Filtrar:
DIN
DIN EN IEC 62769-150-1:2022-11
En Vigor
2022-11-01
Field device integration (FDI) - Part 150-1: Profiles - ISA100 WIRELESS
(IEC 62769-150-1:2021); English version EN IEC 62769-150-1:2021
DIN
DIN EN 4854-3:2020-07
En Vigor
2020-07-01
Aerospace series - Bearing, spherical plain, in corrosion resisting
steel with self-lubricating liner, low starting torque and low friction
coefficient, elevated duty cycles under low oscillations at different
operating conditions - Part 3: Technical specification; German and
English version EN 4854-3:2019
DIN
DIN CEN/TS 14966:2005-08
En Vigor
2005-08-01
Wood-based panels - Small scale indicative test methods for certain
mechanical properties; German version CEN/TS 14966:2005
DIN
DIN EN 303-2:2023-04
En Vigor
2023-04-01
Heating boilers - Part 2: Heating boilers with forced draught burners -
Special requirements for boilers with atomizing oil burners; German and
English version prEN 303-2:2023 / Note: Date of issue
2023-03-03*Intended as replacement for DIN EN 303-2 (2017-11).
DIN
DIN EN IEC 62832-3:2022-05
En Vigor
2022-05-01
Industrial-process measurement, control and automation - Digital factory
framework - Part 3: Application of Digital Factory for life cycle
management of production systems (IEC 62832-3:2020); English version EN
IEC 62832-3:2020
DIN
DIN EN IEC 61189-5-502:2022-05
En Vigor
2022-05-01
Test methods for electrical materials, printed board and other
interconnection structures and assemblies - Part 5-502: General test
methods for materials and assemblies - Surface insulation resistance
(SIR) testing of assemblies (IEC 61189-5-502:2021); German version EN
IEC 61189-5-502:2021
DIN
DIN EN ISO 4022:2018-12
En Vigor
2018-12-01
Permeable sintered metal materials - Determination of fluid permeability
(ISO 4022:2018); German version EN ISO 4022:2018
DIN
DIN EN 14404-5:2024-10
En Vigor
2024-10-01
Personal protective equipment - Knee protectors for work in the kneeling
position - Part 5: Requirements for knee mats (type 3); German version
EN 14404-5:2024
DIN
DIN EN 12586:2025-06
En Vigor
2025-06-01
Child care articles - Soother holder - Safety requirements and test
methods; German version EN 12586:2025
DIN
DIN EN ISO 22088-6:2009-10
En Vigor
2009-10-01
Plastics - Determination of resistance to environmental stress cracking
(ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006); German
version EN ISO 22088-6:2009
DIN
DIN EN 17038-3:2025-04
En Vigor
2025-04-01
Pumps - Methods of qualification of the Energy Efficiency Index for
rotordynamic pump units - Part 3: Testing and calculation of energy
efficiency index (EEI) of booster sets; German and English version prEN
17038-3:2024 / Note: Date of issue 2025-03-14
DIN
DIN EN 15734-1:2022-04
En Vigor
2022-04-01
Railway applications - Braking systems of high speed trains - Part 1:
Requirements and definitions; German version EN 15734-1:2010+A1:2021
DIN
DIN EN ISO 664:2008-11
En Vigor
2008-11-01
Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008);
German version EN ISO 664:2008
DIN
DIN EN 1995-3:2023-09
En Vigor
2023-09-01
Eurocode 5: Design of timber structures - Part 3: Execution; German and
English version prEN 1995-3:2023 / Note: Date of issue 2023-08-11
DIN
DIN EN 528:2023-02
En Vigor
2023-02-01
Rail dependent storage and retrieval equipment - Safety requirements for
S/R machines; German version EN 528:2021+A1:2022
DIN
DIN EN 16589-2:2025-05
En Vigor
2025-05-01
Laboratory local exhaust devices - Articulated extraction arms - Part 2:
Commissioning and on-site testing; German and English version prEN
16589-2:2025 / Note: Date of issue 2025-03-28
DIN
DIN EN 301489-3:2023-05
En Vigor
2023-05-01
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services - Part 3: Specific conditions for Short Range Devices (SRD)
operating on frequencies between 9 kHz and 246 GHz - Harmonised Standard
for ElectroMagnetic Compatibility (Endorsement of the English version EN
301 489-3 V2.3.2 (2023-01) as a German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN EN 13445-14:2025-01
En Vigor
2025-01-01
Unfired pressure vessels - Part 14: Additional requirements for pressure
equipment and pressure components fabricated with additive manufacturing
methods; German and English version prEN 13445-14:2024 / Note: Date of
issue 2024-11-29*Intended as replacement for DIN/TS 17026 (2020-10).
