Filtrar:
DIN
DIN 6858-201:2024-05
En Vigor
2025-12-01
Calibration and Quantification of the SPECT/CT - Part 201: Calibration
of the SPECT/CT for Lu-177 / Note: Date of issue 2024-03-29
DIN
DIN 19596-2:2025-07
En Vigor
2025-07-01
Manhole tops without vents, classes A 15 and B 125, circular - Part 2: Frames
DIN
DIN EN ISO 15708-4:2025-09
En Vigor
2025-09-01
Non-destructive testing - Radiation methods for computed tomography -
Part 4: Qualification (ISO 15708-4:2025); German version EN ISO 15708-4:2025
DIN
DIN EN ISO 23697-2:2025-08
En Vigor
2026-06-01
Water quality - Determination of total bound nitrogen
(ST-TN<(Index)b>) in water using small-scale sealed tubes - Part
2: Chromotropic acid colour reaction (ISO 23697-2:2023); German and
English version prEN ISO 23697-2:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN 13654-2:2025-11
En Vigor
2025-11-01
Soil improvers and growing media - Determination of nitrogen - Part 2:
Dumas method; German and English version prEN 13654-2:2025 / Note: Date
of issue 2025-09-26*Intended as replacement for DIN EN 13654-2 (2002-01).
DIN
DIN EN 13763-13:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
13: Verification of the resistance to electrostatic discharge (ESD) of
electric and electronic detonators; German version EN 13763-13:2025
DIN
DIN EN 15383:2025-12
En Vigor
2025-12-01
Plastics piping systems for drainage and sewerage - Glass-reinforced
thermosetting plastics (GRP) based on polyester resin (UP) - Manholes
and inspection chambers; German and English version prEN 15383:2025 /
Note: Date of issue 2025-11-07*Intended as replacement for DIN EN 15383 (2014-02).
DIN
DIN
DIN EN 6049-007:2025-07
En Vigor
2025-07-01
Aerospace series - Electrical cables, installation - Protection sleeve
in meta-aramid fibres - Part 007: Self-wrapping mechanical and
electrical protective sleeve, flexible post installation operating
temperature from -55 °C to 260 °C - Product standard; German and English
version prEN 6049-007:2025 / Note: Date of issue 2025-06-06*Intended as
replacement for DIN EN 6049-007 (2012-06).
DIN
DIN EN 12098-3:2025-07
En Vigor
2025-07-01
Energy performance of buildings - Controls for heating systems - Part 3:
Control equipment for electrical heating systems - Modules M3-5, 6, 7,
8; German version EN 12098-3:2022
DIN
DIN EN ISO 10328:2025-08
En Vigor
2025-08-01
Prosthetics - Structural testing of lower-limb prostheses - Requirements
and test methods (ISO/DIS 10328:2025); German and English version prEN
ISO 10328:2025 / Note: Date of issue 2025-07-04*Intended as replacement
for DIN EN ISO 10328 (2016-12).
DIN
DIN ISO 21951:2025-11
En Vigor
2025-11-01
Coated abrasives - Plain discs with holes for dust extraction (ISO
21951:2024); Text in German and English / Note: Date of issue
2025-10-10*Intended as replacement for DIN ISO 21951 (2001-11).
DIN
DIN EN IEC 61755-3-2:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces - Part 3-2: Connector parameters of dispersion
unshifted single-mode physically contacting fibres - Angled 2,5 mm and
1,25 mm diameter cylindrical full zirconia ferrules (IEC
61755-3-2:2024); German version EN IEC 61755-3-2:2024
DIN
DIN EN ISO 15118-21:2025-12
En Vigor
2025-12-01
Road vehicles - Vehicle to grid communication interface - Part 21:
Common 2nd generation network layer and application layer requirements
conformance test plan (ISO 15118-21:2025); English version EN ISO 15118-21:2025
DIN
DIN EN 303851:2025-11
En Vigor
2025-11-01
Radio Frequency Identification - Equipment operating in the band 2 446
MHz to 2 454 MHz with power levels up to a maximum of 500 mW e.i.r.p.
and up to a maximum of 4 W e.i.r.p. - Harmonised Standard for access to
radio spectrum (Endorsement of the English version EN 303 851 V1.1.1
(2025-04) as a German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 17640/A1:2025-11
En Vigor
2025-11-01
Fixed-time cybersecurity evaluation methodology for ICT products; German
and English version EN 17640:2022/prA1:2025 / Note: Date of issue
2025-10-10*Intended as an amendment to DIN EN 17640 (2022-12).
DIN
DIN EN ISO/IEEE 11073-10701:2025-12
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10701: Point-of-care
medical device communication - Metric provisioning by participants in a
Service-oriented Device Connectivity (SDC) system (ISO/IEEE
11073-10701:2024); English version EN ISO/IEEE 11073-10701:2025
DIN
DIN EN ISO 4064-5:2025-12
En Vigor
2025-12-01
Water meters for cold potable water and hot water - Part 5: Installation
requirements (ISO 4064-5:2025); German version EN ISO 4064-5:2025 /
Note: This standard is part of the DVGW body of rules.
