Filtrar:
DIN
DIN EN 15767-3:2025-07
En Vigor
2025-07-01
Portable equipment for projecting extinguishing agents and firefighting
support operations - Portable monitors - Part 3: Foam devices; German
and English version prEN 15767-3:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 15767-3 (2010-12).
DIN
DIN EN ISO 17831-1:2025-07
En Vigor
2025-07-01
Solid biofuels - Determination of mechanical durability of pellets and
briquettes - Part 1: Pellets (ISO 17831-1:2025); German version EN ISO 17831-1:2025
DIN
DIN 65431:2025-07
En Vigor
2025-07-01
Aerospace series - Sleeve - Wall thickness 0,5 mm, for fasteners with
countersunk head; Text in German and English
DIN
DIN EN 74-1:2025-07
En Vigor
2025-07-01
Couplers, spigot pins and baseplates for use in falsework and scaffolds
- Part 1: Couplers for tubes - Requirements and test procedures; German
version EN 74-1:2022+A1:2025
DIN
DIN EN 3155-017:2025-07
En Vigor
2025-07-01
Aerospace series - Electrical contacts used in elements of connection -
Part 017: Contacts, electrical, relay base, female 017, type A, crimp,
class P - Product standard; German version ASD-STAN prEN 3155-017:2025 /
Note: Date of issue 2025-06-06*Applies in conjunction with DIN EN
3155-001 (2024-10).*Intended as replacement for DIN EN 3155-017 (2020-04).
DIN
DIN
DIN EN 9247:2025-07
En Vigor
2025-07-01
Aerospace series - Programme management - Verification and validation of
numerical models and simulations; English version prEN 9247:2025 / Note:
Date of issue 2025-06-13
DIN
DIN EN 17240:2025-07
En Vigor
2025-07-01
Intelligent transport systems - ESafety - ECall end to end conformance
testing for IMS packet switched based systems; German version EN 17240:2024
DIN
DIN EN 81-41:2025-07
En Vigor
2025-07-01
Safety rules for the construction and installation of lifts - Special
lifts for the transport of persons and goods - Part 41: Vertical lifting
platforms intended for use by persons with impaired mobility; German
version EN 81-41:2024
DIN
DIN 10371:2025-07
En Vigor
2025-07-01
Analysis of tobacco and tobacco products - Determination of glucose,
fructose and sucrose contents - Method using high performance liquid chromatography
DIN
DIN EN ISO 12895:2025-07
En Vigor
2025-07-01
Safety of machinery Identification of whole body access and prevention
of associated risk(s) (ISO/DIS 12895:2025); German and English version
prEN ISO 12895:2025 / Note: Date of issue 2025-06-06
DIN
DIN EN 12098-1:2025-07
En Vigor
2025-07-01
Energy performance of buildings - Controls for heating systems - Part 1:
Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8;
German version EN 12098-1:2022
DIN
DIN EN ISO 22705-1:2025-07
En Vigor
2025-07-01
Springs - Measurement and test parameters - Part 1: Cold formed
cylindrical helical compression springs (ISO 22705-1:2021); German and
English version prEN ISO 22705-1:2025 / Note: Date of issue
2025-06-13*Intended as replacement for DIN 2191-1 (2017-05).
DIN
DIN EN ISO 8067:2025-07
En Vigor
2025-07-01
Flexible cellular polymeric materials - Determination of tear strength
(ISO/DIS 8067:2025); German and English version prEN ISO 8067:2025 /
Note: Date of issue 2025-05-30*Intended as replacement for DIN EN ISO
8067 (2018-12).
DIN
DIN EN 1918-5:2025-07
En Vigor
2025-07-01
Gas infrastructure - Underground gas storage - Part 5: Functional
recommendations for surface facilities; German and English version prEN
1918-5:2025 / Note: Date of issue 2025-06-20*Intended as replacement for
DIN EN 1918-5 (2016-11).
DIN
DIN EN 1918-2:2025-07
En Vigor
2025-07-01
Gas infrastructure - Underground gas storage - Part 2: Functional
recommendations for storage in oil and gas fields; German and English
version prEN 1918-2:2025 / Note: Date of issue 2025-06-20*Intended as
replacement for DIN EN 1918-2 (2016-11).
DIN
DIN EN 15751:2025-07
En Vigor
2025-07-01
Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with
diesel fuel - Determination of oxidation stability by accelerated
oxidation method at 110 °C; German version EN 15751:2025
DIN
DIN EN 14363-3:2025-07
En Vigor
2025-07-01
Railway applications - Testing and simulation for the acceptance of
running characteristics of railway vehicles - Part 3: Stationary tests
not obligatory on a European level; German and English version prEN
14363-3:2025 / Note: Date of issue 2025-05-30*Intended as replacement
for DIN EN 14363 (2022-10).
DIN
DIN 27201-10:2025-07
En Vigor
2025-07-01
State of railway vehicles - Basic principles - Part 10: Thermal spraying
/ Note: DIN 27201-10 (2014-05) remains valid alongside this standard
until 2025-12-31.
