Filtrar:
DIN
DIN CEN/TS 14631:2005-06
En Vigor
2005-06-01
Postal services - Automatic identification of receptacles and containers
- Receptacle asset numbering; German version CEN/TS 14631:2005
DIN
DIN
DIN EN 300392-3-3:2018-04
En Vigor
2018-04-01
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3:
Interworking at the Inter-System Interface (ISI) - Sub-part 3:
Additional Network Feature Group Call (ANF-ISIGC) (Endorsement of the
English version EN 300 392-3-3 V1.4.1 (2017-12) as German standard) /
Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN 13108-2:2016-12
En Vigor
2016-12-01
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete
for Very Thin Layers (BBTM); German version EN 13108-2:2016 / Note:
Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN
DIN EN 4612-008:2019-12
En Vigor
2019-12-01
Aerospace series - Cables, electrical, for general purpose, single and
multicore assembly - XLETFE Family - Jacketed or screened and jacketed -
Part 008: Silver plated copper - Operating temperatures, between -65 °C
and 150 °C - Single extruded wall for open applications, with jacket and
screen (braid) - UV laser printable - Product standard; German and
English version EN 4612-008:2019
DIN
DIN 86016:2021-08
En Vigor
2021-08-01
Screwed steel pipe clamps with inlay for marine pipelines - For pipe
outer diameters from 15 mm to 219 mm
DIN
DIN
DIN 51350-5:2015-03
En Vigor
2015-03-01
Testing of lubricants - Testing in the four-ball tester - Part 5:
Determination of wearing characteristics for consistent lubricants
DIN
DIN EN 16340:2014-10
En Vigor
2014-10-01
Safety and control devices for burners and appliances burning gaseous or
liquid fuels - Combustion product sensing devices; German version EN 16340:2014
DIN
DIN 55626-25:2007-07
En Vigor
2007-07-01
Extenders and pigments for paper and board - Specifications and methods
of test - Part 25: Silica gel
DIN
DIN EN 140101-806:2014-09
En Vigor
2014-09-01
Detail Specification: Fixed low power film resistors - Metal film
resistors on high grade ceramic, conformal coated or molded, axial or
preformed leads; German version 140101-806:2008 + A1:2013 / Note: DIN EN
140101-806 (2008-08) and DIN EN 140101-806 Berichtigung 1 (2010-01)
remain valid alongside this standard until 2016-10-14.
DIN
DIN
DIN 6868-5:2020-05
En Vigor
2020-05-01
Image quality assurance in diagnostic X-ray departments - Part 5:
Constancy testing of dental radiographic equipment
DIN
DIN
DIN 3230-5:2014-11
En Vigor
2014-11-01
Technical conditions of delivery of valves - Valves for gas
installations and gas pipelines - Part 5: Requirements and tests / Note:
To be replaced by DIN 3230-5 (2026-02).
DIN
DIN EN 13022-2:2014-08
En Vigor
2014-08-01
Glass in building - Structural sealant glazing - Part 2: Assembly rules;
German version EN 13022-2:2014
DIN
DIN 847:2020-11
En Vigor
2020-11-01
Double equal-angle milling cutters - Dimensions and technical delivery conditions
DIN
DIN 11865:2020-07
En Vigor
2020-07-01
Stainless steel components for aseptic applications in the chemical and
the pharmaceutical industries - Tees, elbows and reducers / Note: To be
replaced by DIN 11865 (2026-02).
DIN
DIN 19294-3:2020-08
En Vigor
2020-08-01
Devices for the disinfection of water using ultraviolet radiation - Part
3: Reference radiometers for devices equipped with UV low pressure lamps
- Requirements and testing / Note: This standard is part of the DVGW
body of rules.
DIN
DIN EN 1080:2023-02
En Vigor
2023-02-01
Impact protection helmets for young children; German and English version
prEN 1080:2023 / Note: Date of issue 2023-01-20*Intended as replacement
for DIN EN 1080 (2013-05).
DIN
DIN EN 12255-12:2022-03
En Vigor
2022-03-01
Wastewater treatment plants - Part 12: Control and automation; German
and English version prEN 12255-12:2022 / Note: Date of issue
2022-02-18*Intended as replacement for DIN EN 12255-12 (2003-12).
DIN
DIN EN 14782:2015-09
En Vigor
2015-09-01
Self-supporting metal sheet for roofing, external cladding and internal
lining - Product specification and requirements; German and English
version prEN 14782:2015 / Note: Date of issue 2015-08-21*Intended as
replacement for DIN EN 14782 (2006-03).
DIN
DIN 58950-2:2021-06
En Vigor
2021-06-01
Sterilization - Steam sterilizers for pharmaceutical products - Part 2:
Technical requirements; Text in German and English / Note: DIN 58950-2
(2011-01) remains valid alongside this standard until 2022-06-01.
DIN
DIN 87151:2015-01
En Vigor
2015-01-01
Grey cast-iron coarse filters - DN 40 to DN 200, nominal pressure PN 2,5
- Compilation and dimensions
DIN
DIN EN 13383-2:2021-06
En Vigor
2021-06-01
Armourstone - Part 2: Complementary information and test methods; German
and English version prEN 13383-2:2021 / Note: Date of issue
2021-05-21*Intended as replacement for DIN EN 13383-2 (2019-12).
