Filtrar:
DIN
DIN EN 2002-001:2006-11
Anulada
2026-03-01
Aerospace series - Metallic materials - Test methods - Part 1: Tensile
testing at ambient temperature; German and English version EN 2002-001:2005
DIN
DIN EN 15416-4:2024-06
Anulada
2026-03-01
Adhesives for load bearing timber structures other than phenolic and
aminoplastic - Test methods - Part 4: Determination of open assembly
time under referenced conditions; German and English version prEN
15416-4:2024 / Note: Date of issue 2024-05-03
DIN
DIN EN 14388:2021-12
Anulada
2026-03-01
Road traffic noise reducing devices - Characteristics; German and
English version prEN 14388:2021 / Note: Date of issue 2021-11-19
DIN
DIN
DIN EN 12436:2002-04
Anulada
2026-01-01
Adhesives for load-bearing timber structures - Casein adhesives -
Classification and performance requirements; German version EN 12436:2001
DIN
DIN EN 62565-3-1:2014-11
Anulada
2026-01-01
Nanomanufacturing - Material specifications - Part 3-1: Graphene - Blank
detail specification for electrotechnical applications (IEC
113/217/CD:2014) / Note: Date of issue 2014-10-17
DIN
DIN 6701-2:2015-12
Anulada
2026-01-01
Adhesive bonding of railway vehicles and parts - Part 2: Qualification
of manufacturer of adhesive bonded materials
DIN
DIN EN 17257-1:2018-06
Anulada
2026-01-01
Glass in building - Acid etched glass - Part 1: Definitions and
descriptions; German and English version prEN 17257-1:2018 / Note: Date
of issue 2018-05-18
DIN
DIN EN 14179-2:2017-12
Anulada
2026-01-01
Glass in building - Heat soaked thermally toughened soda lime silicate
safety glass - Part 2: Product standard; German and English version prEN
14179-2:2017 / Note: Date of issue 2017-11-03
DIN
DIN EN ISO 11465:2024-09
Anulada
2026-03-01
Sludge, treated biowaste, soil and waste - Determination of dry residue
or water content and calculation of the dry matter fraction on a mass
basis (ISO/DIS 11465:2024); German and English version prEN ISO
11465:2024 / Note: Date of issue 2024-08-16
DIN
DIN 3903:2024-02
Anulada
2026-03-01
Non soldering compression fittings with cutting ring - Elbow stud with
taper threaded stud end (not for new design) / Note: Date of issue 2024-01-12
DIN
DIN/TS 44808-1:2022-03
Anulada
2026-03-01
Chronometric dating methods in geosciences and archaeology by
luminescence - Part 1: Reporting of equivalent doses and dating results
DIN
DIN 45680:2020-06
Anulada
2026-01-01
Measurement and assessment of low-frequency noise immissions / Note:
Date of issue 2020-05-22
DIN
DIN V 65900-17:2001-05
Anulada
2026-01-01
Aerospace series - O-ring grooves - Design criteria for O-ring grooves,
basic calculations (AECMA Technical Report TR 4271:2000)
DIN
DIN CEN/TS 17380:2019-12;DIN SPEC 70045:2019-12
Anulada
2025-12-01
Intelligent transport systems - Urban-ITS - 'Controlled Zone' management
for UVARs using C-ITS; English version CEN/TS 17380:2019
DIN
DIN EN ISO 6506-2:2023-11
Anulada
2026-02-01
Metallic materials - Brinell hardness test - Part 2: Verification and
calibration of testing machines (ISO/DIS 6506-2:2023); German and
English version prEN ISO 6506-2:2023 / Note: Date of issue 2023-10-20
DIN
DIN 51502-5:2024-12
Anulada
2026-03-01
Lubricants and related materials - Classification of lubricants - Part
5: Processing media / Note: Date of issue 2024-11-15
DIN
DIN EN 18087:2024-07
Anulada
2026-03-01
Devices for in situ generation of biocides - Chlorine dioxide generated
from sodium chlorite by acidification or oxidation; German and English
version prEN 18087:2024 / Note: Date of issue 2024-06-14
DIN
DIN EN ISO 6506-3:2023-11
Anulada
2026-02-01
Metallic materials - Brinell hardness test - Part 3: Calibration of
reference blocks (ISO/DIS 6506-3:2023); German and English version prEN
ISO 6506-3:2023 / Note: Date of issue 2023-10-13
DIN
DIN EN ISO 23908:2013-10
Anulada
2026-01-01
Sharps injury protection - Requirements and test methods - Sharps
