Filtrar:
DIN
DIN EN ISO 22007-1:2024-07
En Vigor
2024-07-01
Plastics - Determination of thermal conductivity and thermal diffusivity
- Part 1: General principles (ISO 22007-1:2024); German version EN ISO 22007-1:2024
DIN
DIN EN ISO 17777:2016-11
En Vigor
2016-11-01
Welding consumables - Covered electrodes for manual metal arc welding of
copper and copper alloys - Classification (ISO 17777:2016); German
version EN ISO 17777:2016
DIN
DIN EN 61076-4:1996-07
En Vigor
1996-07-01
Connectors with assessed quality, for use in d.c., low frequency
analogue and in digital high speed data applications - Part 4: Generic
specification (IEC 61076-4:1995); German version EN 61076-4:1996
DIN
DIN EN ISO 18422:2017-12
En Vigor
2017-12-01
Ships and marine technology - Inland navigation vessels - Plate with
instructions for rescue, resuscitation and first aid for drowning
persons (ISO 18422:2014); German version EN ISO 18422:2017
DIN
DIN 65314:2024-03
En Vigor
2024-03-01
Aerospace series - Countersunk head bolts, close tolerance, with
internal offset cruciform ribbed drive and MJ thread, short thread
length, steel - Nominal tensile strength 1 100 MPa, for temperatures up
to 235 °C; Text in German and English
DIN
DIN EN ISO 21904-4:2020-06
En Vigor
2020-06-01
Health and safety in welding and allied processes - Equipment for
capture and separation of welding fume - Part 4: Determination of the
minimum air volume flow rate of capture devices (ISO 21904-4:2020);
German version EN ISO 21904-4:2020
DIN
DIN EN ISO 6803:2017-07
En Vigor
2017-07-01
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure
impulse test without flexing (ISO 6803:2017); German version EN ISO 6803:2017
DIN
DIN EN 16830:2023-07
En Vigor
2023-07-01
Safety and control devices for burners and appliances burning gaseous or
liquid fuels - Control functions in electronic systems - Temperature
Control function; German version EN 16830:2022
DIN
DIN EN ISO 10218-1:2012-01
En Vigor
2012-01-01
Robots and robotic devices - Safety requirements for industrial robots -
Part 1: Robots (ISO 10218-1:2011); German version EN ISO 10218-1:2011 /
Note: To be replaced by DIN EN ISO 10218-1 (2020-04), DIN EN ISO 10218-1 (2021-09).
DIN
DIN ISO 92:1980-05
En Vigor
1980-05-01
Textile machinery and accessories; spinning machinery, definition of
side (left or right)
DIN
DIN EN 1804-1:2021-07
En Vigor
2021-07-01
Machines for underground mines - Safety requirements for hydraulic
powered roof supports - Part 1: Support units and general requirements;
German version EN 1804-1:2020
DIN
DIN EN ISO 18674-3:2020-06
En Vigor
2020-06-01
Geotechnical investigation and testing Geotechnical monitoring by
field instrumentation Part 3: Measurement of displacements across a
line: Inclinometers (ISO 18674-3:2017 + Amd 1:2020); German version EN
ISO 18674-3:2017 + A1:2020
DIN
DIN 51068:2008-11
En Vigor
2008-11-01
Testing of ceramic raw and basic materials - Determination of resistance
to thermal shock - Water quenching method for refractory bricks
DIN
DIN EN ISO 29466:2023-02
En Vigor
2023-02-01
Thermal insulating products for building applications - Determination of
thickness (ISO 29466:2022); German version EN ISO 29466:2022
DIN
DIN 18946:2024-03
En Vigor
2024-03-01
Earth masonry mortar - Requirements, test and labelling / Note: To be
amended by DIN 18946/A1 (2026-01).
DIN
DIN EN ISO 19901-4:2025-05
En Vigor
2025-05-01
Oil and gas industries including lower carbon energy - Specific
requirements for offshore structures - Part 4: Geotechnical design
considerations (ISO 19901-4:2025); English version EN ISO 19901-4:2025
DIN
DIN EN 10034:1994-03
En Vigor
1994-03-01
Structural steel I and H sections; tolerances on shape and dimensions;
German version EN 10034:1993
DIN
DIN 51457:2024-07
En Vigor
2024-07-01
Testing of ceramic raw materials and ceramic materials - Direct
determination of mass fractions of trace impurities in powders, granules
and lumps of graphite by optical emission spectroscopy by inductively
coupled plasma (ICP-OES) and by electrothermal vaporization (ETV) under
the action of a halogenated reaction gas (modifier)
DIN
DIN 51834-5:2024-06
En Vigor
2024-06-01
Testing of lubricants - Tribological test in the translatory oscillation
apparatus - Part 5: Quantification of the friction-induced noise
development of brake fluids in EPDM-metal contacts
DIN
DIN EN 61375-3-4/A11:2018-03
En Vigor
2018-03-01
Electronic railway equipment - Train communication network (TCN) - Part
3-4: Ethernet Consist Network (ECN); German version EN
61375-3-4:2014/A11:2017 / Note: DIN EN 61375-3-4 (2015-10) remains valid
alongside this standard until 2020-02-01.