DIN
DIN EN 319401:2026-04
En Vigor
2026-04-01
Electronic Signatures and Trust Infrastructures (ESI) - General Policy
Requirements for Trust Service Providers (Endorsement of the English
version EN 319 401 V3.1.1 (2024-06) as a German standard) / Note: DIN
ETS standards collection*Endorsement notice
DIN
DIN EN 302065-3-1:2026-04
En Vigor
2026-04-01
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) -
Harmonised standard for access to radio spectrum - Part 3: UWB devices
installed in motor and railway vehicles - Sub-part 1: Requirements for
UWB devices for vehicular access systems within 3,8 GHz to 4,2 GHz or 6
GHz to 8,5 GHz (Endorsement of the English version EN 302 065-3-1 V3.2.1
(2025-02) as a German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN ISO 9360-1:2009-09
En Vigor
2009-09-01
Anaesthetic and respiratory equipment - Heat and moisture exchangers
(HMEs) for humidifying respired gases in humans - Part 1: HMEs for use
with minimum tidal volumes of 250 ml (ISO 9360-1:2000); German version
EN ISO 9360-1:2009 / Note: DIN EN ISO 9360-1 (2000-04) remains valid
alongside this standard until 2010-03-21.
DIN
DIN EN ISO 10748:2011-06
En Vigor
2011-06-01
Footwear - Test method for slide fasteners - Slider locking strength
(ISO 10748:2011); German version EN ISO 10748:2011
DIN
DIN
DIN EN 61937-10:2011-11
En Vigor
2011-11-01
Digital audio - Interface for non-linear PCM encoded audio bitstreams
applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the
MPEG-4 Audio Lossless Coding (ALS) format (IEC 61937-10:2011); German
version EN 61937-10:2011
DIN
DIN EN 534:2010-07
En Vigor
2010-07-01
Corrugated bitumen sheets - Product specification and test methods;
German version EN 534:2006+A1:2010 / Note: To be replaced by DIN EN 534 (2020-05).
DIN
DIN EN ISO 19137:2008-09
En Vigor
2008-09-01
Geographic information - Core profile of the spatial schema (ISO
19137:2007); English version EN ISO 19137:2008
DIN
DIN EN ISO 21084:2019-06
En Vigor
2019-06-01
Textiles - Method for determination of alkylphenols (AP) (ISO
21084:2019); German version EN ISO 21084:2019 / Note: To be replaced by
DIN EN ISO 21084 (2026-03).
DIN
DIN EN 12810-2:2004-03
En Vigor
2004-03-01
Facade scaffolds made of prefabricated components - Part 2: Particular
methods of structural design; German version EN 12810-2:2003
DIN
DIN EN ISO 16638-1:2020-07
En Vigor
2020-07-01
Radiological protection - Monitoring and internal dosimetry for specific
materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015);
German version EN ISO 16638-1:2017
DIN
DIN 60900-6:1990-11
En Vigor
1990-11-01
Yarns; spun yarns; systems of concepts according to spinning processes
DIN
DIN EN ISO 225:2011-02
En Vigor
2011-02-01
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of
dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010
DIN
DIN 15453:1978-06
En Vigor
1978-06-01
Cranes; cardan shafts, directives for installation, maintainance,
handling and storage
DIN
DIN EN ISO 16017-1:2001-10
En Vigor
2001-10-01
Indoor, ambient and workplace air - Sampling and analysis of volatile
organic compounds by sorbent tube/thermal desorption/capillary gas
chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German
version EN ISO 16017-1:2000
DIN
DIN EN ISO 16000-15:2009-04
En Vigor
2009-04-01
Indoor air - Part 15: Sampling strategy for nitrogen dioxide
(NO<(Index)2>) (ISO 16000-15:2008); German version EN ISO 16000-15:2008
DIN
DIN 69890-1:1990-08
En Vigor
1990-08-01
Modular cutting tool systems; protruding lengths of adapter modules;
adapter modules for spindle noses with 7/24 taper according to DIN 2079
DIN
DIN 58737-1:1997-09
En Vigor
1997-09-01
Production in optical engineering - Spindles - Part 1: Spindles with
fitting thread; inactive for new design
DIN
DIN EN ISO 22892:2011-09
En Vigor
2011-09-01
Soil quality - Guidelines for the identification of target compounds by
gas chromatography and mass spectrometry (ISO 22892:2006); German
version EN ISO 22892:2011
DIN
DIN 53380-3:1998-07
En Vigor
1998-07-01
Testing of plastics - Determination of gas transmission rate - Part 3:
Oxygen-specific carrier gas method for testing of plastic films and
plastics mouldings
DIN
DIN EN ISO 10438-2:2010-08
En Vigor
2010-08-01
Petroleum, petrochemical and natural gas industries - Lubrication,
shaft-sealing and control-oil systems and auxiliaries - Part 2:
Special-purpose oil systems (ISO 10438-2:2007); English version EN ISO
10438-2:2007, with CD-ROM
DIN
DIN 85005-34:1999-01
En Vigor
1999-01-01
Ships and marine technology - Graphical symbols for technical
documentation - Part 34: Control indicators for ships propulsion plants
