145314 Resultados disponibles

Filtrar:

(110246)
(35068)
(0)
DIN

DIN 7164:2017-03

En Vigor
2017-03-01
Geometrical product specifications (GPS) - Workshop plug gauges and spherical plug gauges for inside diameters with tolerance class according to DIN EN ISO 286-1 and DIN EN ISO 286-2 from 1 mm to 500 mm nominal size - Deviations and tolerances for gauges
DIN

DIN 4000-174:2014-02

En Vigor
2014-02-01
Tabular layouts of properties - Part 174: Inserts for reaming
DIN

DIN 73451:2011-11

En Vigor
2011-11-01
Clutch facings - Dimensions and tolerances
DIN

DIN 3280-1:2017-11

En Vigor
2017-11-01
Valves for domestic water supply PN 10 - Metallic tapered unions - Part 1: Design
DIN

DIN 18871-1:2018-11

En Vigor
2018-11-01
Equipment for commercial kitchens - Thermal equipment - Part 1: Warming cupboards; requirements and testing
DIN

DIN 86019:2006-02

En Vigor
2006-02-01
Seamless tubes made of CuNi10Fe1,6Mn for pipes - Dimensions for standard tubes and precision tubes
DIN

DIN 4000-132:2011-09

En Vigor
2011-09-01
Tabular layouts of properties - Part 132: Super abrasive products with bore
DIN

DIN 86001:2010-09

En Vigor
2010-09-01
Pipelines on ships - Pressure ratings, pressure tests
DIN

DIN 50600:2017-10

En Vigor
2017-10-01
Testing of metallic materials - Metallographic micrographs - Picture scales
DIN

DIN 23330:2015-03

En Vigor
2015-03-01
Safety marking for mines / Note: DIN 23330 (2001-11) remains valid alongside this standard until 2015-09-01.
DIN

DIN 8584-1:2003-09

En Vigor
2003-09-01
Manufacturing processes forming under combination of tensile and compressive conditions - Part 1: General; Classification, subdivision, terms and definitions
DIN

DIN 25043-4:2012-02

En Vigor
2012-02-01
Railway applications - Measuring of new railway vehicles - Part 4: Measurement and calculation of static loads effective at the interface between body and running gear; with CD-ROM / Note: Under certain conditions, DIN 25043-1 (2012-02) remains valid alongside this standard until 2016-02-01.
DIN

DIN 58280:2016-03

En Vigor
2016-03-01
Medical instruments - Iris scissors without carbide inserts
DIN

DIN 7975:2016-04

En Vigor
2016-04-01
Tapping screw connections - Guideline values for core hole diameters and use
DIN

DIN 55520 Berichtigung 1:2018-11

En Vigor
2018-11-01
Position areas for shipping packages, derived from the position areas 800 mm × 1200 mm and 1000 mm × 1200 mm; Corrigendum 1
DIN

DIN 38406-3:2002-03

En Vigor
2002-03-01
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric method (E 3)
DIN

DIN 85004-4:2002-02

En Vigor
2002-02-01
Pipelines made of copper-nickel-alloys - Part 4: Technical specification for tubes
DIN

DIN 6528:2002-01

En Vigor
2002-01-01
Solid hardmetal end mills with continuous parallel shank - Dimensions
DIN

DIN 28030-2:2013-09

En Vigor
2013-09-01
Flange joints for process vessels - Part 2: Limit deviations for flanges
DIN

DIN 620-6:2004-06

En Vigor
2004-06-01
Rolling bearings - Rolling bearing tolerances - Part 6: Chamfer dimension limits
DIN

DIN 27202-6:2026-02

En Vigor
2026-02-01
State of railway vehicles - Superstructure and special equipment of vehicles - Part 6: Safety equipment for load and transport protection / Note: Date of issue 2026-01-23*Intended as replacement for DIN 27202-6 (2015-08).
DIN

DIN 4301:2009-06

En Vigor
2009-06-01
Ferrous and non-ferrous metallurgical slag for civil engineering and building construction use
DIN

DIN 85003-8:2012-10

En Vigor
2012-10-01
Technical specifications for valves for shipboard use - Part 8: Ball valves
DIN

DIN 18130-2:2015-08

En Vigor
2015-08-01
Soil, investigation and testing - Determination of the coefficient of water permeability - Part 2: Field tests
DIN

DIN 8078:2008-09

En Vigor
2008-09-01
Polypropylene (PP) pipes - PP-H, PP-B, PP-R, PP-RCT - General quality requirements and testing
DIN

DIN 19404:2018-06

En Vigor
2018-06-01
Dentistry - Designations for the parts and dimensions of an implant body / Note: To be replaced by DIN EN ISO 24466 (2022-03).
DIN

DIN 12242:2023-03

En Vigor
2023-03-01
Laboratory glassware - Interchangeable conical ground joints, dimensions, tolerances
DIN

DIN 1239:2018-04

En Vigor
2018-04-01
Coverings for wells, spring water chambers and other water supply construction - Principles for construction / Note: This standard is part of the DVGW body of rules.
DIN

DIN 86341:2021-04

En Vigor
2021-04-01
Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10
DIN

DIN 50989-6:2024-02

En Vigor
2024-02-01
Ellipsometry - Part 6: Effective Materials model; Text in German and English
DIN

DIN 12245:2023-11

En Vigor
2023-11-01
Laboratory glassware - Conical sockets, taper 1 : 10, blank or roughly ground - Dimensions, tolerances
DIN

DIN 18349:2023-09

En Vigor
2023-09-01
German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Repair work on concrete structures
DIN

DIN 96298-3:2017-10

En Vigor
2017-10-01
Medical instruments - Terms, measuring methods and tests - Part 3: Tests
DIN

DIN 91489:2026-02

En Vigor
2026-02-01
Requirements for fire limitation blankets for use with electric vehicles / Note: Date of issue 2026-01-23*Intended as replacement for DIN SPEC 91489 (2024-11).
DIN

DIN 6075-1:2021-06

En Vigor
2021-06-01
Means of packaging - Bottles - Part 1: Vichy-shape 1
DIN

DIN 54540-9:2007-10

En Vigor
2007-10-01
Testing of hygiene products - Tissue and nonwoven - Part 9: Determination of moisture content
DIN

DIN 96105:2023-03

En Vigor
2023-03-01
Medical instruments - Surgical scissors, curved on flat, type Tönnis
DIN

DIN 1910-3:2026-02

En Vigor
2026-02-01
Welding and allied processes - Plastic welding - Part 3: Processes for welding of thermoplastics
DIN

DIN 4873:2024-03

En Vigor
2024-03-01
Non-destructive testing - Certification of NDT personnel in Civil Engineering (NDT-CE)
DIN

DIN 6878-1:2013-01

En Vigor
2013-01-01
Digital archiving in medical radiology - Part 1: General requirements for the archiving of images