Filtrar:
DIN
DIN 22012:1994-01
En Vigor
1994-01-01
Investigations of the raw material in hard-coal-mining;
macropetrographic classification and topographic survey of hard-coal and
host rock
DIN
DIN 6280-12:1996-06
En Vigor
1996-06-01
Generating sets - Uninterruptible power supply - Part 12: Dynamic UPS
systems with and without reciprocating internal combustion engines
DIN
DIN EN IEC 62680-1-7:2024-09
En Vigor
2024-09-01
Universal serial bus interfaces for data and power - Part 1-7: Common
components - USB Audio 3.0 device class definition data formats (IEC
62680-1-7:2019); English version EN IEC 62680-1-7:2019
DIN
DIN 28191:2009-09
En Vigor
2009-09-01
Floating head heat exchanger with flanged floating head - Examples of design
DIN
DIN EN 900:2014-09
En Vigor
2014-09-01
Chemicals used for treatment of water intended for human consumption -
Calcium hypochlorite; German version EN 900:2014
DIN
DIN 54018-2:2023-12
En Vigor
2023-12-01
Non-destructive testing - Eddy current testing for testing of heat
exchanger tubes from the inside - Part 2: Tubes made of
non-ferromagnetic material
DIN
DIN 16868-2:2016-10
En Vigor
2016-10-01
Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part
2: Wound, filled, general quality requirements, testing
DIN
DIN CEN ISO/TS 29843-2:2024-08
En Vigor
2024-08-01
Soil quality - Determination of soil microbial diversity - Part 2:
Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA
extraction method (ISO/TS 29843-2:2021); German version CEN ISO/TS 29843-2:2021
DIN
DIN 20629-1:2001-08
En Vigor
2001-08-01
Suspended monorails for mining - Mounting regulations - Part 1: for
cable-driven suspended monorails
DIN
DIN 14230:2026-02
En Vigor
2026-02-01
Underground water-tanks for fire fighting / Note: Date of issue
2026-01-09*Intended as replacement for DIN 14230 (2021-08).
DIN
DIN
DIN
DIN
DIN EN 60835-1-2:1993-12
En Vigor
1993-12-01
Methods of measurement for equipment used in digital microwave radio
transmission systems; part 1: measurements common to terrestrial
radio-relay systems and satellite earth stations; section 2: basic
characteristics (IEC 60835-1-2:1992); German version EN 60835-1-2:1993
DIN
DIN
DIN
DIN EN 61069-5:2017-03
En Vigor
2017-03-01
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 5:
Assessment of system dependability (IEC 61069-5:2016); German version EN
61069-5:2016 / Note: DIN EN 61069-5 (1995-09) remains valid alongside
this standard until 2019-07-20.
DIN
DIN 40741-1:1999-07
En Vigor
1999-07-01
Lead-acid batteries - Stationary valve regulated batteries with positive
grid plates and immobilized electrolyte for industrial application -
Rated capacities, main dimensions, weights
DIN
DIN 51834-3:2008-12
En Vigor
2008-12-01
Testing of lubricants - Tribological test in the translatory oscillation
apparatus - Part 3: Determination of tribological behaviour of materials
in cooperation with lubricants
DIN
DIN EN 13964:2014-08
En Vigor
2014-08-01
Suspended ceilings - Requirements and test methods; German version EN 13964:2014
DIN
DIN 51082:2003-02
En Vigor
2003-02-01
Testing of ceramic raw materials and ceramic materials - Determination
of pH value of suspensions of non-soluble powders
DIN
DIN EN 60856:1994-01
En Vigor
1994-01-01
Pre-recorded optical reflective videodisk system "Laser
vision" 50 Hz/625 lines; PAL (IEC 60856:1986 + A1:1993); German
version EN 60856:1993 + A1:1993
DIN
DIN 58722-2:2001-10
En Vigor
2001-10-01
Production in optical engineering - Terms relating to production in
optical engineering - Part 2: Equipment
DIN
DIN 13-10:1999-11
En Vigor
1999-11-01
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6
mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN
DIN EN ISO 1452-5:2010-04
En Vigor
2010-04-01
Plastics piping systems for water supply and for buried and above-ground
drainage and sewerage under pressure - Unplasticized poly(vinyl
chloride) (PVC-U) - Part 5: Fitness for purpose of the system (ISO
1452-5:2009); German version EN ISO 1452-5:2009
DIN
DIN 13461:2023-03
En Vigor
2023-03-01
Medical instruments - Needle holder type De Bakey with carbide inserts
DIN
DIN 14800-9:2025-08
En Vigor
2025-08-01
Fire-fighting equipment for fire-fighting and rescue service vehicles -
Part 9: Tool chests for metalworking and woodworking
DIN
DIN EN ISO 9906:2013-03
En Vigor
2013-03-01
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2
and 3 (ISO 9906:2012); German version EN ISO 9906:2012
DIN
DIN 28156:2021-06
En Vigor
2021-06-01
Shaft end for agitators of carbon and stainless steel, for stuffing
boxes - Dimensions
DIN
DIN 27202-7:2026-02
En Vigor
2026-02-01
State of railway vehicles - Superstructure and special equipment of
vehicles - Part 7: Rancher / Note: Date of issue 2026-01-23*Intended as
replacement for DIN 27202-7 (2015-08).
DIN
DIN 4108-3:2024-03
En Vigor
2024-03-01
Thermal protection and energy economy in buildings - Part 3: Protection
against moisture subject to climate conditions - Requirements,
calculation methods and directions for planning and construction
DIN
DIN EN 16603-10-12:2014-09
En Vigor
2014-09-01
Space engineering - Method for the calculation of radiation received and
its effects, and a policy for design margins; English version EN 16603-10-12:2014
DIN
DIN 16766-1:2001-11
En Vigor
2001-11-01
Tools for moulding - Cooling systems for liquid fluids - Part 1:
Connecting nipples and mounting spaces elements on the mould
DIN
DIN 6527:2002-01
En Vigor
2002-01-01
Solid hardmetal end mills with stepped parallel shank - Dimensions
DIN
DIN 86025-3:2010-04
En Vigor
2010-04-01
Pipe clamps for shipboard use - Fastening clamps with bracket - Part 3: Inserts
DIN
DIN EN ISO 14414:2019-09
En Vigor
2019-09-01
Pump system energy assessment (ISO/ASME 14414:2019); German version EN
ISO 14414:2019
DIN
DIN EN 526:1993-11
En Vigor
1993-11-01
Inland navigation vessels; gangways with a length not exceeding 8 m;
requirements, types; German version EN 526:1993
DIN
DIN
DIN 2250-1:2008-10
En Vigor
2008-10-01
Geometrical product specifications (GPS) - GO ring gauges and setting
ring gauges - Part 1: From 1 mm up to 315 mm nominal diameter
DIN
DIN 65552:1993-12
En Vigor
1993-12-01
Aerospace; blind rivets with 100° countersunk head, corrosion-resisting
steel, with mandrel, metric series
