Filtrar:
DIN
DIN ISO 813-2:2025-08
En Vigor
2025-08-01
Rubber, vulcanized or thermoplastic - Determination of adhesion to a
rigid substrate - Part 2: Adhesion of a soft thermoplastic elastomer
layer (ISO 813-2:2024)
DIN
DIN EN ISO/IEC 27000:2025-08
En Vigor
2025-08-01
Information technology - Security techniques - Information security
management systems - Overview and vocabulary (ISO/IEC DIS 27000:2025);
German and English version prEN ISO/IEC 27000:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO/IEC 27000 (2020-06).
DIN
DIN EN 4500-002:2025-08
En Vigor
2025-08-01
Aerospace series - Metallic materials - Rules for drafting and
presentation of material standards - Part 002: Specific rules for
aluminium, aluminium alloys and magnesium alloys; German and English
version EN 4500-002:2024
DIN
DIN EN 18208:2025-08
En Vigor
2025-08-01
Liquid-to-liquid single-phase heat exchangers - Test procedure for
determining performance; German and English version prEN 18208:2025 /
Note: Date of issue 2025-07-18
DIN
DIN EN 18220:2025-08
En Vigor
2025-08-01
Digital product passport - Data Carriers; German and English version
prEN 18220:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN 88-2:2025-08
En Vigor
2025-08-01
Safety and control devices for gas burners and gas burning appliances -
Part 2: Pressure regulators for inlet pressures above 50 kPa up to and
including 500 kPa; German version EN 88-2:2022+A1:2024 / Note: DIN EN
88-2 (2024-02) remains valid alongside this standard until 2027-11-30.
DIN
DIN EN 1868:2025-08
En Vigor
2025-08-01
Personal fall protection equipment - List of equivalent terms; German
and English version prEN 1868:2025 / Note: Date of issue
2025-07-04*Intended as replacement for DIN EN 1868 (1997-08).
DIN
DIN EN 12266-1:2025-08
En Vigor
2025-08-01
Industrial valves - Testing of metallic valves - Part 1: Pressure tests,
test procedures and acceptance criteria - Mandatory requirements; German
and English version prEN 12266-1:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN 12266-1 (2012-06).
DIN
DIN 19294-2:2025-08
En Vigor
2025-08-01
Devices for the disinfection of water using ultraviolet radiation - Part
2: Devices equipped with UV medium pressure lamps - Requirements and
testing / Note: Date of issue 2025-06-27
DIN
DIN 30722-2:2025-08
En Vigor
2025-08-01
Roller contact tipper vehicles, roller containers - General requirements
and marking - Part 2: Roller contact tipper vehicles up to 40 t, roller
containers type 1570 made from steel / Note: DIN 30722-2 (2021-12)
remains valid alongside this standard until 2026-01-31.
DIN
DIN 12781:2025-08
En Vigor
2025-08-01
Laboratory glassware - Straight enclosed scale laboratory thermometers
for partial immersion
DIN
DIN EN ISO 2400:2025-08
En Vigor
2025-08-01
Non-destructive testing - Ultrasonic testing - Specification for
standard block No. 1 (ISO 2400:2025); German version EN ISO 2400:2025
DIN
DIN EN ISO 505:2025-08
En Vigor
2025-08-01
Conveyor belts - Method for the determination of the tear propagation
resistance of textile conveyor belts (ISO 505:2025); German version EN
ISO 505:2025
DIN
DIN 32793:2025-08
En Vigor
2025-08-01
Information technology - Automatic identification and data capture
techniques - ObjectID-URL / Note: Date of issue 2025-07-18
DIN
DIN EN ISO/IEC 80079-34:2025-08
En Vigor
2025-08-01
Explosive atmospheres - Part 34: Application of quality management
systems for Ex Product manufacture (ISO/IEC DIS 80079-34:2025); German
and English version prEN ISO/IEC 80079-34:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO/IEC 80079-34 (2020-06).
DIN
DIN EN ISO 5463:2025-08
En Vigor
2025-08-01
Geometrical product specifications (GPS) - Rotary axis form-measuring
instruments - Design and metrological characteristics (ISO 5463:2024);
German version EN ISO 5463:2024
DIN
DIN EN ISO 11135:2025-08
En Vigor
2025-08-01
Sterilization of health-care products - Ethylene oxide - Requirements
for the development, validation and routine control of a sterilization
process for medical devices (ISO/DIS 11135:2025); German and English
version prEN ISO 11135:2025 / Note: Date of issue 2025-07-04*Intended as
replacement for DIN EN ISO 11135 (2020-04).
DIN
DIN EN ISO 23611-6:2025-08
En Vigor
2025-08-01
Soil quality - Sampling of soil invertebrates - Part 6: Guidance for the
design of sampling programmes with soil invertebrates (ISO/DIS
23611-6:2025); German and English version prEN ISO 23611-6:2025 / Note:
Date of issue 2025-07-18*Intended as replacement for DIN EN ISO 23611-6 (2013-11).
DIN
DIN EN ISO 2076:2025-08
En Vigor
2025-08-01
Textiles - Man-made fibres - Generic names (ISO/DIS 2076:2025); German
and English version prEN ISO 2076:2025 / Note: Date of issue
2025-06-27*Intended as replacement for DIN EN ISO 2076 (2022-02).
DIN
DIN EN 1520:2025-08
En Vigor
2025-08-01
Precast lightweight concrete products with an open structure; German and
English version prEN 1520:2025 / Note: Date of issue 2025-07-11*Intended
as replacement for DIN EN 1520 (2011-06).