protection features for single-use hypodermic needles, introducers for
catheters and needles used for blood sampling (ISO 23908:2011); German
version EN ISO 23908:2013
DIN
DIN EN 6049-009:2016-08
Anulada
2026-01-01
Aerospace series - Electrical cables, installation - Protection sleeve
in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve,
flexible, post installation, operating temperature from -55 °C to 260 °C
- Product standard; German and English version EN 6049-009:2016
DIN
DIN 4510-1:1983-06
Anulada
2026-01-01
Picture sizes and printing masks for film No. 110, film No. 126 and film
No. 135 for still photography
DIN
DIN 30911-0:1990-10
Anulada
2025-12-01
Sintered metal materials; sint-testing procedures; part 0: explanatory
notes for SPN
DIN
DIN EN 61094-2/A1:2023-02
Anulada
2026-01-01
Electroacoustics - Measurement microphones - Part 2: Primary method for
pressure calibration of laboratory standard microphones by the
reciprocity technique (IEC 61094-2:2009/AMD1:2022); German and English
version EN 61094-2:2009/A1:2022 / Note: Date of issue 2023-01-13
DIN
DIN EN ISO 3377-2:2016-07
Anulada
2026-01-01
Leather - Physical and mechanical tests - Determination of tear load -
Part 2: Double edge tear (ISO 3377-2:2016); German version EN ISO 3377-2:2016
DIN
DIN EN ISO 14555:2024-08
Anulada
2026-01-01
Welding - Arc stud welding of metallic materials (ISO/DIS 14555:2024);
German and English version prEN ISO 14555:2024 / Note: Date of issue 2024-06-28
DIN
DIN V 65900-14:1998-09
Anulada
2026-01-01
Aerospace series - Design and construction of pipeline for fluids in
liquid or Gaseous condition - Rigid lines, installation (AECMA Technical
Report TR 2674:1997)
DIN
DIN EN ISO 8739:1998-03
Anulada
2026-03-01
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997);
German version EN ISO 8739:1997
DIN
DIN 18273-101:2024-03
Anulada
2025-12-01
Building hardware - Mechanical and mechatronic lever handle sets for
fire resistance doorsets, for fire resistance and smoke control doorsets
or for smoke control doorsets - Part 101: Conformity assessment / Note:
Date of issue 2024-02-09
DIN
DIN EN 16616:2022-10
Anulada
2026-03-01
Chemical disinfectants and antiseptics - Chemical-thermal textile
disinfection - Test method and requirements (phase 2, step 2); German
version EN 16616:2022
DIN
DIN 49440-6:1989-12
Anulada
2025-09-01
Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250
V a.c., for surface mounting and as portable type; dimensions
DIN
DIN 58960-4:1991-01
Anulada
2025-11-01
Photometer for analytical tests; requirements for the description of
technical data for the user
DIN
DIN EN ISO 16610-21:2013-06
Anulada
2025-08-01
Geometrical product specifications (GPS) - Filtration - Part 21: Linear
profile filters: Gaussian filters (ISO 16610-21:2011); German version EN
ISO 16610-21:2012
DIN
DIN
DIN 18531-3:2017-07
Anulada
2025-08-01
Waterproofing of roofs, balconies and walkways - Part 3: Non-utilized
and utilized roofs - Selection, execution and detailing / Note: Applies
in conjunction with DIN 18531-1 (2017-07), DIN 18531-2 (2017-07), DIN
18531-4 (2017-07).
DIN
DIN 69909-4:2015-11
Anulada
2025-11-01
Multi-Project Management - Management of project portfolios, programmes
and projects - Part 4: Roles
DIN
DIN EN 50719:2023-10
Anulada
2025-11-01
Connecting terminal flags for bushings from 250 A to 4 000 A for
insulating liquid filled transformers; German and English version prEN
50719:2023 / Note: Date of issue 2023-09-08
DIN
DIN EN 1170-8:2009-05
Anulada
2025-09-01
Test method for glass-fibre reinforced cement - Part 8: Cyclic
weathering type test; German version EN 1170-8:2008
DIN
DIN 55403:2024-12
Anulada
2025-09-01
Packaging test - Test method for packaging films - Determination of the
tendency to curl / Note: Date of issue 2024-11-08
DIN
DIN 14461-5:2008-02
Anulada
2025-11-01
Delivery valve installations for firefighting purposes - Part 5: Tap PN
16 connected with firefigthing pipes