DIN
DIN 58959-2:2021-09
En Vigor
2021-09-01
Medical microbiology - Quality management in medical microbiology - Part
2: Requirements for sample collection, transport and acceptance of specimens
DIN
DIN
DIN 54180-1:2015-01
En Vigor
2015-01-01
Non-destructive testing - Shearography - Part 1: General principles
DIN
DIN 4213:2015-10
En Vigor
2015-10-01
Application in structures of prefabricated components of lightweight
aggregate concrete with open structure with structural or non-structural
reinforcement / Note: To be amended by DIN 4213/A1 (2021-10).
DIN
DIN 4930:2016-10
En Vigor
2016-10-01
Pipes for use in freezing shaft sinking - Dimensions and technical
delivery conditions
DIN
DIN
DIN 8541-2:2021-08
En Vigor
2021-08-01
Hoses for welding, cutting and allied processes - Part 2: Hoses with
coatings for fuel gas, oxygen and other non combustible gases / Note:
DIN 8541-2 (1987-12) remains valid alongside this standard until 2022-01-31.
DIN
DIN 65268:2020-08
En Vigor
2020-08-01
Aerospace series - Hexagon bolts, with MJ thread, short thread, titanium
alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C
DIN
DIN 28152-1:2021-09
En Vigor
2021-09-01
Clamps for glass lined vessels - Part 1: Dimensions, assignment
DIN
DIN EN 13523-4:2014-10
En Vigor
2014-10-01
Coil coated metals - Test methods - Part 4: Pencil hardness; German
version EN 13523-4:2014
DIN
DIN 51191:2015-01
En Vigor
2015-01-01
Vitreous and porcelain enamels - Sliding friction wear test using an
abrasion wheel
DIN
DIN 18542:2020-04
En Vigor
2020-04-01
Impregnated sealing tapes made of cellular plastics for sealing of
outside wall joints - Requirements and testing
DIN
DIN
DIN 6650-5:2014-12
En Vigor
2014-12-01
Dispense systems for draught beverages - Part 5: Safety, hygienic and
application-technical requirements and testing of ready-for-use dispense
systems for draught beverages, component assemblies and components
DIN
DIN
DIN 19631:2025-04
En Vigor
2025-04-01
Leaching of construction products - Percolation method for the
examination of the leaching behaviour of materials injected into the
soil / Note: Date of issue 2025-03-14*Intended as replacement for DIN
19631 (2016-07).
DIN
DIN 51769-12:2020-03
En Vigor
2020-03-01
Petroleum products - Determination of low lead contents in gasolines -
Part 12: Wavelength-dispersive-X-ray fluorescence analysis (XRF)
DIN
DIN 68706-1:2020-06
En Vigor
2020-06-01
Internal doors made from wood or timber - Part 1: Door leaves; Terms,
dimensions and requirements / Note: Applies in conjunction with DIN
18101 (2014-08).
DIN
DIN 21913-4:2009-02
En Vigor
2009-02-01
Mine plans - Deep mining - Part 4: Hazardous zones, zones of protective measures
DIN
DIN 58932-6:2021-08
En Vigor
2021-08-01
Haematology - Determination of the concentration of blood corpuscles in
blood - Part 6: Reference method for the determination of the
concentration of CD4 positive lymphocytes; Text in German and English
DIN
DIN EN 328:2014-11
En Vigor
2014-11-01
Heat exchangers - Forced convection unit air coolers for refrigeration -
Test procedures for establishing the performance; German version EN 328:2014
DIN
DIN 58762-2:2015-12
En Vigor
2015-12-01
Production in optical engineering - Sintered diamond abrasive body -
Part 2: Pellets and grinding pins
DIN
DIN 6650-6:2014-12
En Vigor
2014-12-01
Dispense systems for draught beverages - Part 6: Requirements for
cleaning and disinfection
DIN
DIN 19682-7:2015-08
En Vigor
2015-08-01
Soil quality - Field tests - Part 7: Determination of infiltration rate
by double ring infiltrometer
DIN
DIN EN 15363:2014-08
En Vigor
2014-08-01
Chemicals used for treatment of swimming pool water - Chlorine; German
version EN 15363:2014
DIN
DIN
DIN 70042:2020-07
En Vigor
2020-07-01
Electrically propelled road vehicles - Safety specifications -
Requirements for insulation-bridging components and insulation
requirements for components; Text in German and English / Note: To be
replaced by DIN 70042 (2025-07).
DIN
DIN 38402-13:2021-12
En Vigor
2021-12-01
German standard methods for the examination of water, waste water and
sludge - General information (group A) - Part 13: Design and performance
of the sampling of groundwater (A 13)
DIN
DIN 54455:2016-09
En Vigor
2016-09-01
Testing of adhesives for metals and of bonded metal joints - Torsional
shear test
DIN
DIN 13157:2021-11
En Vigor
2021-11-01
First aid material - First aid box C / Note: DIN 13157 (2009-11) remains
valid alongside this standard until 2022-04-30.
DIN
DIN 58750-4:2009-02
En Vigor
2009-02-01
Production in optical engineering - Test of polishing agents for optical
engineering - Part 4: Qualification of polishing agents
DIN
DIN 376:2016-02
En Vigor
2016-02-01
Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
DIN
DIN EN 302636-2:2014-02
En Vigor
2014-02-01
Intelligent Transport Systems (ITS) - Vehicular Communications -
GeoNetworking - Part 2: Scenarios (Endorsement of the English version EN
302 636-2 V1.2.1 (2013-11) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN
DIN EN 1909:2017-05
En Vigor
2017-05-01
Safety requirements for cableway installations designed to carry persons
- Recovery and evacuation; German version EN 1909:2017
