Filtrar:
DIN
DIN 86103:2025-07
En Vigor
2025-07-01
Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN
DIN 18896:2025-09
En Vigor
2025-09-01
Fireplaces fired by solid fuel - Technical specifications for installation
DIN
DIN EN 378-1:2025-07
En Vigor
2025-07-01
Refrigerating systems and heat pumps - Safety and environmental
requirements - Part 1: Basic requirements, definitions, classification
and selection criteria; German and English version prEN 378-1:2025 /
Note: Date of issue 2025-05-30*Intended as replacement for DIN EN 378-1
(2021-06, t).
DIN
DIN EN 13630-2:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 2:
Verification of thermal stability; German version EN 13630-2:2025
DIN
DIN EN ISO 21043-5:2025-12
En Vigor
2025-12-01
Forensic sciences - Part 5: Reporting (ISO 21043-5:2025); German and
English version EN ISO 21043-5:2025
DIN
DIN EN 17860-2:2025-06
En Vigor
2025-06-01
Carrier Cycles - Part 2: Lightweight single track carrier cycles -
Mechanical aspects; German version EN 17860-2:2024
DIN
DIN EN 4533-002:2025-08
En Vigor
2025-08-01
Aerospace series - Fibre optic systems - Handbook - Part 002: Test and
measurement; German version ASD-STAN prEN 4533-002:2025 / Note: Date of
issue 2025-06-27*Intended as replacement for DIN EN 4533-002 (2018-04).
DIN
DIN EN ISO 13341:2025-10
En Vigor
2025-10-01
Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2025);
German version EN ISO 13341:2025
DIN
DIN EN 13630-8:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 8:
Determination of resistance to water of detonating cords and safety
fuses; German and English version prEN 13630-8:2021 / Note: Date of
issue 2021-04-16
DIN
DIN EN ISO 21043-5:2024-06
En Vigor
2025-12-01
Forensic Sciences - Part 5: Reporting (ISO/DIS 21043-5:2024); German and
English version prEN ISO 21043-5:2024 / Note: Date of issue 2024-05-17
DIN
DIN 7079:2025-08
En Vigor
2025-08-01
Pressure resistant circular glass-to-metal fused sight glasses for
holders with recess
DIN
DIN EN 17867:2025-06
En Vigor
2025-06-01
Petrol fuel for small internal combustion engines - Requirements and
test methods; German version EN 17867:2023+A1:2025
DIN
DIN EN 17744:2025-09
En Vigor
2025-09-01
Agricultural and forestry machinery - Environmental requirements for
dusters; German version EN 17744:2025
DIN
DIN EN 1-2:2025-07
En Vigor
2025-07-01
Residential liquid fuel burning appliances - Part 2: Flued oil stoves
with vaporizing burners; German version EN 1-2:2025
DIN
DIN 18111-3:2025-11
En Vigor
2026-06-01
Door frames - Steel door frames - Part 3: Installation of steel door
frames according to DIN 18111-1 and DIN 18111-2 / Note: Date of issue 2025-10-10
DIN
DIN EN ISO 19650-6:2025-10
En Vigor
2025-10-01
Organization and digitization of information about buildings and civil
engineering works, including building information modelling (BIM) -
Information management using building information modelling - Part 6:
Health and safety information (ISO 19650-6:2025); German version EN ISO 19650-6:2025
DIN
DIN 12918-1:2025-12
En Vigor
2025-12-01
Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN
DIN EN 13763-6:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
6: Determination of resistance to cracking in low temperatures of
leading wires; German and English version prEN 13763-6:2021 / Note: Date
of issue 2021-04-30
DIN
DIN EN IEC 61300-3-7/A1:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and return loss of single mode
components (IEC 86B/4939/CDV:2024); German and English version EN IEC
61300-3-7:2021/prA1:2024 / Note: Date of issue 2025-11-14*Intended as an
amendment to DIN EN IEC 61300-3-7 (2022-11).
DIN
DIN 55634-2:2025-08
En Vigor
2025-08-01
Paints, varnishes and coatings - Corrosion protection of supporting
thin-walled building components made of steel - Part 2: Surveillance and
certification requirements
DIN
DIN 53377:2024-08
En Vigor
2024-08-01
Testing of plastic films - Determination of dimensional stability
DIN
DIN EN 16202:2025-08
En Vigor
2025-08-01
Compost and digestate - Determination of the content of macroscopic
impurities and stones; German and English version prEN 16202:2025 /
Note: Date of issue 2025-07-18*Intended as replacement for DIN CEN/TS
16202 (2013-12).
