Filtrar:
DIN
DIN EN 4012:2006-10
En Vigor
2025-12-01
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting
nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated -
Classification: 1550 MPa (at ambient temperature)/425 °C; German and
English version EN 4012:2004
DIN
DIN EN 13480-5/A1:2025-12
En Vigor
2025-12-01
Metallic industrial piping - Part 5: Inspection and testing; German and
English version EN 13480-5:2024/prA1:2025 / Note: Date of issue
2025-11-07*Intended as an amendment to DIN EN 13480-5 (2024-12).
DIN
DIN EN 14211:2012-11
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German
version EN 14211:2012
DIN
DIN CEN/TS 18084:2025-12
En Vigor
2025-12-01
Road vehicles - Post Shredder Technology recycling - Design
recommendations for plastic products; German version CEN/TS 18084:2025
DIN
DIN EN ISO 23308-6:2024-03
En Vigor
2025-12-01
Energy efficiency of industrial trucks - Test methods - Part 6:
Container straddle carrier (ISO/DIS 23308-6:2024); German and English
version prEN ISO 23308-6:2024 / Note: Date of issue 2024-02-16
DIN
DIN 4753-3:2025-02
En Vigor
2025-12-01
Water heaters, water heating installations and storage water heaters for
drinking water - Part 3: Corrosion protection on the water side by
enamelling and cathodic protection - Requirements and testing
DIN
DIN EN 13763-11:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
11: Determination of resistance to damage by dropping of detonators and
relays; German and English version prEN 13763-11:2021 / Note: Date of
issue 2021-04-30
DIN
DIN EN 15956:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of phosphorus soluble in mineral
acids; German and English version prEN 15956:2025 / Note: Date of issue
2025-11-07*Intended as replacement for DIN EN 15956 (2011-12).
DIN
DIN EN IEC 60384-22:2025-12
En Vigor
2025-12-01
Fixed capacitors for use in electronic equipment - Part 22: Sectional
specification - Fixed surface mount multilayer capacitors of ceramic
dielectric, Class 2 (IEC 60384-22:2024); German version EN IEC
60384-22:2024 / Note: DIN EN IEC 60384-22 (2019-09) remains valid
alongside this standard until 2027-07-26.
DIN
DIN EN IEC 63479-2:2025-12
En Vigor
2025-12-01
Infotainment Services for Public Vehicles (PVIS) - Part 2: Requirements
(IEC 100/4261/CDV:2025); German and English version prEN IEC
63479-2:2025 / Note: Date of issue 2025-11-21
DIN
DIN 4261-1:2025-12
En Vigor
2025-12-01
Small sewage treatment plants - Part 1: Plants for waste water pretreatment
DIN
DIN EN 13763-18:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
18: Determination of series firing current of electric detonators;
German and English version prEN 13763-18:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 3170:2004-06
En Vigor
2025-12-01
Petroleum liquids - Manual sampling (ISO 3170:2004); German version EN
ISO 3170:2004
DIN
DIN
DIN EN 13763-13:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
13: Determination of resistance of electric detonators to electrostatic
discharge; German and English version prEN 13763-13:2021 / Note: Date of
issue 2021-04-23
DIN
DIN EN ISO 3274:1998-04
En Vigor
2025-12-01
Geometrical Product Specifications (GPS) - Surface texture: Profile
method - Nominal characteristics of contact (stylus) instruments (ISO
3274:1996); German version EN ISO 3274:1997
DIN
DIN 5034-7:2025-12
En Vigor
2025-12-01
Simplified determination of minimum window sizes for living spaces /
Note: Date of issue 2025-10-31
DIN
DIN EN ISO 11980:2025-12
En Vigor
2025-12-01
Ophthalmic optics - Contact lenses and contact lens care products -
Requirements and guidance for clinical investigations (ISO 11980:2025);
German version EN ISO 11980:2025
DIN
DIN EN ISO 25178-605:2023-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
605: Design and characteristics of non-contact (point autofocus probe)
instruments (ISO/DIS 25178-605:2023); German and English version prEN
ISO 25178-605:2023 / Note: Date of issue 2023-10-27
DIN
DIN EN 15330-4:2025-12
En Vigor
2025-12-01
Surfaces for sports areas - Synthetic turf and needle-punched surfaces
primarily designed for outdoor use - Part 4: Specification for shockpads
used with synthetic turf, needle-punch and textile sports surfaces;
German version EN 15330-4:2022
DIN
DIN EN ISO 9185:2025-12
En Vigor
2025-12-01
Protective clothing - Assessment of resistance of materials to molten
metal splash (ISO 9185:2025); German version EN ISO 9185:2025
DIN
DIN EN ISO 14732:2013-12
En Vigor
2025-12-01
Welding personnel - Qualification testing of welding operators and weld
setters for mechanized and automatic welding of metallic materials (ISO
14732:2013); German version EN ISO 14732:2013
DIN
DIN EN 13206:2020-04
En Vigor
2025-12-01
Plastics - Thermoplastic covering films for use in agriculture and
horticulture; German version EN 13206:2017+A1:2020
DIN
DIN EN 18292:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Determination of the dry matter content; German
and English version prEN 18292:2026 / Note: Date of issue 2025-11-14
DIN
DIN EN ISO/ASTM 52938-1:2023-07
En Vigor
2025-12-01
Additive manufacturing of metals - Environment, health and safety - Part
1: Safety requirements for PBF-LB machines (ISO/ASTM DIS 52938-1:2023);
German and English version prEN ISO/ASTM 52938-1:2023 / Note: Date of
issue 2023-06-09
DIN
DIN EN 14211:2025-12
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German
version EN 14211:2024
DIN
DIN EN 15957:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of phosphorus which is soluble in
neutral ammonium citrate; German and English version prEN 15957:2026 /
Note: Date of issue 2025-11-07*Intended as replacement for DIN EN 15957 (2011-12).
