Filtrar:
DIN
DIN 4000-89:2025-07
En Vigor
2025-07-01
Tabular layouts of properties - Part 89: Adaptive items for tools and
extenders / Note: Date of issue 2025-06-20*Intended as replacement for
DIN 4000-89 (2012-03).
DIN
DIN EN ISO 15883-2:2025-07
En Vigor
2025-07-01
Washer-disinfectors - Part 2: Requirements and tests for
washer-disinfectors employing thermal disinfection for critical and
semi-critical medical devices (ISO 15883-2:2024); German version EN ISO
15883-2:2025 / Note: Applies in conjunction with DIN EN ISO 15883-1 (2025-07).
DIN
DIN EN 397:2025-07
En Vigor
2025-07-01
Industrial protective helmets; German version EN 397:2025
DIN
DIN EN ISO 11781:2025-07
En Vigor
2025-07-01
Molecular biomarker analysis - Requirements and guidance for
single-laboratory validation of qualitative real-time polymerase chain
reaction (PCR) methods (ISO 11781:2025); German version EN ISO 11781:2025
DIN
DIN 76-1:2025-07
En Vigor
2025-07-01
Fasteners - Thread run-outs and thread undercuts - Part 1: For ISO
metric threads in accordance with DIN 13-1
DIN
DIN EN 1918-1:2025-07
En Vigor
2025-07-01
Gas infrastructure - Underground gas storage - Part 1: Functional
recommendations for storage in aquifers; German and English version prEN
1918-1:2025 / Note: Date of issue 2025-06-20*Intended as replacement for
DIN EN 1918-1 (2016-11).
DIN
DIN EN 18205:2025-07
En Vigor
2025-07-01
Qualification of welding procedures for plastic materials; German and
English version prEN 18205:2025 / Note: Date of issue 2025-05-30
DIN
DIN EN 17968:2025-07
En Vigor
2025-07-01
Rough-terrain variable-reach tractors - Safety requirements and
verification for permanently mounted equipment; German and English
version prEN 17968:2025 / Note: Date of issue 2025-05-30*Intended as
replacement for DIN CEN/TS 1459-8 (2019-03).
DIN
DIN EN IEC 62343-1:2025-07
En Vigor
2025-07-01
Dynamic modules - Part 1: Performance standards - General conditions
(IEC 62343-1:2019 + AMD1:2023); German version EN IEC 62343-1:2019 +
A1:2024 / Note: DIN EN IEC 62343-1 (2020-02) remains valid alongside
this standard until 2027-01-18.
DIN
DIN EN 3475-805:2025-07
En Vigor
2025-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 805: Characteristic impedance; German and English version prEN
3475-805:2025 / Note: Date of issue 2025-06-13*Intended as replacement
for DIN EN 3475-805 (2002-12).
DIN
DIN EN 15698-2:2025-07
En Vigor
2025-07-01
District heating pipes - Bonded twin pipe systems for directly buried
hot water networks - Part 2: Factory made fitting and valve assemblies
of steel service pipes, polyurethane thermal insulation and one casing
of polyethylene; German version EN 15698-2:2025
DIN
DIN EN 14363-1:2025-07
En Vigor
2025-07-01
Railway applications - Testing and simulation for the assessment of
running characteristics of rail vehicles operated on the heavy rail
network - Part 1: General; German and English version prEN 14363-1:2025
/ Note: Date of issue 2025-05-30*Intended as replacement for DIN EN
14363 (2022-10).
DIN
DIN EN 6050:2025-07
En Vigor
2025-07-01
Aerospace series - Pin, close tolerance, swage locking, 100° countersunk
reduced head, shear type, in aluminium alloy 7050, conversion coating -
Inch series; German version ASD-STAN prEN 6050:2025 / Note: Date of
issue 2025-05-30
DIN
DIN EN 15767-2:2025-07
En Vigor
2025-07-01
Portable equipment for projecting extinguishing agents and firefighting
support operations - Portable monitors - Part 2: Water nozzles; German
and English version prEN 15767-2:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 15767-2 (2009-09).
DIN
DIN EN 15522-2:2025-07
En Vigor
2025-07-01
Oil spill identification - Petroleum and petroleum related products -
Part 2: Analytical method and interpretation of results based on GC-FID
and GC-low resolution-MS analyses; German version EN 15522-2:2023+A1:2025
DIN
DIN EN 508-2:2025-07
En Vigor
2025-07-01
Roofing and cladding products from metal sheet - Specification for
self-supporting products of steel, aluminium or stainless steel sheet -
Part 2: Aluminium; German and English version prEN 508-2:2025 / Note:
Date of issue 2025-06-20*Intended as replacement for DIN EN 508-2 (2019-10).
DIN
DIN EN 13451-3:2025-07
En Vigor
2025-07-01
Swimming pool equipment - Part 3: Additional specific safety
requirements and test methods for inlets and outlets and water/air based
water leisure features installed in pools for public use; German version
EN 13451-3:2022+A1:2025 / Note: DIN EN 13451-3 (2022-10) remains valid
alongside this standard until 2025-11-30.
