Filtrar:
DIN
DIN EN ISO 9241-112:2025-12
En Vigor
2025-12-01
Ergonomics of human-system interaction - Part 112: Principles for the
presentation of information (ISO 9241-112:2025); German version EN ISO 9241-112:2025
DIN
DIN 988:2024-10
En Vigor
2025-12-01
Shim rings and supporting rings / Note: Date of issue 2024-09-13
DIN
DIN EN ISO 25178-605:2014-06
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
605: Nominal characteristics of non-contact (point autofocus probe)
instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN
DIN 8586:2003-09
En Vigor
2025-12-01
Manufacturing processes forming by bending - Classification,
subdivision, terms and definitions
DIN
DIN EN 13630-2:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 2:
Verification of thermal stability; German version EN 13630-2:2025
DIN
DIN EN ISO 21043-5:2025-12
En Vigor
2025-12-01
Forensic sciences - Part 5: Reporting (ISO 21043-5:2025); German and
English version EN ISO 21043-5:2025
DIN
DIN EN 13630-8:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 8:
Determination of resistance to water of detonating cords and safety
fuses; German and English version prEN 13630-8:2021 / Note: Date of
issue 2021-04-16
DIN
DIN EN ISO 21043-5:2024-06
En Vigor
2025-12-01
Forensic Sciences - Part 5: Reporting (ISO/DIS 21043-5:2024); German and
English version prEN ISO 21043-5:2024 / Note: Date of issue 2024-05-17
DIN
DIN 12918-1:2025-12
En Vigor
2025-12-01
Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN
DIN EN 13763-6:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
6: Determination of resistance to cracking in low temperatures of
leading wires; German and English version prEN 13763-6:2021 / Note: Date
of issue 2021-04-30
DIN
DIN EN IEC 61300-3-7/A1:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and return loss of single mode
components (IEC 86B/4939/CDV:2024); German and English version EN IEC
61300-3-7:2021/prA1:2024 / Note: Date of issue 2025-11-14*Intended as an
amendment to DIN EN IEC 61300-3-7 (2022-11).
DIN
DIN 1186-200:2025-12
En Vigor
2025-12-01
Concrete revetments in hydraulic engineering - Part 200: Evaluation of
conformity of non-interlocking revetment blocks in addition to DIN
1186-2 / Note: Date of issue 2025-11-14
DIN
DIN EN 13763-16:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
16: Determination of delay accuracy; German and English version prEN
13763-16:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 25178-601:2011-01
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
601: Nominal characteristics of contact (stylus) instruments (ISO
25178-601:2010); German version EN ISO 25178-601:2010
DIN
DIN/TS 26059-1:2025-12
En Vigor
2025-12-01
Components for overfill protection devices for liquids hazardous to
aquatic environment - Part 1: Requirements for sensors and transmitters
for overfill protection systems and components for overfill protection systems
DIN
DIN EN 15925:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of total sulfur present in various
forms; German and English version prEN 15925:2025 / Note: Date of issue
2025-11-07*Intended as replacement for DIN EN 15925 (2011-12).
DIN
DIN EN ISO 19085-7:2025-12
En Vigor
2025-12-01
Woodworking machines - Safety - Part 7: Surface planing, thickness
planing and combined surface/thickness planing machines (ISO
19085-7:2024); German version EN ISO 19085-7:2024
DIN
DIN 20000-300:2025-12
En Vigor
2025-12-01
Application of construction products in structures - Part 300: Rules for
the use of cold-formed profiled sheets made of steel and aluminum /
Note: Date of issue 2025-11-14
DIN
DIN EN 19/A1:2025-12
En Vigor
2025-12-01
Industrial valves - Marking of metallic valves; German and English
version EN 19:2023/prA1:2025 / Note: Date of issue 2025-11-07*Intended
as an amendment to DIN EN 19 (2024-03).
DIN
DIN EN ISO 19085-9:2025-12
En Vigor
2025-12-01
Woodworking machines - Safety - Part 9: Circular saw benches (with and
without sliding table) (ISO 19085-9:2024); German version EN ISO 19085-9:2024
DIN
DIN EN 17353:2020-11
En Vigor
2025-12-01
Protective clothing - Enhanced visibility equipment for medium risk
situations - Test methods and requirements; German version EN 17353:2020
/ Note: DIN EN 1150 (1999-02) and DIN EN 13356 (2001-12) remain valid
alongside this standard until 2023-08-31.
