Filtrar:
DIN
DIN 51637:2014-02
En Vigor
2014-02-01
Liquid petroleum products - Determination of the bio-based hydrocarbon
content in diesel fuels and middle distillates using liquid
scintillation method
DIN
DIN 18100:1983-10
En Vigor
1983-10-01
Doors; wall openings for doors with dimensions in accordance with DIN 4172
DIN
DIN
DIN
DIN 38402-16:1987-08
En Vigor
1987-08-01
German standard methods for the examination of water, waste water and
sludge; general information (group A); sampling of sea water (A 16)
DIN
DIN 42539-2:1968-08
En Vigor
1968-08-01
Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3
N for 250 A to 3150 A, Single Parts
DIN
DIN 51701-1:2007-12
En Vigor
2007-12-01
Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN
DIN EN ISO 3377-1:2012-03
En Vigor
2012-03-01
Leather - Physical and mechanical tests - Determination of tear load -
Part 1: Single edge tear (ISO 3377-1:2011); German version EN ISO
3377-1:2011 / Note: To be replaced by DIN EN ISO 3377-1 (2026-05).
DIN
DIN EN ISO 8420 Berichtigung 1:2008-06
En Vigor
2008-06-01
Animal and vegetable fats and oils - Determination of content of polar
compounds (ISO 8420:2002); German version EN ISO 8420:2002, Corrigendum
to DIN EN ISO 8420:2002-08; German version EN ISO 8420:2002/AC:2008
DIN
DIN 46391-2:2018-05
En Vigor
2018-05-01
Delivery drums for cables and ropes - Part 2: Technical terms of
delivery for wooden drums / Note: DIN 46391-2 (1981-04) remains valid
alongside this standard until 2020-04-30.
DIN
DIN 71803 Berichtigung 1:2019-06
En Vigor
2019-06-01
Angle joints with screw studs, with rivet studs; Corrigendum 1
DIN
DIN EN 2240-053:2011-05
En Vigor
2011-05-01
Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308 -
Product standard; German and English version EN 2240-053:2011 / Note:
Applies in conjunction with DIN EN 2756 (2010-09).
DIN
DIN 65557:1989-09
En Vigor
1989-09-01
Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ
thread, fully threaded, titanium alloy; nominal tensile strength 1100
MPa, for temperatures up to 315 °C
DIN
DIN 55201-2:1987-12
En Vigor
1987-12-01
Machine tools; pallets for machine tools; nominal sizes over 800 mm;
form B
DIN
DIN EN 14203:2004-07
En Vigor
2004-07-01
Blinds and shutters - Capability for use of gears with crank handle -
Requirements and test methods; German version EN 14203:2004
DIN
DIN 55610:1986-09
En Vigor
1986-09-01
Testing of pigments and solvent-soluble dyestuffs; determination of
unsulfonated primary aromatic amines
DIN
DIN EN ISO 1452-2:2010-04
En Vigor
2010-04-01
Plastics piping systems for water supply and for buried and above-ground
drainage and sewerage under pressure - Unplasticized poly(vinyl
chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009); German version EN
ISO 1452-2:2009
DIN
DIN 29657:1991-01
En Vigor
1991-01-01
Aerospace; seamless structural tubes in steel and nickel alloys;
technical specification
DIN
DIN
DIN EN ISO 16283-2:2020-11
En Vigor
2020-11-01
Acoustics - Field measurement of sound insulation in buildings and of
building elements - Part 2: Impact sound insulation (ISO 16283-2:2020);
German version EN ISO 16283-2:2020
DIN
DIN 15018-3:1984-11
En Vigor
1984-11-01
Cranes; principles relating to steel structures; design of cranes on vehicles
DIN
DIN 24296:1998-01
En Vigor
1998-01-01
Pumps and pump units for liquids - Spare parts - Selection and procurement
DIN
DIN 1414-2:1998-06
En Vigor
1998-06-01
Technical specifications for twist drills of high-speed steel - Part 2: Inspection
DIN
DIN EN ISO 52017-1:2018-04
En Vigor
2018-04-01
Energy performance of buildings - Sensible and latent heat loads and
internal temperatures - Part 1: Generic calculation procedures (ISO
52017-1:2017); German version EN ISO 52017-1:2017
DIN
DIN 22100-5:2025-09
En Vigor
2025-09-01
Plastics articles and materials for use in underground mines - Part 5:
Tubes, tube isolations, hoses, sheeting, coated/uncoated tissue,
brattice materials and lagging mats - Safety requirements, testings,
marking / Note: DIN 22100-5 (2010-10) and DIN 22100-6 (2010-10) remain
valid alongside this standard until 2026-02-28.
