Filtrar:
DIN
DIN EN 15764:2010-04
En Vigor
2010-04-01
Foodstuffs - Determination of trace elements - Determination of tin by
flame and graphite furnace atomic absorption spectrometry (FAAS and
GFAAS) after pressure digestion; German version EN 15764:2009
DIN
DIN EN 4673-001:2011-05
En Vigor
2011-05-01
Aerospace series - Inserts, UNJ threads, self-locking, with
self-broaching keys - Part 001: Installation and removal procedure;
German and English version EN 4673-001:2010
DIN
DIN 85003-7:2011-02
En Vigor
2011-02-01
Technical specifications for valves for shipboard use - Part 7:
Diaphragm valves
DIN
DIN EN ISO 52017-1:2018-04
En Vigor
2018-04-01
Energy performance of buildings - Sensible and latent heat loads and
internal temperatures - Part 1: Generic calculation procedures (ISO
52017-1:2017); German version EN ISO 52017-1:2017
DIN
DIN 22100-5:2025-09
En Vigor
2025-09-01
Plastics articles and materials for use in underground mines - Part 5:
Tubes, tube isolations, hoses, sheeting, coated/uncoated tissue,
brattice materials and lagging mats - Safety requirements, testings,
marking / Note: DIN 22100-5 (2010-10) and DIN 22100-6 (2010-10) remain
valid alongside this standard until 2026-02-28.
DIN
DIN
DIN EN 13578:2004-03
En Vigor
2004-03-01
Products and systems for the protection and repair of concrete structure
- Test method - Compatibility on wet concrete; German version EN 13578:2003
DIN
DIN 16620-2:1991-09
En Vigor
1991-09-01
Printing technology; printing plates for offset printing; terminology
and principles of measurement techniques
DIN
DIN 24296:1998-01
En Vigor
1998-01-01
Pumps and pump units for liquids - Spare parts - Selection and procurement
DIN
DIN 15018-3:1984-11
En Vigor
1984-11-01
Cranes; principles relating to steel structures; design of cranes on vehicles
DIN
DIN EN 14072:2004-02
En Vigor
2004-02-01
Glass in furniture - Test methods; German version EN 14072:2003
DIN
DIN EN ISO 6781-3:2016-05
En Vigor
2016-05-01
Performance of buildings - Detection of heat, air and moisture
irregularities in buildings by infrared methods - Part 3: Qualifications
of equipment operators, data analysts and report writers (ISO
6781-3:2015); German version EN ISO 6781-3:2015
DIN
DIN EN ISO 15616-3:2003-05
En Vigor
2003-05-01
Acceptance tests for CO<(Index)2>-laser beam machines for high
quality welding and cutting - Part 3: Calibration of instruments for
measurement of gas flow and pressure (ISO 15616-3:2003); German version
EN ISO 15616-3:2003
DIN
DIN EN ISO 14935:2020-07
En Vigor
2020-07-01
Petroleum and related products - Determination of wick flame persistence
of fire-resistant fluids (ISO 14935:2020); German version EN ISO 14935:2020
DIN
DIN
DIN EN ISO 12944-5:2020-03
En Vigor
2020-03-01
Paints and varnishes - Corrosion protection of steel structures by
protective paint systems - Part 5: Protective paint systems (ISO
12944-5:2019); German version EN ISO 12944-5:2019
DIN
DIN EN 14266:2003-12
En Vigor
2003-12-01
Derivatives from coal pyrolysis - Coal tar and pitch based binders and
related products: Coating tar - Characteristics and test methods; German
version EN 14266:2003
DIN
DIN EN ISO 2858:2011-12
En Vigor
2011-12-01
End-suction centrifugal pumps (rating 16 bar) - Designation, nominal
duty point and dimensions (ISO 2858:1975); German version EN ISO 2858:2010
DIN
DIN EN ISO 2418:2023-05
En Vigor
2023-05-01
Leather - Chemical, physical, mechanical and fastness tests - Position
and preparation of specimens for testing (ISO 2418:2023); German version
EN ISO 2418:2023
DIN
DIN EN ISO 17059:2019-12
En Vigor
2019-12-01
Oilseeds - Extraction of oil and preparation of methyl esters of
triglyceride fatty acids for analysis by gas chromatography (Rapid
method) (ISO 17059:2019); German version EN ISO 17059:2019
DIN
DIN EN ISO 11148-4:2013-05
En Vigor
2013-05-01
Hand-held non-electric power tools - Safety requirements - Part 4:
Non-rotary percussive power tools (ISO 11148-4:2012); German version EN
ISO 11148-4:2012
DIN
DIN EN ISO 16954:2015-11
En Vigor
2015-11-01
Dentistry - Test methods for dental unit waterline biofilm treatment
(ISO 16954:2015); German version EN ISO 16954:2015
DIN
DIN 70024-1:1977-11
En Vigor
1977-11-01
Vocabulary for components of motor vehicles and their trailers;
controls, indicators and tell-tales
DIN
DIN EN 15221-7:2013-01
En Vigor
2013-01-01
Facility Management - Part 7: Guidelines for Performance Benchmarking;
German version EN 15221-7:2012 / Note: To be replaced by DIN EN 15221-8 (2023-09).
