Filtrar:
DIN
DIN EN ISO 11064-1:2001-08
En Vigor
2001-08-01
Ergonomic design of control centres - Part 1: Principles for the design
of control centres (ISO 11064-1:2000); German version EN ISO 11064-1:2000
DIN
DIN 38402-30:1998-07
En Vigor
1998-07-01
German standard methods for the examination of water, waste water and
sludge - General information (group A) - Part 30: Pretreatment,
homogenization and aliquotation of non-homogeneous water samples (A 30)
DIN
DIN
DIN
DIN 38409-1:1987-01
En Vigor
1987-01-01
German standard methods for the examination of water, waste water and
sludge; parameters characterizing effects and substances (group H);
determination of total dry residue, filtrate dry residue and residue on
ignition (H 1)
DIN
DIN EN ISO 3766:2004-05
En Vigor
2004-05-01
Construction drawings - Simplified representation of concrete
reinforcement (ISO 3766:2003); German version EN ISO 3766:2003
DIN
DIN 38406-26:1997-07
En Vigor
1997-07-01
German standard methods for the examination of water, waste water and
sludge - Cations (group E) - Part 26: Determination of thallium by
atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
DIN
DIN 29970:1998-09
En Vigor
1998-09-01
Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated -
Technical specification
DIN
DIN 75001:1981-03
En Vigor
1981-03-01
Classes of Application for Measuring Devices in Motor Vehicles
DIN
DIN 28400-7:1978-07
En Vigor
1978-07-01
Vakuum technology; terms and definitions, vacuum metallurgie
DIN
DIN 65149:1980-12
En Vigor
1980-12-01
Aerospace; screws of steel for non-structural components, M 3 and M 4,
technical specification
DIN
DIN EN 14278-2:2004-05
En Vigor
2004-05-01
Textiles - Determination of cotton fibre stickiness - Part 2: Method
using an automatic thermodetection plate device; German version EN 14278-2:2004
DIN
DIN 874-2:2003-11
En Vigor
2003-11-01
Geometrical Product Specifications (GPS) - Straight edges - Part 2:
Knife edge straight edges; Dimensions, technical delivery conditions
DIN
DIN EN ISO 787-22:2018-01
En Vigor
2018-01-01
General methods of test for pigments and extenders - Part 22: Comparison
of resistance to bleeding of pigments (ISO 787-22:1980); German version
EN ISO 787-22:2017
DIN
DIN EN ISO 7393-2:2019-03
En Vigor
2019-03-01
Water quality - Determination of free chlorine and total chlorine - Part
2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for
routine control purposes (ISO 7393-2:2017); German version EN ISO 7393-2:2018
DIN
DIN EN ISO 28017:2018-06
En Vigor
2018-06-01
Rubber hoses and hose assemblies, wire or textile reinforced, for
dredging applications - Specification (ISO 28017:2018); German version
EN ISO 28017:2018 / Note: To be replaced by DIN EN ISO 28017 (2025-03).
DIN
DIN EN ISO 9224:2012-05
En Vigor
2012-05-01
Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding
values for the corrosivity categories (ISO 9224:2012); German version EN
ISO 9224:2012
DIN
DIN
DIN EN ISO 19126:2021-09
En Vigor
2021-09-01
Geographic information - Feature concept dictionaries and registers (ISO
19126:2021); English version EN ISO 19126:2021
DIN
DIN 51001 Beiblatt 1:2010-05
En Vigor
2010-05-01
Testing of oxidic raw materials and basic materials - General bases of
work for X-Ray fluorescence method (XRF) - General survey on
disintegration methods referred to groups of materials for the
determination of test specimens for XRF
DIN
DIN EN ISO 1403:2019-12
En Vigor
2019-12-01
Rubber hoses, textile-reinforced, for general-purpose water applications
- Specification (ISO 1403:2019); German version EN ISO 1403:2019 / Note:
To be replaced by DIN EN ISO 1403 (2026-01).