DIN
DIN EN ISO 19085-7:2019-10
En Vigor
2025-12-01
Woodworking machines - Safety - Part 7: Surface planing, thickness
planing, combined surface/thickness planing machines (ISO 19085-7:2019);
German version EN ISO 19085-7:2019 / Note: Applies in conjunction with
DIN EN ISO 19085-1 (2018-02).
DIN
DIN EN ISO 15614-2:2022-07
En Vigor
2025-12-01
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 2: Arc welding of aluminium
and its alloys (ISO/DIS 15614-2:2022); German and English version prEN
ISO 15614-2:2022 / Note: Date of issue 2022-06-03
DIN
DIN EN 13630-12:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 12:
Determination of burning duration of safety fuses; German version EN 13630-12:2025
DIN
DIN 4567-2:2024-04
En Vigor
2025-12-01
Ladders for special professional use - Part 2: Ladders for window
cleaning made of wood or aluminium / Note: Date of issue 2024-03-15
DIN
DIN EN 13763-18:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
18: Verification of the series firing current for electric detonators;
German version EN 13763-18:2025
DIN
DIN EN ISO 18397:2025-12
En Vigor
2025-12-01
Dentistry - Powered scaler (ISO 18397:2025); German version EN ISO 18397:2025
DIN
DIN EN 16585-2:2025-12
En Vigor
2025-12-01
Railway applications - Design for PRM use - Equipment and components on
board rolling stock - Part 2: Elements for sitting, standing and moving;
German version EN 16585-2:2025
DIN
DIN EN ISO 7899-3:2024-06
En Vigor
2025-12-01
Water quality - Enumeration of intestinal enterococci - Part 3: Most
probable number method (ISO/DIS 7899-3:2024); German and English version
prEN ISO 7899-3:2024 / Note: Date of issue 2024-05-17
DIN
DIN 79161-1:2025-12
En Vigor
2025-12-01
Playground inspection - Qualification of playground inspectors - Part 1:
Training and education / Note: DIN 79161-1 (2018-05) remains valid
alongside this standard until 2026-06-30.
DIN
DIN EN 18052:2025-12
En Vigor
2025-12-01
Intelligent transport systems - ESafety - ECall end to end conformance
testing for eCall HLAP in hybrid circuit switched/packet switched
network environments; English version EN 18052:2025
DIN
DIN EN ISO 21043-4:2025-12
En Vigor
2025-12-01
Forensic sciences - Part 4: Interpretation (ISO 21043-4:2025); English
version EN ISO 21043-4:2025
DIN
DIN 3975-3:2025-12
En Vigor
2025-12-01
Definitions and parameters on cylindrical worm gear pairs with
rectangular crossing shafts - Part 3: Worm and worm wheel with flanks of
different lead angles (Dual lead teeth)
DIN
DIN EN 12259-12/A1:2025-12
En Vigor
2025-12-01
Fixed firefighting systems - Components for sprinkler and water spray
systems - Part 12: Pumps - Amendment A1; German and English version EN
12259-12:2023/prA1:2025 / Note: Date of issue 2025-10-31*Intended as an
amendment to DIN EN 12259-12 (2023-11).
DIN
DIN EN ISO 25178-603:2014-02
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
603: Nominal characteristics of non-contact (phase-shifting
interferometric microscopy) instruments (ISO 25178-603:2013); German
version EN ISO 25178-603:2013
DIN
DIN 1186-2:2025-12
En Vigor
2025-12-01
Concrete revetments in hydraulic engineering - Part 2: Requirements for
non-interlocking revetments / Note: Date of issue 2025-11-14
DIN
DIN EN 4012:2025-12
En Vigor
2025-12-01
Aerospace series - Nut, bihexagonal, self-locking, in heat resisting
nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated -
Classification: 1 550 MPa (at ambient temperature)/425 °C; German and
English version EN 4012:2025
DIN
DIN EN ISO 25178-604:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
604: Design and characteristics of non-contact (coherence scanning
interferometry) instruments (ISO 25178-604:2025); German version EN ISO 25178-604:2025
DIN
DIN 19268:2025-12
En Vigor
2025-12-01
pH-measurement - pH-measurement of aqueous solutions with pH sensors
with pH glass electrodes and evaluation of measurement uncertainty /
Note: Date of issue 2025-10-31*Intended as replacement for DIN 19268 (2021-10).
