Filtrar:
DIN
DIN EN 60317-37/A1:2025-09
En Vigor
2025-09-01
Specifications for particular types of winding wires - Part 37:
Polyesterimide enamelled round copper wire, class 180, with a bonding
layer (IEC 60317-37:2013/AMD1:2024); German version EN
60317-37:2014/A1:2024 / Note: Date of issue 2025-08-08*Intended as an
amendment to DIN EN 60317-37 (2014-10).
DIN
DIN ISO 18782:2025-10
En Vigor
2025-10-01
Textiles - Determination of dynamic hygroscopic heat generation (ISO 18782:2023)
DIN
DIN EN 13763-3:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
3: Determination of sensitiveness to impact; German and English version
prEN 13763-3:2021 / Note: Date of issue 2021-04-30
DIN
DIN EN ISO 17829:2025-12
En Vigor
2025-12-01
Solid biofuels - Determination of length and diameter of pellets (ISO
17829:2025); German version EN ISO 17829:2025
DIN
DIN ISO 6426-2:2025-07
En Vigor
2025-07-01
Horological vocabulary - Part 2: Technical and commercial definitions
(ISO/DIS 6426-2:2025); Text in German and English / Note: Date of issue
2025-05-30*Intended as replacement for DIN 8236-5 (1987-01).
DIN
DIN EN 4641-102:2025-09
En Vigor
2025-09-01
Aerospace series - Cables, optical 125 µm diameter cladding - Part 102:
Semi-loose 62,5 µm/125 µm GI fibre nominal 1,8 mm outside diameter -
Product standard; German and English version EN 4641-102:2025
DIN
DIN 55409-2:2025-11
En Vigor
2025-11-01
Packaging - Test method for determining opening forces for peelable
packagings - Part 2: Dimensionally stable packagings / Note: Date of
issue 2025-10-10*Intended as replacement for DIN 55409-2 (2013-10).
DIN
DIN EN ISO 8536-16:2025-10
En Vigor
2025-10-01
Infusion equipment for medical use - Part 16: Infusion sets for single
use with volumetric infusion controllers (ISO 8536-16:2025); German
version EN ISO 8536-16:2025
DIN
DIN 3975-1:2025-12
En Vigor
2025-12-01
Definitions and parameters on cylindrical worm gear pairs with
rectangular crossing shafts - Part 1: Worm and worm wheel
DIN
DIN EN 17984-2:2024-07
En Vigor
2025-12-01
Assistance dogs - Part 2: Dog lifetime welfare; German and English
version prEN 17984-2:2024 / Note: Date of issue 2024-06-07
DIN
DIN EN ISO 19085-4:2019-06
En Vigor
2025-12-01
Woodworking machines - Safety - Part 4: Vertical panel circular sawing
machines (ISO 19085-4:2018); German version EN ISO 19085-4:2018
DIN
DIN 8930-3:2025-08
En Vigor
2025-08-01
Refrigerating systems and heat pumps - Vocabulary - Part 3: Components, general
DIN
DIN ISO 16000-33:2025-06
En Vigor
2025-06-01
Indoor air - Part 33: Determination of phthalates with gas
chromatography/mass spectrometry (GC/MS) (ISO 16000-33:2024)
DIN
DIN CEN/TS 18101:2025-09
En Vigor
2025-09-01
Circular design of fishing gear and aquaculture equipment - Terms and
definitions; German version CEN/TS 18101:2024
DIN
DIN EN ISO 7040:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with
non-metallic insert) (ISO 7040:2025); German version EN ISO 7040:2025
DIN
DIN/TS 26059-2:2025-12
En Vigor
2025-12-01
Components for overfill protection devices for liquids hazardous to
aquatic environment - Part 2: Selection, installation and operation of
an overfill protection system
DIN
DIN EN 18262:2025-12
En Vigor
2025-12-01
Precast concrete products - Product specifications; German and English
version prEN 18262:2025 / Note: Date of issue 2025-11-14*Intended as
replacement for DIN EN 13369 (2025-06).
DIN
DIN
DIN 14464:2025-07
En Vigor
2025-07-01
Assembly with direct connection for sprinkler systems and extinguishing
systems with open nozzles - Requirements and testing / Note: Date of
issue 2025-05-30*Intended as replacement for DIN 14464 (2012-09).
DIN
DIN EN ISO 15548-1:2025-07
En Vigor
2025-07-01
Non-destructive testing - Equipment for eddy current examination - Part
1: Instrument characteristics and verification (ISO/DIS 15548-1:2025);
German and English version prEN ISO 15548-1:2025 / Note: Date of issue
2025-06-06*Intended as replacement for DIN EN ISO 15548-1 (2014-03).
