Filtrar:
DIN
DIN EN IEC 60352-7:2025-09
En Vigor
2025-09-01
Solderless connections - Part 7: Spring clamp connections - General
requirements, test methods and practical guidance (IEC
48B/3108/CDV:2024); German and English version prEN IEC 60352-7:2024 /
Note: Date of issue 2025-08-01*Intended as replacement for DIN EN IEC
60352-7 (2023-12).
DIN
DIN EN ISO 14096-1:2025-09
En Vigor
2025-09-01
Non-destructive testing - Qualification of radiographic film
digitisation systems - Part 1: Definitions, quantitative measurements of
image quality parameters, standard reference film and qualitative
control (ISO/DIS 14096-1:2025); German and English version prEN ISO
14096-1:2025 / Note: Date of issue 2025-08-15*Intended as replacement
for DIN EN ISO 14096-1 (2020-10).
DIN
DIN EN 13763-19:2004-03
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 19:
Determination of firing impulse of electric detonators; German version
EN 13763-19:2003
DIN
DIN EN ISO 9556:2002-04
En Vigor
2025-12-01
Steel and iron - Determination of total carbon content - Infrared
absorption method after combustion in an induction furnace (ISO
9556:1989); German version EN ISO 9556:2001
DIN
DIN EN ISO 4935:2025-12
En Vigor
2025-12-01
Steel and iron - Determination of sulfur content - Infrared absorption
method after combustion in an induction furnace (ISO/DIS 4935:2025);
German and English version prEN ISO 4935:2025 / Note: Date of issue
2025-11-14*Intended as replacement for DIN EN 24935 (1992-07).
DIN
DIN EN 2267-002:2025-11
En Vigor
2025-11-01
Aerospace series - Cables, electrical, for general purpose - Operating
temperatures between -55 °C and 260 °C - Part 002: General; German and
English version EN 2267-002:2025
DIN
DIN EN 14624:2025-11
En Vigor
2025-11-01
Performance of portable locating leak detectors and of fixed gas
detectors for all refrigerants; German and English version prEN
14624:2025 / Note: Date of issue 2025-10-10*Intended as replacement for
DIN EN 14624 (2020-08).
DIN
DIN EN 15685:2025-12
En Vigor
2025-12-01
Building hardware - Requirements and test methods - Multipoint locks,
latches and locking plates - Characteristics and test methods; German
version EN 15685:2024
DIN
DIN EN 15843:2024-09
En Vigor
2025-12-01
Water quality - Guidance standard on determining the degree of
modification of river hydromorphology; German and English version prEN
15843:2024 / Note: Date of issue 2024-08-02
DIN
DIN EN 1999-1-1/NA:2025-10
En Vigor
2025-10-01
National Annex to DIN EN 1999-1-1:2024-11 - Eurocode 9 - Design of
aluminium structures - Part 1-1: General rules / Note: Applies in
conjunction with DIN EN 1999-1-1 (2024-11).
DIN
DIN EN 1918-1:2025-07
En Vigor
2025-07-01
Gas infrastructure - Underground gas storage - Part 1: Functional
recommendations for storage in aquifers; German and English version prEN
1918-1:2025 / Note: Date of issue 2025-06-20*Intended as replacement for
DIN EN 1918-1 (2016-11).
DIN
DIN EN ISO 23695:2025-08
En Vigor
2026-06-01
Water quality - Determination of ammonium nitrogen in water -
Small-scale sealed tube method (ISO 23695:2023); German and English
version prEN ISO 23695:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN 300132-2:2025-11
En Vigor
2025-11-01
Environmental Engineering (EE) - Power supply interface at the input of
Information and Communication Technology (ICT) equipment - Part 2:-48 V
Direct Current (DC) (Endorsement of the English version EN 300 132-2
V2.8.1 (2024-10) as a German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN ISO 23345:2025-11
En Vigor
2026-06-01
Jewellery and precious metals - Non-destructive precious metal fineness
confirmation by ED-XRF (ISO 23345:2021); German and English version prEN
ISO 23345:2025 / Note: Date of issue 2025-10-24
DIN
DIN EN 12944-3:2025-11
En Vigor
2025-11-01
Fertilizers, liming materials and inhibitors - Vocabulary - Part 3:
Terms relating to liming materials; German version EN 12944-3:2025
DIN
DIN EN 16586-2:2025-11
En Vigor
2025-11-01
Railway applications - Design for PRM use - Accessibility of persons
with reduced mobility to rolling stock - Part 2: Boarding aids; German
version EN 16586-2:2025
DIN
DIN EN 18205:2025-07
En Vigor
2025-07-01
Qualification of welding procedures for plastic materials; German and
English version prEN 18205:2025 / Note: Date of issue 2025-05-30
DIN
DIN EN ISO 16811:2025-06
En Vigor
2025-06-01
Non-destructive testing - Ultrasonic testing - Sensitivity and range
setting (ISO 16811:2025); German version EN ISO 16811:2025
DIN
DIN EN 17968:2025-07
En Vigor
2025-07-01
Rough-terrain variable-reach tractors - Safety requirements and
verification for permanently mounted equipment; German and English
version prEN 17968:2025 / Note: Date of issue 2025-05-30*Intended as
replacement for DIN CEN/TS 1459-8 (2019-03).