DIN
DIN EN ISO 14160:2021-11
En Vigor
2021-11-01
Sterilization of health care products - Liquid chemical sterilizing
agents for single-use medical devices utilizing animal tissues and their
derivatives - Requirements for characterization, development, validation
and routine control of a sterilization process for medical devices (ISO
14160:2020); German version EN ISO 14160:2021
DIN
DIN 30767:2025-04
En Vigor
2025-04-01
Forestry machinery - Field of vision - Measuring procedures and requirements
DIN
DIN EN ISO 6145-9:2011-03
En Vigor
2011-03-01
Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German
version EN ISO 6145-9:2010
DIN
DIN 21913-11:2000-01
En Vigor
2000-01-01
Mine plans - Deep mining - Part 11: Geometrical dimensions in
underground workings
DIN
DIN EN ISO 6142-1:2015-12
En Vigor
2015-12-01
Gas analysis - Preparation of calibration gas mixtures - Part 1:
Gravimetric method for Class I mixtures (ISO 6142-1:2015); German
version EN ISO 6142-1:2015
DIN
DIN EN ISO 19085-15:2022-12
En Vigor
2022-12-01
Woodworking machines - Safety - Part 15: Presses (ISO/DIS
19085-15:2022); German and English version prEN ISO 19085-15:2022 /
Note: Date of issue 2022-11-18*Intended as replacement for DIN EN ISO
19085-15 (2022-05).
DIN
DIN
DIN EN ISO 3071:2020-05
En Vigor
2020-05-01
Textiles - Determination of pH of aqueous extract (ISO 3071:2020);
German version EN ISO 3071:2020
DIN
DIN EN ISO 14362-3:2017-05
En Vigor
2017-05-01
Textiles - Methods for determination of certain aromatic amines derived
from azo colorants - Part 3: Detection of the use of certain azo
colorants, which may release 4-aminoazobenzene (ISO 14362-3:2017);
German version EN ISO 14362-3:2017
DIN
DIN
DIN 51810-1:2017-04
En Vigor
2017-04-01
Testing of lubricants - Testing rheological properties of lubricating
greases - Part 1: Determination of shear viscosity by rotational
viscosimeter and the system of cone/plate
DIN
DIN EN ISO 12782-3:2012-09
En Vigor
2012-09-01
Soil quality - Parameters for geochemical modelling of leaching and
speciation of constituents in soils and materials - Part 3: Extraction
of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid
(ISO 12782-3:2012); German version EN ISO 12782-3:2012
DIN
DIN
DIN 72763-1:1977-03
En Vigor
1977-03-01
Combined starting switches; heater plug starting switch with turn grip
for a nominal voltage up to 24 V
DIN
DIN EN ISO 18674-1:2015-09
En Vigor
2015-09-01
Geotechnical investigation and testing - Geotechnical monitoring by
field instrumentation - Part 1: General rules (ISO 18674-1:2015); German
version EN ISO 18674-1:2015
DIN
DIN 43620-1:1984-05
En Vigor
1984-05-01
Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC
fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN
DIN EN ISO 12180-2:2011-07
En Vigor
2011-07-01
Geometrical product specifications (GPS) - Cylindricity - Part 2:
Specification operators (ISO 12180-2:2011); German version EN ISO 12180-2:2011
DIN
DIN EN ISO 16424:2018-01
En Vigor
2018-01-01
Nuclear energy - Evaluation of homogeneity of Gd distribution within
gadolinium fuel blends and determination of
Gd<(Index)2>O<(Index)3> content in gadolinium fuel pellets
by measurements of uranium and gadolinium elements (ISO 16424:2012);
German version EN ISO 16424:2017
DIN
DIN ETS 300580-2:2001-04
En Vigor
2001-04-01
Digital cellular telecommunications system (Phase 2) - Full rate speech
- Part 2: Transcoding (Endorsement of the English version ETS
300580-2:1998-03 as German standard) / Note: Endorsement notice
DIN
DIN
DIN EN 13499:2003-12
En Vigor
2003-12-01
Thermal insulation products for buildings - External thermal insulation
composite systems (ETICS) based on expanded polystyrene - Specification;
German version EN 13499:2003 / Note: To be replaced by DIN EN 17237 (2018-06).
