Filtrar:
DIN
DIN EN ISO 11357-3:2025-09
En Vigor
2025-09-01
Plastics - Differential scanning calorimetry (DSC) - Part 3:
Determination of temperature and enthalpy of melting and crystallization
(ISO 11357-3:2025); German version EN ISO 11357-3:2025
DIN
DIN EN ISO 8502-5:2025-09
En Vigor
2025-09-01
Preparation of steel substrates before application of paints and related
products - Tests for the assessment of surface cleanliness - Part 5:
Measurement of chloride on steel surfaces prepared for painting (ion
detection tube method) (ISO 8502-5:2025); German version EN ISO 8502-5:2025
DIN
DIN EN ISO 10325:2025-09
En Vigor
2025-09-01
Fibre ropes - High modulus polyethylene - 8-strand braided ropes,
12-strand braided ropes and covered ropes (ISO/DIS 10325:2025); German
and English version prEN ISO 10325:2025 / Note: Date of issue
2025-07-25*Intended as replacement for DIN EN ISO 10325 (2019-01).
DIN
DIN 17745:2025-09
En Vigor
2025-09-01
Wrought alloys of nickel and iron - Chemical composition
DIN
DIN EN ISO 16276-1:2025-09
En Vigor
2025-09-01
Corrosion protection of steel structures by protective paint systems -
Assessment of, and acceptance criteria for, the adhesion/cohesion
(fracture strength) of a coating - Part 1: Pull-off testing (ISO
16276-1:2025); German version EN ISO 16276-1:2025
DIN
DIN EN 3636:2025-09
En Vigor
2025-09-01
Aerospace series - Screws, reduced pan head, offset cruciform recess,
relieved shank, long thread, in heat resisting steel FEPA92HT (A286),
silver plated - Classification: 900 MPa/650 °C; German and English
version prEN 3636:2025 / Note: Date of issue 2025-07-25*Intended as
replacement for DIN EN 3636 (2008-12).
DIN
DIN EN ISO 8741:2025-09
En Vigor
2025-09-01
Fasteners - Reverse-taper grooved pins - Half-length progressive grooves
(ISO 8741:2025); German version EN ISO 8741:2025
DIN
DIN EN ISO 10512:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with
non-metallic insert), with fine pitch thread (ISO 10512:2025); German
version EN ISO 10512:2025
DIN
DIN EN IEC 60352-7:2025-09
En Vigor
2025-09-01
Solderless connections - Part 7: Spring clamp connections - General
requirements, test methods and practical guidance (IEC
48B/3108/CDV:2024); German and English version prEN IEC 60352-7:2024 /
Note: Date of issue 2025-08-01*Intended as replacement for DIN EN IEC
60352-7 (2023-12).
DIN
DIN EN ISO 14096-1:2025-09
En Vigor
2025-09-01
Non-destructive testing - Qualification of radiographic film
digitisation systems - Part 1: Definitions, quantitative measurements of
image quality parameters, standard reference film and qualitative
control (ISO/DIS 14096-1:2025); German and English version prEN ISO
14096-1:2025 / Note: Date of issue 2025-08-15*Intended as replacement
for DIN EN ISO 14096-1 (2020-10).
DIN
DIN ISO 37001:2025-09
En Vigor
2025-09-01
Anti-bribery management systems - Requirements with guidance for use
(ISO 37001:2025); Text in German and English / Note: Date of issue
2025-08-15*Intended as replacement for DIN ISO 37001 (2018-05).
DIN
DIN EN ISO 787-5:2025-09
En Vigor
2025-09-01
General methods of test for pigments and extenders - Part 5:
Determination of oil absorption value (ISO/DIS 787-5:2025); German and
English version prEN ISO 787-5:2025 / Note: Date of issue
2025-08-22*Intended as replacement for DIN EN ISO 787-5 (1995-10).
DIN
DIN 60022-4:2025-09
En Vigor
2025-09-01
Spacer textiles - Part 4: Determination of compression set / Note: Date
of issue 2025-08-15
DIN
DIN EN ISO/IEC 5259-4:2025-09
En Vigor
2025-09-01
Artificial intelligence - Data quality for analytics and machine
learning (ML) - Part 4: Data quality process framework (ISO/IEC
5259-4:2024); German version EN ISO/IEC 5259-4:2025
DIN
DIN EN 13036-8:2025-09
En Vigor
2025-09-01
Road and airfield surface characteristics - Test methods - Part 8:
Determination of transverse unevenness and crossfall indices; German
version EN 13036-8:2025
DIN
DIN EN 6118:2025-09
En Vigor
2025-09-01
Aerospace series - Pure aluminium IVD coating for fasteners; German and
English version EN 6118:2025
DIN
DIN EN ISO/IEC 8183:2025-09
En Vigor
2025-09-01
Information technology - Artificial intelligence - Data life cycle
framework (ISO/IEC 8183:2023); German version EN ISO/IEC 8183:2024
DIN
DIN EN 17961:2025-09
En Vigor
2025-09-01
Mountaineering equipment - Load sharing devices - Safety requirements
and test methods; German version EN 17961:2025
DIN
DIN EN ISO 18374:2025-09
En Vigor
2025-09-01
Dentistry - Artificial intelligence (AI) and augmented intelligence
(AuI) based 2D radiograph analysis - Data generation, data annotation
and data processing (ISO 18374:2025); German version EN ISO 18374:2025
DIN
DIN 30786-3:2025-09
En Vigor
2025-09-01
Transportation loads - Data collection of dynamic mechanical loads -
Part 3: Examples of measurements of vertical transport loads from 2013
and 2021
DIN
DIN EN 590:2025-09
En Vigor
2025-09-01
Automotive fuels - Diesel - Requirements and test methods; German
version EN 590:2025
DIN
DIN EN 18218-1:2025-09
En Vigor
2025-09-01
Food authenticity - Non-targeted testing methods - Part 1: General
considerations and definitions; German and English version prEN
18218-1:2025 / Note: Date of issue 2025-08-01
DIN
DIN EN 1998-4/NA:2025-09
En Vigor
2025-09-01
National Annex - Nationally determined parameters - Eurocode 8: Design
of structures for earthquake resistance - Part 4: Silos, tanks and
pipelines / Note: Date of issue 2025-07-25*Applies in conjunction with
DIN EN 1998-4 (2023-09).