DIN
DIN EN ISO 10511:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Thin nuts (with
non-metallic insert) (ISO 10511:2025); German version EN ISO 10511:2025
DIN
DIN EN ISO 10256-5:2025-09
En Vigor
2025-09-01
Protective equipment for use in ice hockey - Part 5: Neck laceration
protectors for use in ice hockey (ISO/DIS 10256-5.2:2025); German and
English version prEN ISO 10256-5:2025 / Note: Date of issue 2025-08-15
DIN
DIN CEN/TS 17217:2025-11
En Vigor
2025-11-01
Postal services - Reverse envelope - Design and printing requirements;
German version CEN/TS 17217:2024
DIN
DIN 1186-200:2025-12
En Vigor
2025-12-01
Concrete revetments in hydraulic engineering - Part 200: Evaluation of
conformity of non-interlocking revetment blocks in addition to DIN
1186-2 / Note: Date of issue 2025-11-14
DIN
DIN EN 13763-16:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
16: Determination of delay accuracy; German and English version prEN
13763-16:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 25178-601:2011-01
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
601: Nominal characteristics of contact (stylus) instruments (ISO
25178-601:2010); German version EN ISO 25178-601:2010
DIN
DIN EN ISO 8742:2025-07
En Vigor
2025-07-01
Fasteners - Grooved pins - One-third-length center grooves (ISO/DIS
8742:2025); German and English version prEN ISO 8742:2025 / Note: Date
of issue 2025-05-30*Intended as replacement for DIN EN ISO 8742 (1998-03).
DIN
DIN EN ISO 7719:2025-09
En Vigor
2025-09-01
Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal)
(ISO 7719:2025); German version EN ISO 7719:2025
DIN
DIN/TS 26059-1:2025-12
En Vigor
2025-12-01
Components for overfill protection devices for liquids hazardous to
aquatic environment - Part 1: Requirements for sensors and transmitters
for overfill protection systems and components for overfill protection systems
DIN
DIN EN 15925:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of total sulfur present in various
forms; German and English version prEN 15925:2025 / Note: Date of issue
2025-11-07*Intended as replacement for DIN EN 15925 (2011-12).
DIN
DIN EN ISO 19085-7:2025-12
En Vigor
2025-12-01
Woodworking machines - Safety - Part 7: Surface planing, thickness
planing and combined surface/thickness planing machines (ISO
19085-7:2024); German version EN ISO 19085-7:2024
DIN
DIN 67500:2025-08
En Vigor
2025-08-01
Illumination of lock areas - Requirements, design and measurement /
Note: Date of issue 2025-06-27*Intended as replacement for DIN 67500 (1987-12).
DIN
DIN EN ISO 9092:2025-07
En Vigor
2025-07-01
Nonwovens - Vocabulary (ISO/DIS 9092:2025); German and English version
prEN ISO 9092:2025 / Note: Date of issue 2025-06-20*Intended as
replacement for DIN EN ISO 9092 (2019-08).
DIN
DIN EN 16319:2025-09
En Vigor
2025-09-01
Inorganic fertilizers and liming materials - Determination of specific
elements - Determination of cadmium, chromium, copper, lead, nickel and
zinc by inductively coupled plasma-atomic emission spectrometry
(ICP-AES) after aqua regia dissolution; German and English version prEN
16319:2025 / Note: Date of issue 2025-08-22*Intended as replacement for
DIN EN 16319 (2016-03).
DIN
DIN EN ISO 18752:2025-09
En Vigor
2025-09-01
Rubber hoses and hose assemblies - Wire- or textile-reinforced
single-pressure types for hydraulic applications - Specification (ISO
18752:2025); German version EN ISO 18752:2025
DIN
DIN EN 12312-15:2025-11
En Vigor
2025-11-01
Aircraft ground support equipment - Specific requirements - Part 15:
Baggage and equipment tractors; German and English version EN
12312-15:2020+A2:2025 / Note: DIN EN 12312-15 (2023-02) remains valid
alongside this standard until 2026-01-31.*Applies in conjunction with
DIN EN 1915-1 (2023-12), DIN EN 1915-2 (2009-06), DIN EN 1915-3
(2009-06), DIN EN 1915-4 (2009-06).
DIN
DIN 20000-300:2025-12
En Vigor
2025-12-01
Application of construction products in structures - Part 300: Rules for
the use of cold-formed profiled sheets made of steel and aluminum /
Note: Date of issue 2025-11-14
DIN
DIN EN 19/A1:2025-12
En Vigor
2025-12-01
Industrial valves - Marking of metallic valves; German and English
version EN 19:2023/prA1:2025 / Note: Date of issue 2025-11-07*Intended
as an amendment to DIN EN 19 (2024-03).
DIN
DIN EN ISO 19085-9:2025-12
En Vigor
2025-12-01
Woodworking machines - Safety - Part 9: Circular saw benches (with and
without sliding table) (ISO 19085-9:2024); German version EN ISO 19085-9:2024
DIN
DIN EN ISO 15883-3:2025-07
En Vigor
2025-07-01
Washer-disinfectors - Part 3: Requirements and tests for
washer-disinfectors employing thermal disinfection for human waste
containers (ISO 15883-3:2024); German version EN ISO 15883-3:2025
DIN
DIN EN 60317-46/A1:2025-09
En Vigor
2025-09-01
Specifications for particular types of winding wires - Part 46: Aromatic
polyimide enamelled round copper wire, class 240 (IEC
60317-46:2013/AMD1:2024); German version EN 60317-46:2014/A1:2024 /
Note: Date of issue 2025-08-15*Intended as an amendment to DIN EN
60317-46 (2014-09).
