Filtrar:
DIN
DIN 3862:1995-10
En Vigor
1995-10-01
Non-soldering compression couplings - Double conical ring - Design and
type of port end X
DIN
DIN 6160:2019-06
En Vigor
2019-06-01
Ophthalmic optics and instruments - Anomaloscopes for the diagnosis of
congenital defects of red-green-colour vision and aquired disorders -
Fundamental requirements; Text in German and English
DIN
DIN EN 13807:2025-01
En Vigor
2025-01-01
Transportable gas cylinders - Battery vehicles and multiple-element gas
containers (MEGCs) - Design, manufacture, identification and testing;
German and English version prEN 13807:2024 / Note: Date of issue
2024-12-06*Intended as replacement for DIN EN 13807 (2017-05).
DIN
DIN CEN/TR 17081:2019-04;DIN SPEC 18146:2019-04
En Vigor
2019-04-01
Design of fastenings for use in concrete - Plastic design of fastenings
with headed and post-installed fasteners; German version CEN/TR 17081:2018
DIN
DIN EN IEC 61007 Berichtigung 1:2021-11
En Vigor
2021-11-01
Transformers and inductors for use in electronic and telecommunication
equipment - Measuring methods and test procedures (IEC 61007:2020 +
COR1:2021); German version EN IEC 61007:2020 + AC:2021; Corrigendum 1
DIN
DIN EN 1993-1-4/NA:2020-11
En Vigor
2020-11-01
National Annex - Nationally determined parameters - Eurocode 3: Design
of steel structures - Part 1-4: General rules - Supplementary rules for
stainless steels / Note: Applies in conjunction with DIN EN 1993-1-4
(2015-10).*To be replaced by DIN EN 1993-1-4/NA (2026-04).
DIN
DIN EN 13938-5:2026-03
En Vigor
2026-03-01
Explosives for civil uses - Propellants and rocket propellants - Part 5:
Verification of safe functioning of solid rocket propellants used in
small rocket motors; German version EN 13938-5:2025
DIN
DIN EN 15942:2022-04
En Vigor
2022-04-01
Sustainability of construction works - Environmental product
declarations - Communication format business-to-business; German version
EN 15942:2021
DIN
DIN 54439:2018-03
En Vigor
2018-03-01
Textiles - Methods for the determination of N-N-dimethylacetamide (DMAc)
and N,N-dimethylformamide (DMF) in man-made fibres of polyacrylonitrile,
polyurethane and aromatic polyamide fibres
DIN
DIN 53126:2011-11
En Vigor
2011-11-01
Testing of paper and board - Determination of the writing properties by ink
DIN
DIN 19262:2018-02
En Vigor
2018-02-01
pH measurement - Plug socket and plug shielded for pH electrodes and pH
combination electrodes
DIN
DIN
DIN EN 1559-3:2025-10
En Vigor
2025-10-01
Founding - Technical conditions of delivery - Part 3: Additional
requirements for iron castings; German and English version prEN
1559-3:2025 / Note: Date of issue 2025-08-29*Intended as replacement for
DIN EN 1559-3 (2012-01).
DIN
DIN EN 4168:2006-11
En Vigor
2006-11-01
Aerospace series - Clips, spring tension, three parts - Outer clips in
heat resisting steel FE-PA2601 (A286); German and English version EN 4168:2004
DIN
DIN EN 18057:2025-08
En Vigor
2025-08-01
Food authenticity - Quantitation of roe deer DNA relative to mammalian
DNA in meat and meat products by real-time PCR; German version EN 18057:2025
DIN
DIN EN 1646-1:2026-03
En Vigor
2026-03-01
Leisure accommodation vehicles - Motor caravans - Part 1: Habitation
requirements relating to health and safety; German version EN
1646-1:2025 / Note: DIN EN 1646-1 (2018-04) remains valid alongside this
standard until 2027-06-30.