DIN
DIN 9680:1991-01
En Vigor
1991-01-01
Agricultural tractors and machinery; electric power transmission;
dimensions, requirements
DIN
DIN EN ISO 13468-1:2019-10
En Vigor
2019-10-01
Plastics - Determination of the total luminous transmittance of
transparent materials - Part 1: Single-beam instrument (ISO
13468-1:2019); German version EN ISO 13468-1:2019
DIN
DIN 51589-1:1991-03
En Vigor
1991-03-01
Determination of water separation ability of lubricating oils and
low-flammability fluids after contact with steam
DIN
DIN 85003-7:2011-02
En Vigor
2011-02-01
Technical specifications for valves for shipboard use - Part 7:
Diaphragm valves
DIN
DIN EN 13578:2004-03
En Vigor
2004-03-01
Products and systems for the protection and repair of concrete structure
- Test method - Compatibility on wet concrete; German version EN 13578:2003
DIN
DIN EN ISO/IEC 15423:2010-12
En Vigor
2010-12-01
Information technology - Automatic identification and data capture
techniques - Bar code scanner and decoder performance testing (ISO/IEC
15423:2009); English version EN ISO/IEC 15423:2010
DIN
DIN EN ISO 18496:2021-12
En Vigor
2021-12-01
Brazing - Fluxes for brazing - Classification and technical delivery
conditions (ISO 18496:2020); German version EN ISO 18496:2021
DIN
DIN
DIN 16620-2:1991-09
En Vigor
1991-09-01
Printing technology; printing plates for offset printing; terminology
and principles of measurement techniques
DIN
DIN EN ISO 11127-4:2021-05
En Vigor
2021-05-01
Preparation of steel substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives - Part
4: Assessment of hardness by a glass slide test (ISO 11127-4:2020);
German version EN ISO 11127-4:2020
DIN
DIN EN ISO 24265:2021-02
En Vigor
2021-02-01
Footwear - Test methods for uppers - Resistance to rubbing using a
rubber strip (ISO 24265:2020); German version EN ISO 24265:2020
DIN
DIN EN 14072:2004-02
En Vigor
2004-02-01
Glass in furniture - Test methods; German version EN 14072:2003
DIN
DIN EN ISO 6781-3:2016-05
En Vigor
2016-05-01
Performance of buildings - Detection of heat, air and moisture
irregularities in buildings by infrared methods - Part 3: Qualifications
of equipment operators, data analysts and report writers (ISO
6781-3:2015); German version EN ISO 6781-3:2015
DIN
DIN 53842-1:1976-04
En Vigor
1976-04-01
Testing of textiles; knot tensile test for single and plied yarns
DIN
DIN EN ISO 11143:2008-10
En Vigor
2008-10-01
Dentistry - Amalgam separators (ISO 11143:2008); German version EN ISO 11143:2008
DIN
DIN 25409 Beiblatt 1:2015-12
En Vigor
2015-12-01
Remote handling devices for use behind shielding walls; Supplement 1:
Recommendations for use
DIN
DIN EN 203-2-8:2006-02
En Vigor
2006-02-01
Gas heated catering equipment - Part 2-8: Specific requirements - Brat
pans and paëlla cookers; German version EN 203-2-8:2005 / Note: To be
replaced by DIN EN 203-2-8 (2014-08), DIN EN 203-2-8 (2025-03).
DIN
DIN/TR 55692-3:2022-02
En Vigor
2022-02-01
Coatings on plastics and composites - Part 3: Constant climate and
alternating climate tests
DIN
DIN EN ISO 4788:2005-08
En Vigor
2005-08-01
Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005);
German version EN ISO 4788:2005
DIN
DIN 44897-1:1977-12
En Vigor
1977-12-01
Stationary electric water heaters; dimensions and permissible pressure
losses for mixing batteries for open-outlet water heaters above table
DIN
DIN EN 10312:2005-12
En Vigor
2005-12-01
Welded stainless steel tubes for the conveyance of water and other
aqueous liquids - Technical delivery conditions; German version EN
10312:2002 + A1:2005
DIN
DIN
DIN EN 10294-2:2012-04
En Vigor
2012-04-01
Hollow bars for machining - Technical delivery conditions - Part 2:
Stainless steels with specified machinability properties; German version
EN 10294-2:2012
DIN
DIN EN 12829:2011-07
En Vigor
2011-07-01
Surface active agents - Preparation of water with known calcium and
magnesium hardness; German version EN 12829:2011
DIN
DIN EN 61300-3-16:2003-09
En Vigor
2003-09-01
Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - Part 3-16: Examinations and measurements;
Endface radius of spherically polished ferrules (IEC 61300-3-16:2003);
German version EN 61300-3-16:2003 / Note: DIN EN 61300-3-16 (1998-09)
remains valid alongside this standard until 2005-12-01.
DIN
DIN 47600-6:1974-10
En Vigor
1974-10-01
Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of
Joint Boxes with Plastic Insulated Cables 0.6/1 kV
DIN
DIN 15049:1958-09
En Vigor
1958-09-01
Cranes with electric hoists or similar hoist gear; track wheels with
plain bearings
DIN
DIN EN 300395-1:2005-07
En Vigor
2005-07-01
Terrestrial Trunked Radio (TETRA) - Speech codec for full-rate traffic
channel - Part 1: General description of speech functions (Endorsement
of the English version EN 300395-1 V1.2.1 (2005-01) as German standard)
/ Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN ISO 6974-2:2012-11
En Vigor
2012-11-01
Natural gas - Determination of composition and associated uncertainty by
gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012);
German version EN ISO 6974-2:2012
DIN
DIN
DIN 4342:1979-12
En Vigor
1979-12-01
Gas turbines; standard reference conditions, standard power and
performance data
DIN
DIN 3866:1990-06
En Vigor
1990-06-01
Refrigeration; threaded stem; 90° flared flanges for solderless
compression couplings rated for PN 40
DIN
DIN EN 3005:2005-09
En Vigor
2005-09-01
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting
nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated -
Classification: 1210 MPa (at ambient temperature)/730 °C - Technical
specification; German and English version EN 3005:2004
DIN
DIN