DIN
DIN EN ISO 16610-21:2025-08
En Vigor
2025-08-01
Geometrical product specifications (GPS) - Filtration - Part 21: Linear
profile filters: Gaussian filters (ISO 16610-21:2025); German version EN
ISO 16610-21:2025
DIN
DIN
DIN EN 319421:2025-11
En Vigor
2025-11-01
Electronic Signatures and Infrastructures (ESI) - Policy and Security
Requirements for Trust Service Providers issuing Time-Stamps
(Endorsement of the English version EN 319 421 V1.2.1 (2023-05) as
German standard) / Note: DIN ETS standards collection*Endorsement notice
DIN
DIN 6900-5:2025-12
En Vigor
2025-12-01
Fasteners - Screw and washer assemblies with coarse thread - Part 5:
With captive conical spring washer
DIN
DIN EN ISO 32543-1:2025-07
En Vigor
2025-12-01
Non-destructive testing - Characteristics of focal spots in industrial
X-ray systems - Part 1: Pinhole camera radiographic method (ISO
32543-1:2024); German and English version prEN ISO 32543-1:2025 / Note:
Date of issue 2025-06-06
DIN
DIN EN ISO 19085-11:2020-08
En Vigor
2025-12-01
Woodworking machines - Safety - Part 11: Combined machines (ISO
19085-11:2020); German version EN ISO 19085-11:2020
DIN
DIN EN 868-3:2025-09
En Vigor
2025-09-01
Packaging for terminally sterilized medical devices - Part 3: Paper for
use in the manufacture of paper bags (specified in EN 868-4) and in the
manufacture of pouches and reels (specified in EN 868-5) - Requirements
and test methods; German version EN 868-3:2025
DIN
DIN EN ISO/IEC 23894:2025-07
En Vigor
2025-07-01
Information technology - Artificial intelligence - Guidance on risk
management (ISO/IEC 23894:2023); German version EN ISO/IEC 23894:2024
DIN
DIN EN ISO 16047:2025-08
En Vigor
2025-08-01
Fasteners - Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012);
German version EN ISO 16047:2005 + A1:2012
DIN
DIN EN 509/A1:2025-08
En Vigor
2025-08-01
Decorative fuel-effect gas appliances; German and English version EN
509:2024/prA1:2025 / Note: Date of issue 2025-07-04*Intended as an
amendment to DIN EN 509 (2025-02).
DIN
DIN EN IEC 61554:2025-12
En Vigor
2025-12-01
Panel mounted equipment - Electrical measuring instruments - Dimensions
for panel mounting (IEC 61554:2025); German version EN IEC 61554:2025 /
Note: DIN IEC 61554 (2002-08) remains valid alongside this standard
until 2028-07-31.
DIN
DIN CEN/TS 19102/NA:2025-08
En Vigor
2025-12-01
National Annex - Nationally determined parameters - CEN/TS 19102 / Note:
Date of issue 2025-06-27
DIN
DIN EN ISO 7899-3:2025-12
En Vigor
2025-12-01
Water quality - Enumeration of intestinal enterococci - Part 3: Most
probable number method (ISO 7899-3:2025); German version EN ISO 7899-3:2025
DIN
DIN EN ISO 19085-5:2025-09
En Vigor
2025-09-01
Woodworking machines - Safety - Part 5: Dimension saws (ISO
19085-5:2024); German version EN ISO 19085-5:2024
DIN
DIN EN 12106:2025-07
En Vigor
2025-07-01
Plastics piping systems - Polyethylene (PE), crosslinked polyethylene
(PE-X) and unplasticized polyamide (PA-U) pipes - Test method for the
resistance to internal pressure after application of squeeze-off; German
version EN 12106:2025
DIN
DIN EN 6104:2026-03
En Vigor
2026-03-01
Aerospace series - Rivet, solid, in aluminium or aluminium alloy - Inch
series - Technical specification; German version ASD-STAN prEN 6104:2025
/ Note: Date of issue 2026-01-30
DIN
DIN EN ISO 18527-2:2026-03
En Vigor
2026-03-01
Eye and face protection for sports use - Part 2: Requirements for eye
protectors for squash and eye protectors for racquetball and squash 57
(ISO 18527-2:2021); German version EN ISO 18527-2:2021
DIN
DIN
DIN ISO 15592-2:2026-03
En Vigor
2026-03-01
Fine-cut tobacco and smoking articles made from it - Methods of
sampling, conditioning and analysis - Part 2: Atmosphere for
conditioning and testing (ISO 15592-2:2025); Text in German and English
/ Note: Date of issue 2026-02-06*Intended as replacement for DIN ISO
15592-2 (2005-05).
DIN