DIN
DIN 6868-16:2019-05
En Vigor
2019-05-01
Image quality assurance in diagnostic X-ray departments - Part 16:
Documentation of clinical image processing parameters in digital X-ray systems
DIN
DIN EN 16602-70-16:2022-02
En Vigor
2022-02-01
Space engineering - Adhesive bonding for spacecraft and launcher
applications; English version EN 16602-70-16:2021
DIN
DIN
DIN EN 13586:2021-06
En Vigor
2021-06-01
Cranes - Access; German version EN 13586:2020 / Note: To be replaced by
DIN EN 13586 (2025-05).
DIN
DIN EN 62379-5-1:2015-10
En Vigor
2015-10-01
Common control interface for networked digital audio and video products
- Part 5-1: Transmission over networks - General (IEC 62379-5-1:2014);
German version EN 62379-5-1:2014
DIN
DIN EN 12020-2:2023-02
En Vigor
2023-02-01
Aluminium and aluminium alloys - Extruded precision profiles in alloys
EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form;
German version EN 12020-2:2022
DIN
DIN ISO 3569:1978-08
En Vigor
1978-08-01
Continuous Mechanical Handling Equipment; Classification of Unit Loads
DIN
DIN 52161-1:2006-06
En Vigor
2006-06-01
Testing of wood preservatives - Detection of wood preservatives in wood
- Sampling from structural timber in service
DIN
DIN 10500:2019-01
En Vigor
2019-01-01
Food hygiene - Sales vehicles and mobile sales stands for perishable
foodstuffs - Hygiene requirements, testing
DIN
DIN EN ISO 3823-1:1999-03
En Vigor
1999-03-01
Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO
3823-1:1997); German version EN ISO 3823-1:1998 / Note: To be replaced
by DIN EN ISO 3823 (2026-04).
DIN
DIN 7081:1999-05
En Vigor
1999-05-01
Pressure resistant oblong sight glasses of borosilicate glass without
limitation in the range of low temperature
DIN
DIN EN 515:2017-05
En Vigor
2017-05-01
Aluminium and aluminium alloys - Wrought products - Temper designations;
German version EN 515:2017
DIN
DIN
DIN EN 15293:2018-10
En Vigor
2018-10-01
Automotive fuels - Automotive ethanol (E85) fuel - Requirements and test
methods; German version EN 15293:2018
DIN
DIN EN IEC 60966-4-2:2023-10
En Vigor
2023-10-01
Radio frequency and coaxial cable assemblies - Part 4-2: Detail
specification for semi rigid cable assemblies (jumper) - Frequency range
up to 6 000 MHz, type 50-9 semi-rigid coaxial cable (IEC
60966-4-2:2022); German version EN IEC 60966-4-2:2022
DIN
DIN 3973-1:2017-02
En Vigor
2017-02-01
Tolerances of worm wheel hobs - Part 1: Fundamental principles
DIN
DIN 74253:1994-01
En Vigor
1994-01-01
Braking equipment for motor vehicles and trailers; graphic symbols for
piping diagrams
DIN
DIN 43735:2011-06
En Vigor
2011-06-01
Process control technology - Electrical temperature sensors -
Replaceable inserts for RTDs and thermocouples
DIN
DIN EN 12370:2020-05
En Vigor
2020-05-01
Natural stone test methods - Determination of resistance to salt
crystallisation; German version EN 12370:2020
DIN
DIN
DIN EN 62503 Beiblatt 1-1:2010-11
En Vigor
2010-11-01
Guideline for synchronization of audio and video - Part 1-1: Measurement
methods for synchronization of audio and video equipment and systems -
General (IEC/TS 62312-1-1:2008)
DIN
DIN EN 13553:2017-10
En Vigor
2017-10-01
Resilient floor coverings - Polyvinyl chloride floor coverings for use
in special wet areas - Specification; German version EN 13553:2017
DIN
DIN EN 50011:1978-05
En Vigor
1978-05-01
Low-voltage Switchgear and Controlgear for Industrial Use; Terminal
Marking, Distinctive Number and Distinctive Letter for Particular
Contactor Relays
DIN
DIN EN 14261:2003-12
En Vigor
2003-12-01
Derivatives from coal pyrolysis - Coal tar and pitch based binders and
related products: Refractory binders - Characteristics and test methods;
German version EN 14261:2003
DIN
DIN 51524-1:2017-06
En Vigor
2017-06-01
Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils, Minimum requirements
DIN
DIN 20636:2001-06
En Vigor
2001-06-01
Monorails for mining - Suspension claws - Requirements and testing
DIN
DIN EN 1305:2018-05
En Vigor
2018-05-01
Inland navigation vessels - Connections for the discharge of oily
mixture; German version EN 1305:2018
DIN
DIN 33880:2001-09
En Vigor
2001-09-01
Information technology - Voice Control Application Programming Interface (VOCAPI)
DIN
DIN 65436:1989-11
En Vigor
1989-11-01
Aerospace; standard quality (STQ) and disc quality (DQ) of titanium and
titanium alloys; requirements and tests
DIN
DIN EN 13856:2002-08
En Vigor
2002-08-01
Minimum requirements for the content of the user manual for automotive
LPG systems; German version EN 13856:2002 / Note: To be replaced by DIN
EN 13856 (2024-11).