DIN
DIN EN ISO 11092:2025-08
En Vigor
2025-08-01
Textiles - Physiological effects - Measurement of thermal and
water-vapour resistance under steady-state conditions (sweating
guarded-hotplate test) (ISO/DIS 11092:2025); German and English version
prEN ISO 11092:2025 / Note: Date of issue 2025-07-11*Intended as
replacement for DIN EN ISO 11092 (2014-12).
DIN
DIN EN 3155-005:2025-11
En Vigor
2025-11-01
Aerospace series - Electrical contacts used in elements of connection -
Part 005: Contacts, electrical, female, type A, crimp, class T - Product
standard; German and English version EN 3155-005:2025 / Note: Applies in
conjunction with DIN EN 3155-001 (2025-10).
DIN
DIN ISO 639:2025-11
En Vigor
2025-11-01
Code for individual languages and language groups (ISO 639:2023); Text
in German and English / Note: Date of issue 2025-10-24*Intended as
replacement for DIN 2335 (2016-08).
DIN
DIN EN 17353:2020-11
En Vigor
2025-12-01
Protective clothing - Enhanced visibility equipment for medium risk
situations - Test methods and requirements; German version EN 17353:2020
/ Note: DIN EN 1150 (1999-02) and DIN EN 13356 (2001-12) remain valid
alongside this standard until 2023-08-31.
DIN
DIN EN ISO 19085-7:2019-10
En Vigor
2025-12-01
Woodworking machines - Safety - Part 7: Surface planing, thickness
planing, combined surface/thickness planing machines (ISO 19085-7:2019);
German version EN ISO 19085-7:2019 / Note: Applies in conjunction with
DIN EN ISO 19085-1 (2018-02).
DIN
DIN EN ISO 15614-2:2022-07
En Vigor
2025-12-01
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 2: Arc welding of aluminium
and its alloys (ISO/DIS 15614-2:2022); German and English version prEN
ISO 15614-2:2022 / Note: Date of issue 2022-06-03
DIN
DIN 6800-8:2025-09
En Vigor
2025-09-01
Procedures of dosimetry with probe-type detectors for photon and
electron radiation - Part 8: MR-Accelerator dosimetry of high energy
photon radiation / Note: Date of issue 2025-08-22
DIN
DIN EN 1621-4:2025-08
En Vigor
2025-08-01
Motorcyclists' protective clothing against mechanical impact - Part 4:
Motorcyclists' inflatable protectors - Requirements and test methods;
German and English version prEN 1621-4:2025 / Note: Date of issue
2025-07-18*Intended as replacement for DIN EN 1621-4 (2013-04).
DIN
DIN EN 14363-2:2025-07
En Vigor
2025-07-01
Railway applications - Testing and simulation for the acceptance of
running characteristics of railway vehicles operated on the heavy rail
network - Part 2: Safety against derailment on twisted track; German and
English version prEN 14363-2:2025 / Note: Date of issue
2025-05-30*Intended as replacement for DIN EN 14363 (2022-10).
DIN
DIN EN ISO 13433:2025-09
En Vigor
2025-09-01
Geosynthetics - Determination of dynamic perforation (cone drop test)
(ISO 13433:2025); German version EN ISO 13433:2025
DIN
DIN EN ISO 22074-4/A1:2025-11
En Vigor
2025-11-01
Railway infrastructure - Rail fastening systems - Part 4: Test methods
for resistance to repeated loading - Amendment 1 (ISO 22074-4:2022/DAM
1:2025); German and English version EN ISO 22074-4:2024/prA1:2025 /
Note: Date of issue 2025-10-24*Intended as an amendment to DIN EN ISO
22074-4 (2024-07).
DIN
DIN EN 13630-12:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 12:
Determination of burning duration of safety fuses; German version EN 13630-12:2025
DIN
DIN 4567-2:2024-04
En Vigor
2025-12-01
Ladders for special professional use - Part 2: Ladders for window
cleaning made of wood or aluminium / Note: Date of issue 2024-03-15
DIN
DIN EN 61709:2025-08
En Vigor
2025-08-01
Electric components - Reliability - Reference conditions for failure
rates and stress models for conversion (IEC 61709:2017 + COR1:2019);
German version EN 61709:2017 + AC:2019
DIN
DIN EN ISO 11357-6:2025-09
En Vigor
2025-09-01
Plastics - Differential scanning calorimetry (DSC) - Part 6:
Determination of oxidation induction time (isothermal OIT) and oxidation
induction temperature (dynamic OIT) (ISO 11357-6:2025); German version
EN ISO 11357-6:2025
DIN
DIN EN ISO 148-2:2025-11
En Vigor
2025-11-01
Metallic materials - Charpy pendulum impact test - Part 2: Verification
of testing machines (ISO/DIS 148-2:2025); German and English version
prEN ISO 148-2:2025 / Note: Date of issue 2025-10-24*Intended as
replacement for DIN EN ISO 148-2 (2017-05).
DIN
DIN EN 13763-18:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
18: Verification of the series firing current for electric detonators;
German version EN 13763-18:2025
