
Note: Applies in conjunction with DIN EN 1999-1-3 (2024-11).
DIN
DIN CEN/TS 18084:2025-12
En Vigor
2025-12-01
Road vehicles - Post Shredder Technology recycling - Design
recommendations for plastic products; German version CEN/TS 18084:2025
DIN
DIN CEN/TR 17608:2025-09
En Vigor
2025-09-01
State of the art on the use of flammable refrigerant alternatives, in
particular from class A3, in refrigeration, air conditioning and heat
pump equipment; German version CEN/TR 17608:2022
DIN
DIN EN 4650:2025-08
En Vigor
2025-08-01
Aerospace series - Wire and cable marking process, UV Laser; German and
English version prEN 4650:2025 / Note: Date of issue 2025-07-04*Intended
as replacement for DIN EN 4650 (2023-06).
DIN
DIN EN ISO 10239:2025-06
En Vigor
2025-06-01
Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2025);
German version EN ISO 10239:2025
DIN
DIN EN 81-41:2025-07
En Vigor
2025-07-01
Safety rules for the construction and installation of lifts - Special
lifts for the transport of persons and goods - Part 41: Vertical lifting
platforms intended for use by persons with impaired mobility; German
version EN 81-41:2024
DIN
DIN EN ISO 19232-3:2025-09
En Vigor
2025-09-01
Non-destructive testing - Image quality of radiographs - Part 3: Minimum
image quality values (ISO 19232-3:2025); German version EN ISO 19232-3:2025
DIN
DIN EN ISO 75-3:2025-11
En Vigor
2025-11-01
Plastics - Determination of temperature of deflection under load - Part
3: High-strength thermosetting laminates and long-fibre-reinforced
plastics (ISO 75-3:2025); German version EN ISO 75-3:2025
DIN
DIN EN ISO 14855-2:2025-11
En Vigor
2025-11-01
Determination of the ultimate aerobic biodegradability of plastic
materials under controlled composting conditions - Method by analysis of
evolved carbon dioxide - Part 2: Gravimetric measurement of carbon
dioxide evolved in a laboratory-scale test (ISO/DIS 14855-2:2025);
German and English version prEN ISO 14855-2:2025 / Note: Date of issue
2025-10-10*Intended as replacement for DIN EN ISO 14855-2 (2018-12).
DIN
DIN EN ISO 23308-6:2024-03
En Vigor
2025-12-01
Energy efficiency of industrial trucks - Test methods - Part 6:
Container straddle carrier (ISO/DIS 23308-6:2024); German and English
version prEN ISO 23308-6:2024 / Note: Date of issue 2024-02-16
DIN
DIN 4753-3:2025-02
En Vigor
2025-12-01
Water heaters, water heating installations and storage water heaters for
drinking water - Part 3: Corrosion protection on the water side by
enamelling and cathodic protection - Requirements and testing
DIN
DIN/TS 69901-4:2025-09
En Vigor
2025-09-01
Project management - Project management systems - Part 4: Data, data model
DIN
DIN EN 12007-5:2025-06
En Vigor
2025-06-01
Gas infrastructure - Pipelines for maximum operating pressure up to and
including 16 bar - Part 5: Service lines - Specific functional
requirements; German version EN 12007-5:2024 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN 13763-11:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
11: Determination of resistance to damage by dropping of detonators and
relays; German and English version prEN 13763-11:2021 / Note: Date of
issue 2021-04-30
DIN
DIN EN 15956:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of phosphorus soluble in mineral
acids; German and English version prEN 15956:2025 / Note: Date of issue
2025-11-07*Intended as replacement for DIN EN 15956 (2011-12).
DIN
DIN 11699:2025-09
En Vigor
2025-09-01
Cosmetics - Analytical methods - Determination of barium, nickel and
other elements in cosmetics and tattoo products by atomic emission
spectrometry with inductively coupled plasma (ICP-OES) after pressure
digestion / Note: Date of issue 2025-07-25*Intended as replacement for
DIN 11699 (2020-10).
