Filtrar:
DIN
DIN 65267:2020-10
En Vigor
2020-10-01
Aerospace series - Screws, hexagon, with MJ thread, threaded
approximately to head, steel, nominal tensile strength 900 MPa, for
temperatures up to 235 °C; Text in German and English
DIN
DIN EN ISO 16610-1:2015-11
En Vigor
2015-11-01
Geometrical product specifications (GPS) - Filtration - Part 1: Overview
and basic concepts (ISO 16610-1:2015); German version EN ISO 16610-1:2015
DIN
DIN 27202-6:2015-08
En Vigor
2015-08-01
State of railway vehicles - Superstructure and special equipment of
vehicles - Part 6: Safety equipment for load and transport protection /
Note: DIN 27202-6 (2004-05) remains valid alongside this standard until
2016-01-31.*To be replaced by DIN 27202-6 (2026-02).
DIN
DIN EN ISO 7010/A1:2020-12
En Vigor
2020-12-01
Graphical symbols - Safety colours and safety signs - Registered safety
signs - Amendment 1 (ISO 7010:2019/Amd 1:2020); German version EN ISO 7010:2020/A1:2020
DIN
DIN
DIN 6597:2013-09
En Vigor
2013-09-01
Tool holders for external and internal turning with hollow taper shank
for indexable inserts - Designation
DIN
DIN
DIN
DIN 16894:2011-04
En Vigor
2011-04-01
Pipes of crosslinked medium density polyethylene (PE-MDX) - General
quality requirements and testing
DIN
DIN 1463-2:1993-10
En Vigor
1993-10-01
Guidelines for the establishment and development of thesauri;
multilingual thesauri
DIN
DIN
DIN 50916-1:2023-07
En Vigor
2023-07-01
Testing of copper alloys - Stress corrosion cracking test in ammonia -
Part 1: Testing of tubes, rods and profiles
DIN
DIN
DIN 58933-1:1995-01
En Vigor
1995-01-01
Haematology - Procedure for determining the volume fraction of
erythrocytes (packed cell volume) in blood - Part 1: Reference method
based on centrifugation
DIN
DIN EN 12662-1:2024-08
En Vigor
2024-08-01
Liquid petroleum products - Determination of total contamination - Part
1: Middle distillates and diesel fuels; German version EN 12662-1:2024
DIN
DIN 32645:2008-11
En Vigor
2008-11-01
Chemical analysis - Decision limit, detection limit and determination
limit under repeatability conditions - Terms, methods, evaluation
DIN
DIN 65159:1993-12
En Vigor
1993-12-01
Aerospace; blind rivets of aluminium alloy with 100° countersunk head
and self-locking device
DIN
DIN 30670-2:2024-01
En Vigor
2024-01-01
Polyethylen coatings of steel pipes and fittings - Part 2: Requirements
and testings of factory-applied sintered or flame sprayed coatings /
Note: This standard is part of the DVGW body of rules.
DIN
DIN 51084:2008-11
En Vigor
2008-11-01
Testing of oxidic raw and basic materials for ceramic, glass and glazes
- Determination of fluoride content
DIN
DIN 58795:2010-02
En Vigor
2010-02-01
Medical instruments - Mouth gags - Dimensions for slide bars and tongue depressors
DIN
DIN EN 14620-1:2024-09
En Vigor
2024-09-01
Design and manufacture of site built, vertical, cylindrical,
flat-bottomed tank systems for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and -196 °C - Part 1:
General; German version EN 14620-1:2024
DIN
DIN 8141-2:1993-07
En Vigor
1993-07-01
ISO-metric screw threads; coarse pitch threads and fine pitch threads
for interference fits in aluminium cast alloys; nominal diameter from 5
mm to 16 mm; gauges for internal and external threads
DIN
DIN 80150:2026-02
En Vigor
2026-02-01
Ships and marine technology - Mounting rail systems for supporting
shipbuilding components - Requirements / Note: Date of issue 2026-01-09
DIN
DIN 30678-1:2024-01
En Vigor
2024-01-01
Polypropylen coatings of steel pipes and fittings - Part 1: Requirements
and testings of factory-applied extruded coatings / Note: This standard
is part of the DVGW body of rules.
DIN
DIN 45643:2011-02
En Vigor
2011-02-01
Measurement and assessment of aircraft sound; Text in German and English
DIN
DIN
DIN EN 12665:2024-10
En Vigor
2024-10-01
Light and lighting - Basic terms and criteria for specifying lighting
requirements; German version EN 12665:2024
DIN
DIN 30665-1:2021-06
En Vigor
2021-06-01
Gas-appliances - Gas burners for laboratory use (laboratory burners) -
Part 1: Safety requirements and tests / Note: This standard is part of
the DVGW body of rules.*DIN 30665-1 (1982-03) remains valid alongside
this standard until 2021-11-30.
DIN
DIN 55967:2000-11
En Vigor
2000-11-01
Raw materials for paints and varnishes - Glycerine - Requirements and
methods of test
DIN
DIN EN 15877-1:2024-09
En Vigor
2024-09-01
Railway applications - Markings of railway vehicles - Part 1: Freight
wagons; German version EN 15877-1:2024
DIN
DIN 86254:2021-07
En Vigor
2021-07-01
Ships and marine technology - Shut off valves extra light duty, DN 32 to
DN 125, PN 10
DIN
DIN
DIN 77005-2:2023-12
En Vigor
2023-12-01
Lifecycle record of technical objects - Part 2: Digital Lifecycle record
DIN
DIN 18551:2026-05
En Vigor
2026-05-01
Sprayed concrete - National application rules for series DIN EN 14487
and rules for design of sprayed concrete constructions / Note: Date of
issue 2026-04-10*Intended as replacement for DIN 18551 (2014-08).
DIN
DIN EN 16186-8:2025-01
En Vigor
2025-01-01
Railway applications - Driver's cab - Part 8: Tram vehicle layout and
access; German version EN 16186-8:2022+A1:2024
DIN
DIN 11868-1:2023-11
En Vigor
2023-11-01
Sampling equipments on milk collecting tankers - Part 1: Requirements,
verification and subsequent verification
DIN
DIN
DIN EN 18007-1:2024-09
En Vigor
2024-09-01
Electromagnetic pulse welding - Part 1: Welding knowledge, terminology
and vocabulary; German version EN 18007-1:2024
DIN
DIN
DIN 15159-2:2022-10
En Vigor
2022-10-01
Transportation chain for trade products - Specific pallet made from
thermoplastic resin - Part 2: Requirements and testing