DIN
DIN EN ISO 23146:2026-02
En Vigor
2026-02-01
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test
methods for fracture toughness of monolithic ceramics - Single-edge
V-notch beam (SEVNB) method (ISO/DIS 23146:2025); German and English
version prEN ISO 23146:2025 / Note: Date of issue 2026-01-09*Intended as
replacement for DIN EN ISO 23146 (2016-11).
DIN
DIN EN 378-5:2025-07
En Vigor
2025-07-01
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 5: Safety classification and information about
refrigerants; German and English version prEN 378-5:2025 / Note: Date of
issue 2025-05-30*Intended as replacement for DIN EN 378-1 (2021-06).
DIN
DIN EN ISO 21611:2025-08
En Vigor
2025-08-01
Dentistry - Vocabulary for Source Conclusion for Human Identification by
Dental Evidence (ISO/DIS 21611:2025); German and English version prEN
ISO 21611:2025 / Note: Date of issue 2025-07-18
DIN
DIN EN IEC 62148-17:2024-10
En Vigor
2024-10-01
Fibre optic active components and devices - Package and interface
standards - Part 17: Transmitter and receiver components with dual
coaxial RF connectors (IEC 62148-17:2023); German version EN IEC
62148-17:2023 / Note: DIN EN 62148-17 (2014-09) remains valid alongside
this standard until 2026-10-25.
DIN
DIN EN 14541-1:2023-05
En Vigor
2023-05-01
Plastics pipes and fittings - Utilisation of thermoplastics recyclates -
Part 1: Vocabulary; German version EN 14541-1:2022 / Note: To be
replaced by DIN EN 14541-1 (2026-03).
DIN
DIN EN 13832-3:2025-10
En Vigor
2025-10-01
Footwear protecting against chemicals - Part 3: Requirements for
prolonged contact with chemicals; German and English version prEN
13832-3:2025 / Note: Date of issue 2025-08-29*Intended as replacement
for DIN EN 13832-3 (2019-04).
DIN
DIN 58381:2021-06
En Vigor
2021-06-01
Optics and photonics - Operating elements on telescopes, binoculars and
telescopic sights
DIN
DIN EN ISO 10079-4:2022-06
En Vigor
2022-06-01
Medical suction equipment - Part 4: General requirements (ISO
10079-4:2021); German version EN ISO 10079-4:2021
DIN
DIN EN 1993-1-2/A1:2026-05
En Vigor
2026-05-01
Eurocode 3 - Design of steel structures - Part 1-2: Structural fire
design; German and English version EN 1993-1-2:2024/prA1:2026 / Note:
Date of issue 2026-04-10*Intended as an amendment to DIN EN 1993-1-2 (2022-03).
DIN
DIN IEC/TR 60919-3:2023-05
En Vigor
2023-05-01
Performance of high-voltage direct current (HVDC) systems with
line-commutated converters - Part 3: Dynamic conditions (IEC TR
60919-3:2009 + A1:2016 + A2:2021)
DIN
DIN EN 10219-3:2020-11
En Vigor
2020-11-01
Cold formed welded steel structural hollow sections - Part 3: Technical
delivery conditions for high strength and weather resistant steels;
German version EN 10219-3:2020 / Note: To be replaced by DIN EN 10219-1 (2026-03).
DIN
DIN EN 15129:2018-07
En Vigor
2018-07-01
Anti-seismic devices; German version EN 15129:2018 / Note: To be
replaced by DIN EN 15129-1 (2024-01), DIN EN 15129-6 (2021-12, t).
DIN
DIN EN 10178:2024-10
En Vigor
2024-10-01
Steels - Determination of niobium - Spectrophotometric method; German
version EN 10178:2024
DIN
DIN EN ISO 11011:2015-08
En Vigor
2015-08-01
Compressed air - Energy efficiency - Assessment (ISO 11011:2013); German
version EN ISO 11011:2015
DIN
DIN 3906:2026-03
En Vigor
2026-03-01
Non-soldering compression fittings with cutting ring - T-studs with
taper-threaded stud end; inactive for new design
DIN
DIN EN 455-5:2025-10
En Vigor
2025-10-01
Medical gloves for single use - Part 5: Extractable chemical residues;
German version EN 455-5:2025
DIN
DIN 16833:2024-02
En Vigor
2024-02-01
Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type
I and PE-RT Type II - General quality requirements, testing; Text in
German and English
DIN
DIN EN ISO 6941:2004-05
En Vigor
2004-05-01
Textile fabrics - Burning behaviour - Measurement of flame spread
properties of vertically oriented specimens (ISO 6941:2003); German
version EN ISO 6941:2003 / Note: To be replaced by DIN EN ISO 6941 (2025-06).
DIN
DIN EN 6059-401:2022-10
En Vigor
2022-10-01
Aerospace series - Electrical cables, installation - Protection sleeves
- Test methods - Part 401: Expansion range; German and English version
EN 6059-401:2022
DIN
DIN CEN/TS 17688-2:2022-06
En Vigor
2022-06-01
Molecular in vitro diagnostic examinations - Specifications for
pre-examination processes for Fine Needle Aspirates (FNAs) - Part 2:
Isolated proteins; German version CEN/TS 17688-2:2021