DIN
DIN
DIN 53943-2:1978-07
En Vigor
1978-07-01
Testing of textiles; state of maturity of cotton fibres, microscopic
method, swelling in caustic soda solution
DIN
DIN 14800-18 Beiblatt 9:2011-11
En Vigor
2011-11-01
Fire-fighting equipment for fire-fighting and rescue service vehicles -
Part 18: Additional equipment loading sets for fire fighting vehicles;
Supplement 9: Equipment loading set I, pull device with mechanical drive
/ Note: Applies in conjunction with DIN 14800-18 (2011-11).
DIN
DIN EN ISO 5470-1:2017-04
En Vigor
2017-04-01
Rubber- or plastics-coated fabrics - Determination of abrasion
resistance - Part 1: Taber abrader (ISO 5470-1:2016); German version EN
ISO 5470-1:2016
DIN
DIN
DIN EN ISO 23611-3:2020-01
En Vigor
2020-01-01
Soil quality - Sampling of soil invertebrates - Part 3: Sampling and
extraction of enchytraeids (ISO 23611-3:2019); German version EN ISO 23611-3:2019
DIN
DIN 43204:1980-12
En Vigor
1980-12-01
Mouting and connecting dimensions; traction motors for two-axle
longitudinal drive with two hollow axle shafts
DIN
DIN
DIN EN ISO 10399:2018-04
En Vigor
2018-04-01
Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German
version EN ISO 10399:2018 / Note: To be replaced by DIN EN ISO 10399 (2025-09).
DIN
DIN 637:2024-12
En Vigor
2024-12-01
Rolling bearings - Safety regulations for dimensioning and operation of
profiled rail guides with recirculating rolling elements; Text in German
and English / Note: DIN 637 (2016-12) remains valid alongside this
standard until 2025-05-31.
DIN
DIN
DIN 763:1990-12
En Vigor
1990-12-01
Tested, non-calibrated, long-link round steel chains / Note: To be
replaced by DIN 763 (2026-03).
DIN
DIN EN ISO 11461:2014-07
En Vigor
2014-07-01
Soil quality - Determination of soil water content as a volume fraction
using coring sleeves - Gravimetric method (ISO 11461:2001); German
version EN ISO 11461:2014
DIN
DIN 41772 Beiblatt 1:1979-02
En Vigor
1979-02-01
Static power convertors; semiconductor rectifier equipment, examples of
characteristic curves for battery chargers
DIN
DIN EN 61755-3-7:2009-09
En Vigor
2009-09-01
Fibre optic interconnecting devices and passive components - Fibre optic
connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and
1,25 mm diameter cylindrical PC composite ferrule using titanium as
fibre surrounding material, single mode fibre (IEC 61755-3-7:2009);
German version EN 61755-3-7:2009 / Note: To be replaced by DIN EN IEC
61755-3-7 (2025-12), DIN EN 61755-3-7 (2014-06).
DIN
DIN 1830-1:1974-06
En Vigor
1974-06-01
Inserted blade face milling cutters for internal alignment on spindle
noses according to DIN 2079
DIN
DIN 18889:1956-11
En Vigor
1956-11-01
Coal-fired Water-heater with Storage Boiler, without Pressure for Test
Pressure of 1 Atmosphere; Terms employed, Construction, Quality,
Capacity and Testing
DIN
DIN EN 61300-3-2:2009-09
En Vigor
2009-09-01
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-2: Examinations and measurements -
Polarization dependent loss in a single-mode fibre optic device (IEC
61300-3-2:2009); German version EN 61300-3-2:2009 / Note: DIN EN
61300-3-2 (2000-09) and DIN EN 61300-3-12 (1997-11) remain valid
alongside this standard until 2010-02-01.