DIN
DIN EN ISO 16140-4:2025-07
En Vigor
2025-07-01
Microbiology of the food chain - Method validation - Part 4: Protocol
for method validation in a single laboratory (ISO 16140-4:2020 + Amd
1:2024); German version EN ISO 16140-4:2020 + A1:2024
DIN
DIN EN ISO 19424:2025-07
En Vigor
2025-07-01
Refrigerated food lockers - Thermal and energy performance, ratings,
environmental test conditions and associated testing methods (ISO/DIS
19424:2025); German and English version prEN ISO 19424:2025 / Note: Date
of issue 2025-06-13
DIN
DIN EN 15714-4:2025-07
En Vigor
2025-07-01
Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators
for industrial valves - Basic requirements; German version EN 15714-4:2025
DIN
DIN EN 12572-1:2025-07
En Vigor
2025-07-01
Artificial climbing structures - Part 1: Safety requirements and test
methods for ACS with protection points; German and English version prEN
12572-1:2025 / Note: Date of issue 2025-06-13*Intended as replacement
for DIN EN 12572-1 (2017-05).
DIN
DIN 14095:2025-07
En Vigor
2025-07-01
Ground plans for components for buildings for fire brigade use
DIN
DIN EN 448:2025-07
En Vigor
2025-07-01
District heating pipes - Bonded single pipe systems for directly buried
hot water networks - Factory made fitting assemblies of steel service
pipes, polyurethane thermal insulation and a casing of polyethylene;
German version EN 448:2025
DIN
DIN EN 378-3:2025-07
En Vigor
2025-07-01
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 3: Installation site and personal protection; German
and English version prEN 378-3:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 378-3 (2020-12).
DIN
DIN EN 3687:2025-07
En Vigor
2025-07-01
Aerospace series - Bolt, normal hexagon head, relieved shank, long
thread, in heat resisting steel FE-PA2601 (A286), silver plated -
Classification: 1 100 MPa/650 °C; German version ASD-STAN prEN 3687:2025
/ Note: Date of issue 2025-05-30*Intended as replacement for DIN EN 3687 (2012-07).
DIN
DIN EN 18204:2025-07
En Vigor
2025-07-01
Algae and algae products - Determination of the phycocyanin content in
Arthrospira (Spirulina); German and English version prEN 18204:2025 /
Note: Date of issue 2025-06-20
DIN
DIN EN ISO 25086-1:2025-07
En Vigor
2025-07-01
Textiles - Determination of the snagging resistance of fabrics - Part 1:
Mace test method (ISO/DIS 25086-1:2025); German and English version prEN
ISO 25086-1:2025 / Note: Date of issue 2025-06-13
DIN
DIN EN ISO 10253:2025-07
En Vigor
2025-07-01
Water quality - Marine algal growth inhibition test with Skeletonema sp.
and Phaeodactylum tricornutum (ISO 10253:2024); German version EN ISO 10253:2024
DIN
DIN ISO 6426-2:2025-07
En Vigor
2025-07-01
Horological vocabulary - Part 2: Technical and commercial definitions
(ISO/DIS 6426-2:2025); Text in German and English / Note: Date of issue
2025-05-30*Intended as replacement for DIN 8236-5 (1987-01).
DIN
DIN 14464:2025-07
En Vigor
2025-07-01
Assembly with direct connection for sprinkler systems and extinguishing
systems with open nozzles - Requirements and testing / Note: Date of
issue 2025-05-30*Intended as replacement for DIN 14464 (2012-09).
DIN
DIN EN ISO 15548-1:2025-07
En Vigor
2025-07-01
Non-destructive testing - Equipment for eddy current examination - Part
1: Instrument characteristics and verification (ISO/DIS 15548-1:2025);
German and English version prEN ISO 15548-1:2025 / Note: Date of issue
2025-06-06*Intended as replacement for DIN EN ISO 15548-1 (2014-03).
DIN
DIN EN ISO/IEC 23894:2025-07
En Vigor
2025-07-01
Information technology - Artificial intelligence - Guidance on risk
management (ISO/IEC 23894:2023); German version EN ISO/IEC 23894:2024
DIN
DIN EN 12106:2025-07
En Vigor
2025-07-01
Plastics piping systems - Polyethylene (PE), crosslinked polyethylene
(PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the
resistance to internal pressure after application of squeeze-off; German
version EN 12106:2025
DIN
DIN EN ISO 4064-4:2025-07
En Vigor
2025-07-01
Water meters for cold potable water and hot water - Part 4:
Non-metrological requirements not covered in ISO 4064-1 (ISO
4064-4:2024); German version EN ISO 4064-4:2025 / Note: This standard is
part of the DVGW body of rules.
DIN
DIN EN 2002-001:2025-07
En Vigor
2025-07-01
Aerospace series - Metallic materials - Test methods - Part 001: Tensile
testing at ambient temperature; German version ASD-STAN prEN
2002-001:2025 / Note: Date of issue 2025-06-20*Intended as replacement
for DIN EN 2002-001 (2006-11), DIN EN 2002-001 Berichtigung 1 (2007-08).
DIN
DIN 77009-2:2025-07
En Vigor
2025-07-01
Personal and household services - Part 2: Service provision
DIN
DIN EN 18199:2025-07
En Vigor
2025-07-01
Leather - Essential requirements for leather traceability; German and
English version prEN 18199:2025 / Note: Date of issue 2025-06-13
DIN
DIN EN 16605:2025-06
En Vigor
2025-06-01
Space - Galileo Timing Receiver - Functional and Performance
Requirements and associated Tests; German version EN 16605:2024
DIN
DIN EN 13496:2025-06
En Vigor
2025-06-01
Thermal insulation products for building applications - Determination of
the mechanical properties of glass fibre meshes as reinforcement for
external thermal insulation composite kits with renders (ETIC kits);
German version EN 13496:2025
DIN
DIN EN 13806-1:2025-06
En Vigor
2025-06-01
Foodstuffs - Determination of trace elements - Part 1: Determination of
total mercury in foodstuffs by atomic absorption spectrometry (AAS) -
cold vapour technique after pressure digestion; German version EN 13806-1:2025