DIN
DIN 11853-3:2025-09
En Vigor
2025-09-01
Stainless steel components for hygienic applications in the food
industry - Part 3: Clamp connections
DIN
DIN EN 17860-7:2025-06
En Vigor
2025-06-01
Carrier cycles - Part 7: Cargo trailers; German version EN 17860-7:2024
DIN
DIN EN 1846-3:2025-08
En Vigor
2025-08-01
Firefighting and rescue service vehicles - Part 3: Permanently installed
equipment - Safety and performance; German and English version prEN
1846-3:2025 / Note: Date of issue 2025-07-11*Intended as replacement for
DIN EN 1846-3 (2013-11).
DIN
DIN EN ISO 7979:2025-10
En Vigor
2025-10-01
Leather - Tests for colour fastness - Colour fastness to hydroalcoholic
mixtures (ISO 7979:2025); German version EN ISO 7979:2025
DIN
DIN EN IEC 60384-22:2025-12
En Vigor
2025-12-01
Fixed capacitors for use in electronic equipment - Part 22: Sectional
specification - Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 2 (IEC 60384-22:2024); German version EN IEC
60384-22:2024 / Note: DIN EN IEC 60384-22 (2019-09) remains valid
alongside this standard until 2027-07-26.
DIN
DIN EN IEC 63479-2:2025-12
En Vigor
2025-12-01
Infotainment Services for Public Vehicles (PVIS) - Part 2: Requirements
(IEC 100/4261/CDV:2025); German and English version prEN IEC
63479-2:2025 / Note: Date of issue 2025-11-21
DIN
DIN 18920:2025-09
En Vigor
2025-09-01
Vegetation technology in landscaping - Protection of trees, plantations
and vegetation areas during construction work / Note: Date of issue
2025-08-22*Intended as replacement for DIN 18920 (2014-07).
DIN
DIN EN 4604-010:2025-08
En Vigor
2025-08-01
Aerospace series - Cable, electrical, for signal transmission - Part
010: Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (light WD) -
Product standard; German version ASD-STAN prEN 4604-010:2025 / Note:
Date of issue 2025-06-27*Intended as replacement for DIN EN 4604-010 (2018-10).
DIN
DIN EN 13204:2025-06
En Vigor
2025-06-01
Powered rescue tools for fire and rescue service use - Safety and
performance requirements; German version EN 13204:2025 / Note: DIN
14751-4 (2011-04), DIN 14751-5 (2008-10) and DIN EN 13204 (2016-12)
remain valid alongside this standard until 2025-09-30.
DIN
DIN EN ISO 22477-2/A100:2025-09
En Vigor
2025-09-01
Geotechnical investigation and testing - Testing of geotechnical
structures - Part 2: Testing of piles: static tension load testing (ISO
22477-2:2023); German version EN ISO 22477-2:2023; Amendment A100
DIN
DIN EN ISO 10087/A1:2025-09
En Vigor
2025-09-01
Small craft - Craft identification - Coding system - Amendment 1 (ISO
10087:2022/DAM 1:2025); German and English version EN ISO
10087:2022/prA1:2025 / Note: Date of issue 2025-07-25*Intended as an
amendment to DIN EN ISO 10087 (2022-05).
DIN
DIN 4261-1:2025-12
En Vigor
2025-12-01
Small sewage treatment plants - Part 1: Plants for waste water pretreatment
DIN
DIN EN 13763-18:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
18: Determination of series firing current of electric detonators;
German and English version prEN 13763-18:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 3170:2004-06
En Vigor
2025-12-01
Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN
ISO 3170:2004
DIN
DIN 10371:2025-07
En Vigor
2025-07-01
Analysis of tobacco and tobacco products - Determination of glucose,
fructose and sucrose contents - Method using high performance liquid chromatography
DIN
DIN EN 868-2:2025-09
En Vigor
2025-09-01
Packaging for terminally sterilized medical devices - Part 2:
Sterilization wrap - Requirements and test methods; German version EN 868-2:2025
DIN
DIN EN 3475-404:2025-09
En Vigor
2025-09-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 404: Thermal shock; German and English version EN 3475-404:2025