DIN
DIN EN 18066:2025-08
En Vigor
2025-08-01
Plastics - Design for recycling of PVC based profiles for construction
products; German version EN 18066:2025
DIN
DIN EN ISO 23697-2:2025-08
En Vigor
2025-08-01
Water quality - Determination of total bound nitrogen
(ST-TN<(Index)b>) in water using small-scale sealed tubes - Part
2: Chromotropic acid colour reaction (ISO 23697-2:2023); German and
English version prEN ISO 23697-2:2025 / Note: Date of issue 2025-07-11
DIN
DIN EN ISO 10328:2025-08
En Vigor
2025-08-01
Prosthetics - Structural testing of lower-limb prostheses - Requirements
and test methods (ISO/DIS 10328:2025); German and English version prEN
ISO 10328:2025 / Note: Date of issue 2025-07-04*Intended as replacement
for DIN EN ISO 10328 (2016-12).
DIN
DIN EN 16211:2025-08
En Vigor
2025-08-01
Ventilation for buildings - Measurement of air flow rates on site -
Methods; German version EN 16211:2024
DIN
DIN EN ISO 21611:2025-08
En Vigor
2025-08-01
Dentistry - Vocabulary for Source Conclusion for Human Identification by
Dental Evidence (ISO/DIS 21611:2025); German and English version prEN
ISO 21611:2025 / Note: Date of issue 2025-07-18
DIN
DIN ISO 30401/A2:2025-08
En Vigor
2025-08-01
Knowledge management systems - Requirements - Amendment 2: Climate
action changes (ISO 30401:2018/Amd.2:2024)
DIN
DIN EN 1366-3:2025-08
En Vigor
2025-08-01
Fire resistance tests for service installations - Part 3: Penetration
seals; German version EN 1366-3:2021+A1:2024
DIN
DIN EN ISO 11140-4:2025-08
En Vigor
2025-08-01
Sterilization of health care products - Chemical indicators - Part 4:
Type 2 indicator systems as an alternative to the Bowie and Dick-type
test for the detection of steam penetration (ISO/DIS 11140-4:2025);
German and English version prEN ISO 11140-4:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO 11140-4 (2007-07).
DIN
DIN EN 16304:2025-08
En Vigor
2025-08-01
Automatic vent valves for gas burners and gas burning appliances; German
version EN 16304:2022+A1:2024 / Note: DIN EN 16304 (2024-02) remains
valid alongside this standard until 2027-11-30.*Applies in conjunction
with DIN EN 13611 (2022-01).
DIN
DIN EN 4500-005:2025-08
En Vigor
2025-08-01
Aerospace series - Metallic materials - Rules for drafting and
presentation of material standards - Part 005: Specific rules for
steels; German and English version EN 4500-005:2024
DIN
DIN EN 15700/A1:2025-08
En Vigor
2025-08-01
Safety for conveyor belts for winter sport or tourist use; German and
French version EN 15700:2023/prA1:2025 / Note: Date of issue
2025-07-18*Intended as an amendment to DIN EN 15700 (2023-10).
DIN
DIN EN 1915-2:2025-08
En Vigor
2025-08-01
Aircraft ground support equipment - General requirements - Part 2:
Stability and strength requirements, calculations and test methods;
German and English version prEN 1915-2:2025 / Note: Date of issue
2025-07-11*Intended as replacement for DIN EN 1915-2 (2009-06).
DIN
DIN 30722-3:2025-08
En Vigor
2025-08-01
Roller contact tipper vehicles, roller containers - General requirements
and marking - Part 3: Roller contact tipper vehicles up to 12 t, roller
containers type 900 made from steel / Note: DIN 30722-3 (2021-12)
remains valid alongside this standard until 2026-01-31.
DIN
DIN EN 12602:2025-08
En Vigor
2025-08-01
Precast autoclaved aerated concrete products; German and English version
prEN 12602:2025 / Note: Date of issue 2025-07-11*Intended as replacement
for DIN EN 12602 (2016-12).
DIN
DIN 33463:2025-08
En Vigor
2025-08-01
Conference packages / Note: Date of issue 2025-07-04
DIN
DIN EN 4533-001:2025-08
En Vigor
2025-08-01
Aerospace series - Fibre optic systems - Handbook - Part 001:
Termination methods and tools; German version ASD-STAN prEN
4533-001:2025 / Note: Date of issue 2025-06-27*Intended as replacement
for DIN EN 4533-001 (2022-08).
DIN
DIN EN ISO 28399:2025-08
En Vigor
2025-08-01
Dentistry - External tooth bleaching products (ISO/DIS 28399:2025);
German and English version prEN ISO 28399:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN ISO 28399 (2021-07).
DIN
DIN EN ISO 26304:2025-08
En Vigor
2025-08-01
Welding consumables - Solid wire electrodes, tubular cored electrodes
and electrode-flux combinations for submerged arc welding of high
strength steels - Classification (ISO 26304:2025); German version EN ISO 26304:2025
DIN
DIN 14800-4:2025-08
En Vigor
2025-08-01
Fire-fighting equipment for fire-fighting and rescue service vehicles -
Part 4: Tool chest for chimney
DIN
DIN ISO 18115-1:2025-08
En Vigor
2025-08-01
Surface chemical analysis - Vocabulary - Part 1: General terms and terms
used in spectroscopy (ISO 18115-1:2023); Text in German and English /
Note: Date of issue 2025-07-18*Intended as replacement for DIN ISO
18115-1 (2017-07).