DIN
DIN EN ISO 1891-2:2025-09
En Vigor
2025-09-01
Fasteners - Vocabulary - Part 2: Coatings (ISO/DIS 1891-2:2025);
Multilingual version prEN ISO 1891-2:2025 / Note: Date of issue
2025-08-15*Intended as replacement for DIN EN ISO 1891-2 (2015-01).
DIN
DIN EN ISO 8746:2025-09
En Vigor
2025-09-01
Fasteners - Grooved pins with round head - Full-length diamond grooves
(ISO 8746:2025); German version EN ISO 8746:2025
DIN
DIN EN 6046:2025-09
En Vigor
2025-09-01
Aerospace series - Bearing, spherical, plain, in corrosion resisting
steel - Narrow series - Dimensions and loads - Inch series; German
version ASD-STAN prEN 6046:2025 / Note: Date of issue
2025-08-15*Intended as replacement for DIN EN 6046 (2020-05).
DIN
DIN CEN/TS 18163:2025-09
En Vigor
2025-09-01
Residential wood logs burning appliances - Overload test procedures;
German version CEN/TS 18163:2025
DIN
DIN EN 17161:2025-09
En Vigor
2025-09-01
Design for All approach - Managing accessibility of products and
services; German and English version prEN 17161:2025 / Note: Date of
issue 2025-08-15*Intended as replacement for DIN EN 17161 (2019-11).
DIN
DIN 56928:2025-09
En Vigor
2025-09-01
Entertainment Technology - Technical ceilings and grids - Safety
requirements / Note: DIN 56928 (2014-02) remains valid alongside this
standard until 2026-02-28.
DIN
DIN 10186:2025-09
En Vigor
2025-09-01
Microbiological analysis of milk - Enumeration of yeasts and moulds -
Reference method
DIN
DIN EN 15191:2025-09
En Vigor
2025-09-01
Precast concrete products - Classification of glassfibre reinforced
concrete performance; German version EN 15191:2024
DIN
DIN 16191:2025-09
En Vigor
2025-09-01
Industrial liquid-in-glass thermometers with V-shaped case - Nominal
size 200, 135° angle stem - Dimensions and nominal ranges / Note: Date
of issue 2025-08-08*Intended as replacement for DIN 16191 (1991-09).
DIN
DIN 5031-100:2025-09
En Vigor
2025-09-01
Optical radiation physics and illuminating engineering - Part 100:
Melanopic effects of ocular light on human beings - Quantities, symbols
and action spectra
DIN
DIN EN 60317-37/A1:2025-09
En Vigor
2025-09-01
Specifications for particular types of winding wires - Part 37:
Polyesterimide enamelled round copper wire, class 180, with a bonding
layer (IEC 60317-37:2013/AMD1:2024); German version EN
60317-37:2014/A1:2024 / Note: Date of issue 2025-08-08*Intended as an
amendment to DIN EN 60317-37 (2014-10).
DIN
DIN EN 4641-102:2025-09
En Vigor
2025-09-01
Aerospace series - Cables, optical 125 µm diameter cladding - Part 102:
Semi-loose 62,5 µm/125 µm GI fibre nominal 1,8 mm outside diameter -
Product standard; German and English version EN 4641-102:2025
DIN
DIN EN ISO 24181-1:2025-09
En Vigor
2025-09-01
Rare earth - Determination of non-rare earth impurities in individual
rare earth metals and their oxides - ICP-AES - Part 1: Analysis of Al,
Ca, Mg, Fe and Si (ISO 24181-1:2024); German and English version prEN
ISO 24181-1:2025 / Note: Date of issue 2025-08-08
DIN
DIN CEN/TS 18101:2025-09
En Vigor
2025-09-01
Circular design of fishing gear and aquaculture equipment - Terms and
definitions; German version CEN/TS 18101:2024
DIN
DIN EN ISO 7040:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with
non-metallic insert) (ISO 7040:2025); German version EN ISO 7040:2025
DIN
DIN EN 868-3:2025-09
En Vigor
2025-09-01
Packaging for terminally sterilized medical devices - Part 3: Paper for
use in the manufacture of paper bags (specified in EN 868-4) and in the
manufacture of pouches and reels (specified in EN 868-5) - Requirements
and test methods; German version EN 868-3:2025
DIN
DIN EN ISO 19085-5:2025-09
En Vigor
2025-09-01
Woodworking machines - Safety - Part 5: Dimension saws (ISO
19085-5:2024); German version EN ISO 19085-5:2024