DIN
DIN IEC 60678:1985-09
En Vigor
1985-09-01
Definitions of CAMAC terms used in IEC-publications; identical with IEC
60678, edition 1980
DIN
DIN
DIN EN ISO 13078-2:2016-12
En Vigor
2016-12-01
Dentistry - Dental furnace - Part 2: Test method for evaluation of
furnace programme via firing glaze (ISO 13078-2:2016); German version EN
ISO 13078-2:2016
DIN
DIN 38407-17:1999-02
En Vigor
1999-02-01
German standard methods for the examination of water, waste water and
sludge - Jointly determinable substances (group F) - Part 17:
Determination of selected nitroaromatic compounds by gas-liquid
chromatography (F 17)
DIN
DIN EN ISO 9241-306:2018-12
En Vigor
2018-12-01
Ergonomics of human-system interaction - Part 306: Field assessment
methods for electronic visual displays (ISO 9241-306:2018); German
version EN ISO 9241-306:2018
DIN
DIN
DIN EN ISO 14692-3:2018-02
En Vigor
2018-02-01
Petroleum and natural gas industries - Glass-reinforced plastics (GRP)
piping - Part 3: System design (ISO 14692-3:2017); English version EN
ISO 14692-3:2017
DIN
DIN EN ISO 18323:2015-11
En Vigor
2015-11-01
Jewellery - Consumer confidence in the diamond industry (ISO
18323:2015); German version EN ISO 18323:2015
DIN
DIN 30658-1:1998-01
En Vigor
1998-01-01
Materials for the subsequent sealing of joints in underground gas mains
- Part 1: Plastic foil and textile fibre linings used to seal gaspipes
already in place; safety requirements and testing
DIN
DIN 65668:1998-08
En Vigor
1998-08-01
Aerospace series - Dilution of oils for the purpose of particles counting
DIN
DIN EN ISO 20769-2:2018-12
En Vigor
2018-12-01
Non-destructive testing - Radiographic inspection of corrosion and
deposits in pipes by X- and gamma rays - Part 2: Double wall
radiographic inspection (ISO 20769-2:2018); German version EN ISO
20769-2:2018 / Note: To be replaced by DIN EN ISO 20769-2 (2026-02).
DIN
DIN
DIN 19671-1:1964-05
En Vigor
1964-05-01
Soil drilling apparatus for drawing soil samples in agricultural
engineering; groove borers, tube borers
DIN
DIN EN 50377-9-1:2003-11
En Vigor
2003-11-01
Connector sets and interconnect components to be used in optical fibre
communication systems - Product specifications - Part 9-1: Type MT-RJ
terminated on IEC 60793-2 category A1a and A1b multimode fibre; German
version EN 50377-9-1:2003
DIN
DIN EN ISO 9241-920:2016-09
En Vigor
2016-09-01
Ergonomics of human-system interaction - Part 920: Guidance on tactile
and haptic interactions (ISO 9241-920:2009); German version EN ISO
9241-920:2016 / Note: To be replaced by DIN EN ISO 9241-920 (2023-03).