DIN
DIN 68861-7:2001-04
En Vigor
2001-04-01
Furniture surfaces - Part 7: Behaviour subjection to dry heat
DIN
DIN EN 1366-1:2020-11
En Vigor
2020-11-01
Fire resistance tests for service installations - Part 1: Ventilation
ducts; German version EN 1366-1:2014+A1:2020 / Note: Applies in
conjunction with DIN EN 1363-1 (2020-05).
DIN
DIN EN 14694:2017-07
En Vigor
2017-07-01
Flexible sheets for waterproofing - Waterproofing of concrete bridge
decks and other concrete surfaces trafficable by vehicles -
Determination of resistance to dynamic water pressure after damage by
pre-treatment; German version EN 14694:2017
DIN
DIN
DIN 9861-2:1993-08
En Vigor
1993-08-01
Round punches with stepped shaft up to 5,5 mm cutting diameter
DIN
DIN EN 16798-7:2017-11
En Vigor
2017-11-01
Energy performance of buildings - Ventilation for buildings - Part 7:
Calculation methods for the determination of air flow rates in buildings
including infiltration (Modules M5-5); German version EN 16798-7:2017
DIN
DIN EN IEC 60384-17:2019-12
En Vigor
2019-12-01
Fixed capacitors for use in electronic equipment - Part 17: Sectional
specification - Fixed metallized polypropylene film dielectric AC and
pulse capacitors (IEC 60384-17:2019); German version EN IEC
60384-17:2019 / Note: DIN EN 60384-17 (2006-07) remains valid alongside
this standard until 2022-04-22.
DIN
DIN 58725:2011-07
En Vigor
2011-07-01
Production in optical engineering - Screwed connection with fitting part
DIN
DIN EN 16795:2016-03
En Vigor
2016-03-01
Plastics - Method for estimating heat build up of flat surfaces by
simulated solar radiation; German version EN 16795:2015
DIN
DIN 58736-2:2001-08
En Vigor
2001-08-01
Production in optical engineering - Centering bells - Part 2: With
cylindrical fitting dimension 30 mm and 46 mm for inner connection
DIN
DIN EN 4805:2017-08
En Vigor
2017-08-01
Aerospace series - Flange couplings - Weld coupling, straight, in heat
resisting steel - Inch series; German and English version EN 4805:2017
DIN
DIN 2283-2:2001-12
En Vigor
2001-12-01
Geometrical Product Specifications (GPS) - "NOT GO" screw plug
gauges - Part 2: "NOT GO" workshop gauges, check and setting
plug gauges for ISO general purpose metric screw threads over 40 mm up
to 200 mm nominal diameter
DIN
DIN EN 3892:2002-07
En Vigor
2002-07-01
Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding;
German version EN 3892:2001
DIN
DIN EN 2811:2017-03
En Vigor
2017-03-01
Aerospace series - Nuts, hexagon, slotted/ castellated in steel cadmium
plated - Classification: 1100 MPa/235 °C; German and English version EN 2811:2016