DIN
DIN EN ISO 16646:2025-07
En Vigor
2025-07-01
Fusion installations - Criteria for the design and operation of
confinement and ventilation systems of tritium fusion facilities and
fusion fuel handling facilities (ISO 16646:2024); German and English
version prEN ISO 16646:2025 / Note: Date of issue 2025-06-06
DIN
DIN ISO 4156-1:2025-07
En Vigor
2025-07-01
Straight cylindrical involute splines - Metric modul, side fit - Part 1:
Generalities (ISO 4156-1:2021); Text in German and English / Note: Date
of issue 2025-06-06
DIN
DIN
DIN EN IEC 63267-2-2:2025-07
En Vigor
2025-07-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces for enhanced macro bend multimode fibres - Part 2-2:
Connection parameters of physically contacting 50 µm core diameter
fibres - Non-angled and angled for reference connector applications (IEC
63267-2-2:2024); German version EN IEC 63267-2-2:2024
DIN
DIN EN 13223:2025-07
En Vigor
2025-07-01
Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment; German version prEN
13223:2025 / Note: Date of issue 2025-06-13*Intended as replacement for
DIN EN 13223 (2023-02).
DIN
DIN EN 4880:2025-07
En Vigor
2025-07-01
Aerospace series - General technical specification for standard parts;
German and English version prEN 4880:2025 / Note: Date of issue
2025-06-20*Intended as replacement for DIN EN 4880 (2023-10).
DIN
DIN EN ISO 19388:2025-07
En Vigor
2025-07-01
Sludge recovery, recycling, treatment and disposal - Requirements and
recommendations for the operation of anaerobic digestion facilities (ISO
19388:2023); German and English version prEN ISO 19388:2025 / Note: Date
of issue 2025-06-13
DIN
DIN EN ISO 3451-5:2025-07
En Vigor
2025-07-01
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO
3451-5:2025); German version EN ISO 3451-5:2025
DIN
DIN EN ISO 23611-1:2025-07
En Vigor
2025-07-01
Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and
extraction of earthworms (ISO/DIS 23611-1:2025); German and English
version prEN ISO 23611-1:2025 / Note: Date of issue 2025-06-06*Intended
as replacement for DIN EN ISO 23611-1 (2018-10).
DIN
DIN 17029:2025-07
En Vigor
2025-07-01
Tolerances and test methods for heat-treated parts / Note: Date of issue 2025-05-30
DIN
DIN EN ISO/IEC 19788-1:2025-07
En Vigor
2025-07-01
Information technology for learning, education and training - Metadata
for learning resources - Part 1: Framework (ISO/IEC 19788-1:2024);
German and English version prEN ISO/IEC 19788-1:2025 / Note: Date of
issue 2025-06-06*Intended as replacement for DIN EN ISO/IEC 19788-1 (2013-03).
DIN
DIN 19303:2025-07
En Vigor
2025-07-01
Paperboard - Terms and grades / Note: Date of issue 2025-05-30*Intended
as replacement for DIN 19303 (2011-03).
DIN
DIN EN 319532-4:2025-07
En Vigor
2025-07-01
Electronic Signatures and Infrastructures (ESI) - Registered Electronic
Mail (REM) Services - Part 4: Interoperability profiles (Endorsement of
the English version EN 319 532-4 V1.3.1 (2024-01) as a German standard)
/ Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN ISO/ASTM 52933:2025-07
En Vigor
2025-07-01
Additive manufacturing - Environment, health and safety - Test method
for the hazardous substances emitted from material extrusion type 3D
printers in the non-industrial places (ISO/ASTM 52933:2024); German
version EN ISO/ASTM 52933:2024
DIN
DIN EN ISO 11990:2025-07
En Vigor
2025-07-01
Lasers and laser-related equipment - Determination of laser resistance
of tracheal tube shaft and tracheal tube cuffs (ISO/DIS 11990:2025);
German and English version prEN ISO 11990:2025 / Note: Date of issue
2025-06-13*Intended as replacement for DIN EN ISO 11990 (2018-12).
DIN
DIN 14880:2025-07
En Vigor
2025-07-01
Boxes for fire equipment - Boxes made of wood, light metal or otherwise
suitable materials
DIN
DIN EN ISO 3691-1:2025-07
En Vigor
2025-07-01
Industrial trucks - Safety requirements and verification - Part 1:
Self-propelled industrial trucks, other than driverless trucks,
variable-reach trucks and burden-carrier trucks (ISO/DIS 3691-1:2025);
German and English version prEN ISO 3691-1:2025 / Note: Date of issue
2025-06-20*Intended as replacement for DIN EN ISO 3691-1 (2020-11).
DIN
DIN EN 18207:2025-07
En Vigor
2025-07-01
Algae and algae products - Determination of the uronic acids content of
brown seaweed and alginate products; German and English version prEN
18207:2025 / Note: Date of issue 2025-06-20
DIN
DIN EN 3155-070:2025-07
En Vigor
2025-07-01
Aerospace series - Electrical contacts used in elements of connection -
Part 070: Contacts, electrical, male 70, type A, crimp, class S -
Product standard; German version ASD-STAN prEN 3155-070:2025 / Note:
Date of issue 2025-06-06*Applies in conjunction with DIN EN 3155-001
(2024-10).*Intended as replacement for DIN EN 3155-070 (2020-12).
DIN
DIN EN 4529-003:2025-07
En Vigor
2025-07-01
Aerospace series - Elements of electrical and optical connection -
Sealing plugs - Part 003: Class T - Product standard; German and English
version prEN 4529-003:2025 / Note: Date of issue 2025-05-30*Intended as
replacement for DIN EN 4529-003 (2007-06).
DIN
DIN EN 6054:2025-07
En Vigor
2025-07-01
Aerospace series - Collar, swage locking, shear type, in aluminium alloy
6061, conversion coating - Inch series; German version ASD-STAN prEN
6054:2025 / Note: Date of issue 2025-05-30