DIN
DIN EN ISO 15796:2008-11
En Vigor
2008-11-01
Gas analysis - Investigation and treatment of analytical bias (ISO
15796:2005); German version EN ISO 15796:2008
DIN
DIN
DIN EN 61249-2-22:2005-08
En Vigor
2005-08-01
Materials for printed boards and other interconnecting structures - Part
2-22: Reinforced base materials clad and unclad - Modified
non-halogenated epoxide woven E-glass laminated sheets of defined
flammability (vertical burning test), copper-clad (IEC 61249-2-22:2005);
German version EN 61249-2-22:2005
DIN
DIN 4017 Beiblatt 1:2006-11
En Vigor
2006-11-01
Soil - Calculation of design bearing capacity of soil beneath shallow
foundations - Calculation examples
DIN
DIN 2282-1:2000-01
En Vigor
2000-01-01
Verification of geometrical parameters - "GO" screw gauging
members - Part 1: "GO" workshop gauges, reference and setting
gauges for ISO general purpose metric screw threads from 1 mm up to 40
mm nominal diameter
DIN
DIN EN ISO 13255:2018-01
En Vigor
2018-01-01
Thermoplastics piping systems for soil and waste discharge inside
buildings - Test method for airtightness of joints (ISO 13255:2010);
German version EN ISO 13255:2017
DIN
DIN EN ISO 11127-4:2021-05
En Vigor
2021-05-01
Preparation of steel substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives - Part
4: Assessment of hardness by a glass slide test (ISO 11127-4:2020);
German version EN ISO 11127-4:2020
DIN
DIN 9680:1991-01
En Vigor
1991-01-01
Agricultural tractors and machinery; electric power transmission;
dimensions, requirements
DIN
DIN EN ISO 13468-1:2019-10
En Vigor
2019-10-01
Plastics - Determination of the total luminous transmittance of
transparent materials - Part 1: Single-beam instrument (ISO
13468-1:2019); German version EN ISO 13468-1:2019
DIN
DIN 51589-1:1991-03
En Vigor
1991-03-01
Determination of water separation ability of lubricating oils and
low-flammability fluids after contact with steam
DIN
DIN EN ISO/IEC 15423:2010-12
En Vigor
2010-12-01
Information technology - Automatic identification and data capture
techniques - Bar code scanner and decoder performance testing (ISO/IEC
15423:2009); English version EN ISO/IEC 15423:2010
DIN
DIN EN ISO 24265:2021-02
En Vigor
2021-02-01
Footwear - Test methods for uppers - Resistance to rubbing using a
rubber strip (ISO 24265:2020); German version EN ISO 24265:2020
DIN
DIN EN ISO 18496:2021-12
En Vigor
2021-12-01
Brazing - Fluxes for brazing - Classification and technical delivery
conditions (ISO 18496:2020); German version EN ISO 18496:2021
DIN
DIN EN ISO 12625-5:2024-09
En Vigor
2024-09-01
Tissue paper and tissue products - Part 5: Determination of wet tensile
strength (ISO 12625-5:2024); German version EN ISO 12625-5:2024
DIN
DIN EN ISO/CIE 11664-3:2020-03
En Vigor
2020-03-01
Colorimetry - Part 3: CIE tristimulus values (ISO/CIE 11664-3:2019);
German version EN ISO/CIE 11664-3:2019
DIN
DIN
DIN EN ISO 28765:2023-03
En Vigor
2023-03-01
Vitreous and porcelain enamels - Design of bolted steel tanks for the
storage or treatment of water or municipal or industrial effluents and
sludges (ISO 28765:2022); German version EN ISO 28765:2022
DIN
DIN EN ISO 15750-3:2022-12
En Vigor
2022-12-01
Packaging - Steel drums - Part 3: Inserted flange-type closure systems
(ISO 15750-3:2022); German version EN ISO 15750-3:2022
DIN
DIN
DIN 1414-2:1998-06
En Vigor
1998-06-01
Technical specifications for twist drills of high-speed steel - Part 2: Inspection
DIN
DIN EN ISO 10426-6:2008-11
En Vigor
2008-11-01
Petroleum and natural gas industries - Cements and materials for well
cementing - Part 6: Methods for determining the static gel strength of
cement formulations (ISO 10426-6:2008); English version EN ISO 10426-6:2008