DIN
DIN EN 4915-010:2025-12
En Vigor
2025-12-01
Aerospace series - Hermetically sealed relays 2PDT, 4PDT and 6PDT, 10
AMP - Part 010: Product standard; German and English version prEN
4915-010:2025 / Note: Date of issue 2025-11-21
DIN
DIN EN ISO 4255:2025-12
En Vigor
2025-12-01
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Mechanical properties of ceramic composites at high temperature -
Determination of axial tensile properties of tubes (ISO 4255:2025);
German version EN ISO 4255:2025
DIN
DIN EN 16585-3:2017-05
En Vigor
2025-12-01
Railway applications - Design for PRM use - Equipment and components on
board rolling stock - Part 3: Clearways and internal doors; German
version EN 16585-3:2017
DIN
DIN EN 14620-5:2023-09
En Vigor
2025-12-01
Design and manufacture of site built, vertical, cylindrical,
flat-bottomed tank systems for the storage of refrigerated, liquefied
gases with operating temperatures between 0 °C and -196 °C - Part 5:
Testing, drying, purging and cool-down; German and English version prEN
14620-5:2023 / Note: Date of issue 2023-08-11
DIN
DIN EN ISO 6143:2023-09
En Vigor
2025-12-01
Gas analysis - Comparison methods for determining and checking the
composition of calibration gas mixtures (ISO/DIS 6143:2023); German and
English version prEN ISO 6143:2023 / Note: Date of issue 2023-08-04
DIN
DIN EN 13630-7:2002-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 7:
Determination of the reliability of initiation of detonating cords;
German version EN 13630-7:2002
DIN
DIN CEN/TS 1401-2:2025-12
En Vigor
2025-12-01
Plastics piping systems for non-pressure underground drainage and
sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance
for the assessment of conformity; German version CEN/TS 1401-2:2025
DIN
DIN EN ISO 19870-1:2025-12
En Vigor
2025-12-01
Hydrogen technologies - Methodology for determining the greenhouse gas
emissions associated with the hydrogen supply chain - Part 1: Emissions
associated with the production of hydrogen to production gate (ISO/DIS
19870-1:2025); German and English version prEN ISO 19870-1:2025 / Note:
Date of issue 2025-10-31
DIN
DIN EN ISO/IEEE 11073-10700:2025-12
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10700: Point-of-care
medical device communication - Standard for base requirements for
participants in a Service-oriented Device Connectivity (SDC) system
(ISO/IEEE 11073-10700:2024); English version EN ISO/IEEE 11073-10700:2025
DIN
DIN ISO 21503:2020-12
En Vigor
2025-12-01
Project, programme and portfolio management - Guidance on programme
management (ISO 21503:2017); Text in German and English
DIN
DIN ISO 21504:2025-04
En Vigor
2025-12-01
Project, programme and portfolio management - Guidance on portfolio
management (ISO 21504:2022); Text in German and English / Note: Date of
issue 2025-03-07
DIN
DIN EN 13630-7:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 7:
Verification of reliability of initiation of detonating cords; German
version EN 13630-7:2025
DIN
DIN EN ISO 5832-2:2018-07
En Vigor
2025-12-01
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium
(ISO 5832-2:2018); German version EN ISO 5832-2:2018
DIN
DIN EN ISO 25178-601:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
601: Design and characteristics of contact (stylus) instruments (ISO
25178-601:2025); German version EN ISO 25178-601:2025
DIN
DIN EN 13763-16:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
16: Verification of delay time accuracy of electric and non-electric
detonators, surface connectors and detonating cord relays; German
version EN 13763-16:2025
DIN
DIN EN 17984-4:2024-04
En Vigor
2025-12-01
Assistance Dogs - Part 4: Training and Assessment; German and English
version prEN 17984-4:2024 / Note: Date of issue 2024-03-15
DIN
DIN EN 13630-6:2002-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 6:
Determination of resistance to tension of detonating cords; German
version EN 13630-6:2002
DIN
DIN EN 13630-8:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 8:
Verification of resistance to water; German version EN 13630-8:2025
DIN
DIN EN 14144:2024-12
En Vigor
2025-12-01
Lifebuoys - Requirements, tests; German and English version prEN
14144:2024 / Note: Date of issue 2024-11-22
DIN
DIN 4271-2:2012-10
En Vigor
2025-12-01
Manhole tops with vents, class B 125 - Part 2: Particulars / Note:
Applies in conjunction with DIN EN 124 (1994-08).
DIN
DIN EN 301908-25:2025-12
En Vigor
2025-12-01
IMT cellular networks - Harmonised Standard for access to radio spectrum
- Part 25: New Radio (NR) User Equipment (UE) - Release 15 (Endorsement
of the English version EN 301 908-25 V15.1.1 (2024-10) as a German
standard) / Note: DIN ETS standards collection*Endorsement notice