DIN
DIN/TS 26059-1:2021-04
En Vigor
2025-12-01
Components for overfill protection devices for liquids hazardous to
aquatic environment Part 1: Manufacture of sensors and transmitters
for overfill protection systems as well as components for
self-sufficient overfill protection
DIN
DIN EN 16584-1:2022-06
En Vigor
2025-12-01
Railway applications - Design for PRM use - General requirements - Part
1: Contrast; German and English version prEN 16584-1:2022 / Note: Date
of issue 2022-05-13
DIN
DIN 45687:2006-05
En Vigor
2025-12-01
Acoustics - Software products for the calculation of the sound
propagation outdoors - Quality requirements and test conditions
DIN
DIN EN 14212 Berichtigung 1:2014-08
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of sulphur dioxide by ultraviolet fluorescence; German version EN
14212:2012, Corrigendum to DIN EN 14212:2012-11
DIN
DIN EN ISO 32679:2025-07
En Vigor
2025-12-01
Non-destructive testing - Radiographic testing - Determination of the
size of industrial radiographic gamma sources (ISO/DIS 32679:2024);
German and English version prEN ISO 32679:2025 / Note: Date of issue 2025-05-30
DIN
DIN EN 17936:2023-01
En Vigor
2025-12-01
Railway applications - Acoustics - Measurement of source terms for
environmental noise calculations; German and English version prEN
17936:2022 / Note: Date of issue 2022-12-02
DIN
DIN EN ISO 4255:2024-11
En Vigor
2025-12-01
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Mechanical properties of ceramic composites at high temperature -
Determination of uniaxial tensile properties of tubes (ISO/DIS
4255:2024); German and English version prEN ISO 4255:2024 / Note: Date
of issue 2024-10-18
DIN
DIN EN 13630-2:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 2:
Determination of thermal stability of detonating cords and safety fuses;
German and English version prEN 13630-2:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 3210:2025-12
En Vigor
2025-12-01
Anodizing of aluminium and its alloys - Assessment of quality of sealed
anodic oxidation coatings by measurement of the loss of mass after
immersion in acid solution(s) (ISO 3210:2025); German version EN ISO 3210:2025
DIN
DIN 4271-2:2025-12
En Vigor
2025-12-01
Manhole tops with vents, class B 125 - Part 2: Particulars
DIN
DIN EN ISO/IEEE 11073-10425:2024-06
En Vigor
2025-12-01
Health Informatics - Device interoperability - Part 10425: Personal
health device communication - Device specialization - Continuous glucose
monitor (CGM) (ISO/IEEE FDIS 11073-10425:2024); English version prEN
ISO/IEEE 11073-10425:2024 / Note: Date of issue 2024-05-24
DIN
DIN EN ISO 18984:2024-03
En Vigor
2025-12-01
Ball valves for thermoplastics piping systems for hot and cold water
installations under pressure - Types, dimensions and requirements
(ISO/DIS 18984:2024); German and English version prEN ISO 18984:2024 /
Note: Date of issue 2024-02-02
DIN
DIN EN ISO 24223:2025-12
En Vigor
2025-12-01
Milk and milk products - Guidance on sample preparation for physical and
chemical testing (ISO/DIS 24223:2025); German and English version prEN
ISO 24223:2025 / Note: Date of issue 2025-10-31*Intended as replacement
for DIN EN ISO 24223 (2022-03).