DIN
DIN 3764-3:2024-12
En Vigor
2024-12-01
Compression seals made of elastomer for sealing or covering joints in
concrete and masonry - Part 3: Factory production control
DIN
DIN EN IEC 61753-021-03:2025-11
En Vigor
2025-11-01
Fibre optic interconnecting devices and passive components - Performance
standard - Part 021-03: Single-mode fibre optic connectors terminated as
pigtails and patchcords for category OP - Outdoor protected environment
(IEC 86B/5006/CDV:2025); German and English version prEN IEC
61753-021-03:2025 / Note: Date of issue 2025-10-17*Intended as
replacement for DIN EN 61753-021-3 (2013-10).
DIN
DIN EN 13763-9:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 9:
Determination of resistance to bending of detonators; German version EN 13763-9:2003
DIN
DIN EN 17752:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Determination of specific inhibiting compounds;
German and English version prEN 17752:2026 / Note: Date of issue
2025-11-21*Intended as replacement for DIN CEN/TS 17752 (2022-07).
DIN
DIN EN ISO 23308-2:2025-11
En Vigor
2025-11-01
Energy efficiency of industrial trucks - Test methods - Part 2:
Operator-controlled self-propelled trucks, burden and personnel carriers
and towing tractors (ISO 23308-2:2025); German version EN ISO 23308-2:2025
DIN
DIN EN IEC 62343-1:2025-07
En Vigor
2025-07-01
Dynamic modules - Part 1: Performance standards - General conditions
(IEC 62343-1:2019 + AMD1:2023); German version EN IEC 62343-1:2019 +
A1:2024 / Note: DIN EN IEC 62343-1 (2020-02) remains valid alongside
this standard until 2027-01-18.
DIN
DIN EN 3475-805:2025-07
En Vigor
2025-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 805: Characteristic impedance; German and English version prEN
3475-805:2025 / Note: Date of issue 2025-06-13*Intended as replacement
for DIN EN 3475-805 (2002-12).
DIN
DIN EN 15698-2:2025-07
En Vigor
2025-07-01
District heating pipes - Bonded twin pipe systems for directly buried
hot water networks - Part 2: Factory made fitting and valve assemblies
of steel service pipes, polyurethane thermal insulation and one casing
of polyethylene; German version EN 15698-2:2025
DIN
DIN ISO 37001:2025-09
En Vigor
2026-06-01
Anti-bribery management systems - Requirements with guidance for use
(ISO 37001:2025); Text in German and English / Note: Date of issue 2025-08-15
DIN
DIN EN ISO 787-5:2025-09
En Vigor
2025-09-01
General methods of test for pigments and extenders - Part 5:
Determination of oil absorption value (ISO/DIS 787-5:2025); German and
English version prEN ISO 787-5:2025 / Note: Date of issue
2025-08-22*Intended as replacement for DIN EN ISO 787-5 (1995-10).
DIN
DIN EN 2002-002:2025-11
En Vigor
2026-06-01
Aerospace series - Metallic materials - Test methods - Part 002: Tensile
testing at elevated temperature; German version ASD-STAN prEN
2002-002:2025 / Note: Date of issue 2025-09-26
DIN
DIN EN 17990:2025-12
En Vigor
2025-12-01
Thermal insulation and energy economy in buildings - Method to determine
the durability of bondings with adhesive tapes and adhesive masses for
the establishment of airtight layers under climatic conditions
representative for indoor environments; German version EN 17990:2025
DIN
DIN EN ISO 14644-13:2025-12
En Vigor
2025-12-01
Cleanrooms and associated controlled environments - Part 13: Cleaning of
surfaces to achieve defined levels of cleanliness in terms of particle
and chemical concentration (ISO/FDIS 14644-13:2025); German and English
version prEN ISO 14644-13:2025 / Note: Date of issue 2025-11-21*Intended
as replacement for DIN EN ISO 14644-13 (2017-11).
DIN
DIN
DIN EN 14363-1:2025-07
En Vigor
2025-07-01
Railway applications - Testing and simulation for the assessment of
running characteristics of rail vehicles operated on the heavy rail
network - Part 1: General; German and English version prEN 14363-1:2025
/ Note: Date of issue 2025-05-30*Intended as replacement for DIN EN
14363 (2022-10).
DIN
DIN EN 6050:2025-07
En Vigor
2025-07-01
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk
reduced head, shear type, in aluminium alloy 7050, conversion coating -
Inch series; German version ASD-STAN prEN 6050:2025 / Note: Date of
issue 2025-05-30
DIN
DIN EN ISO 23696-1:2025-08
En Vigor
2026-06-01
Water quality - Determination of nitrate in water using small-scale
sealed tubes - Part 1: Dimethylphenol colour reaction (ISO
23696-1:2023); German and English version prEN ISO 23696-1:2025 / Note:
Date of issue 2025-07-11
DIN
DIN EN 415-8:2025-08
En Vigor
2025-08-01
Safety of packaging machines - Part 8: Strapping machines; German
version EN 415-8:2025
DIN
DIN EN 13763-15:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
15: Determination of equivalent initiating capability; German and
English version prEN 13763-15:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN 15330-4/A100:2025-06
En Vigor
2025-12-01
Surfaces for sports areas - Synthetic turf and needle-punched surfaces
primarily designed for outdoor use - Part 4: Specification for shockpads
used with synthetic turf, needle-punch and textile sports surfaces;
German version EN 15330-4:2022; Amendment A100 / Note: Date of issue 2025-05-16
DIN
DIN 3975-1:2024-12
En Vigor
2025-12-01
Definitions and parameters on cylindrical worm gear pairs with
rectangular crossing shaft - Part 1: Worm and worm wheel / Note: Date of
issue 2024-11-15