DIN
DIN EN 15342:2025-11
En Vigor
2025-11-01
Plastics - Recycled plastics - Characterization of polystyrene (PS)
recyclates; German version EN 15342:2025
DIN
DIN EN 16211:2025-08
En Vigor
2025-08-01
Ventilation for buildings - Measurement of air flow rates on site -
Methods; German version EN 16211:2024
DIN
DIN EN 868-6:2025-09
En Vigor
2025-09-01
Packaging for terminally sterilized medical devices - Part 6: Paper for
low temperature sterilization processes - Requirements and test methods;
German version EN 868-6:2025
DIN
DIN EN ISO/IEC 29151:2025-07
En Vigor
2025-07-01
Information security, cybersecurity and privacy protection - Controls
and guidance for personally identifiable information protection (ISO/IEC
DIS 29151:2025); German and English version prEN ISO/IEC 29151:2025 /
Note: Date of issue 2025-06-06*Intended as replacement for DIN EN
ISO/IEC 29151 (2022-07).
DIN
DIN EN ISO 21611:2025-08
En Vigor
2025-08-01
Dentistry - Vocabulary for Source Conclusion for Human Identification by
Dental Evidence (ISO/DIS 21611:2025); German and English version prEN
ISO 21611:2025 / Note: Date of issue 2025-07-18
DIN
DIN EN ISO/IEC 19788-2:2025-09
En Vigor
2025-09-01
Information technology for learning, education and training - Metadata
for learning resources - Part 2: Dublin Core elements (ISO/IEC DIS
19788-2:2025); German and English version prEN ISO/IEC 19788-2:2025 /
Note: Date of issue 2025-08-01*Intended as replacement for DIN EN
ISO/IEC 19788-2 (2013-03).
DIN
DIN EN ISO 16408:2025-09
En Vigor
2025-09-01
Dentistry - Oral care products - Oral rinses (ISO 16408:2025); German
version EN ISO 16408:2025
DIN
DIN EN 18268:2025-11
En Vigor
2025-11-01
Chemicals used for treatment of water intended for human consumption -
Antiscalants for membranes - Citric Acid; German and English version
prEN 18268:2025 / Note: Date of issue 2025-10-10
DIN
DIN EN 13857-1:2003-10
En Vigor
2025-12-01
Explosives for civil uses - Part 1: Terminology; German version EN 13857-1:2003
DIN
DIN EN ISO 23308-1:2025-11
En Vigor
2025-11-01
Energy efficiency of industrial trucks - Test methods - Part 1: General
(ISO 23308-1:2025); German version EN ISO 23308-1:2025
DIN
DIN EN 14476:2025-11
En Vigor
2025-11-01
Chemical disinfectants and antiseptics - Quantitative suspension test
for the evaluation of virucidal activity in the medical area - Test
method and requirements (Phase 2/Step 1); German version EN 14476:2025
DIN
DIN EN ISO 8611-2:2025-06
En Vigor
2025-06-01
Pallets for materials handling - Flat pallets - Part 2: Performance
requirements and selection of tests (ISO 8611-2:2025); German version EN
ISO 8611-2:2025
DIN
DIN ISO 30401/A2:2025-08
En Vigor
2025-08-01
Knowledge management systems - Requirements - Amendment 2: Climate
action changes (ISO 30401:2018/Amd.2:2024)
DIN
DIN EN ISO 10642:2025-09
En Vigor
2026-06-01
Fasteners - Hexagon socket countersunk head screws with reduced
loadability (ISO/DIS 10642:2025); German and English version prEN ISO
10642:2025 / Note: Date of issue 2025-07-25
DIN
DIN EN ISO 17523:2025-11
En Vigor
2025-11-01
Health informatics - Requirements for electronic prescriptions (ISO
17523:2025); English version EN ISO 17523:2025
DIN
DIN EN 13763-11:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 11:
Determination of resistance to damage by dropping of detonators and
relays; German version EN 13763-11:2003
DIN
DIN EN ISO 7199:2024-12
En Vigor
2025-12-01
Cardiovascular implants and artificial organs - Blood-gas exchangers
(oxygenators) (ISO 7199:2024); German version EN ISO 7199:2024
DIN
DIN EN ISO 15630-3:2025-11
En Vigor
2025-11-01
Steel for the reinforcement and prestressing of concrete - Test methods
- Part 3: Prestressing steel (ISO 15630-3:2025); German version EN ISO 15630-3:2025
DIN
DIN EN 1366-3:2025-08
En Vigor
2025-08-01
Fire resistance tests for service installations - Part 3: Penetration
seals; German version EN 1366-3:2021+A1:2024
DIN
DIN EN ISO 11140-4:2025-08
En Vigor
2025-08-01
Sterilization of health care products - Chemical indicators - Part 4:
Type 2 indicator systems as an alternative to the Bowie and Dick-type
test for the detection of steam penetration (ISO/DIS 11140-4:2025);
German and English version prEN ISO 11140-4:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO 11140-4 (2007-07).
DIN
DIN EN 16304:2025-08
En Vigor
2025-08-01
Automatic vent valves for gas burners and gas burning appliances; German
version EN 16304:2022+A1:2024 / Note: DIN EN 16304 (2024-02) remains
valid alongside this standard until 2027-11-30.*Applies in conjunction
with DIN EN 13611 (2022-01).
DIN
DIN EN ISO 19152-2:2025-11
En Vigor
2025-11-01
Geographic information - Land Administration Domain Model (LADM) - Part
2: Land registration (ISO 19152-2:2025); English version EN ISO 19152-2:2025