DIN
DIN EN 13763-12:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 12:
Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003
DIN
DIN ISO 10816-21:2015-08
En Vigor
2025-12-01
Mechanical vibration - Evaluation of machine vibration by measurements
on non-rotating parts - Part 21: Horizontal axis wind turbines with
gearbox (ISO 10816-21:2015)
DIN
DIN ISO 362-1:2025-12
En Vigor
2025-12-01
Acoustics - Engineering method for measurement of noise emitted by
accelerating road vehicles - Part 1: M and N categories (ISO 362-1:2022)
DIN
DIN EN IEC 63267-2-1:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces for enhanced macro bend multimode fibres - Part 2-1:
Connection parameters of physically contacting 50 µm core diameter
fibres - Non-angled (IEC 63267-2-1:2024); German version EN IEC 63267-2-1:2024
DIN
DIN EN ISO/IEEE 11073-10700:2024-06
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10700: Point?of?care
medical device communication - Standard for base requirements for
participants in a service?oriented device connectivity (SDC) system
(ISO/IEEE FDIS 11073-10700:2024); English version prEN ISO IEEE
11073-10700:2024 / Note: Date of issue 2024-05-24
DIN
DIN EN 13630-12:2002-12
En Vigor
2025-12-01
Explosives for civil uses - Detonation cords and safety fuses - Part 12:
Determination of burning duration of safety fuses; German version EN 13630-12:2002
DIN
DIN EN 13630-5:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 5:
Determination of resistance to abrasion of detonating cords; German and
English version prEN 13630-5:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 8655-6:2025-12
En Vigor
2025-12-01
Piston-operated volumetric apparatus - Part 6: Gravimetric reference
measurement procedure for the determination of volume (ISO 8655-6:2022,
Corrected version 2022-06); German version EN ISO 8655-6:2022
DIN
DIN EN 13630-4:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 4:
Verification of insensitiveness to impact of detonating cords; German
version EN 13630-4:2025
DIN
DIN EN ISO 22359:2025-12
En Vigor
2025-12-01
Security and resilience - Guidelines for hardened protective shelters
(ISO 22359:2024); German version EN ISO 22359:2025
DIN
DIN 6855-101:2025-12
En Vigor
2025-12-01
Acceptance testing of nuclear medical measuring systems - Part 101:
Radiation counting systems for measurements in vivo and in vitro
DIN
DIN EN 13763-12:2021-06
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
12: Determination of resistance to hydrostatic pressure; German and
English version prEN 13763-12:2021 / Note: Date of issue 2021-04-30
DIN
DIN EN ISO 25178-604:2013-12
En Vigor
2025-12-01
Geometrical product specification (GPS) - Surface texture: Areal - Part
604: Nominal characteristics of non-contact (coherence scanning
interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
DIN
DIN 4567-2:2025-12
En Vigor
2025-12-01
Ladders for special professional use - Part 2: Ladders for window
cleaning made of wood or aluminium
DIN
DIN ISO 6289:2024-09
En Vigor
2025-12-01
Skis - Vocabulary (ISO/DIS 6289:2024); Text in German and English /
Note: Date of issue 2024-08-09
DIN
DIN EN ISO 5832-2:2025-12
En Vigor
2025-12-01
Implants for surgery - Metallic materials - Part 2: Unalloyed titanium
(ISO 5832-2:2025); German version EN ISO 5832-2:2025
DIN
DIN 86004-1:2025-12
En Vigor
2025-12-01
Ships and marine technology - Low-corrosion design, measures and
operation of pipework - Part 1: CuNiFe piping systems / Note: Date of
issue 2025-11-07*Intended as replacement for DIN 86004-1 (2016-08).
DIN
DIN EN 3381:2025-12
En Vigor
2025-12-01
Aerospace series - Screws, 100° countersunk normal head, offset
cruciform recess, close tolerance normal shank, short thread, in
titanium alloy, anodized, MoS<(Index)2> lubricated -
Classification: 1 100 MPa (at ambient temperature)/315 °C; German and
English version EN 3381:2025
DIN
DIN EN ISO 19085-9:2020-08
En Vigor
2025-12-01
Woodworking machines - Safety - Part 9: Circular saw benches (with and
without sliding table) (ISO 19085-9:2019); German version EN ISO 19085-9:2020
DIN
DIN 5480-16:2025-12
En Vigor
2025-12-01
Involute splines based on reference diameters - Part 16: Tools / Note:
Date of issue 2025-11-21*Intended as replacement for DIN 5480-16
(2006-03), DIN 5480-16 Berichtigung 1 (2009-01).
